Knowde Enhanced TDS
Identification & Functionality+
Features & Benefits+
- Co-emulsifier suitable for almost all monomers emulsion
- Improve latex stability against electrolyte and temperature shock
- Positive influence over the polymer shelf-life
- Lower particle size of the resulting latex
- Higher gloss
Applications & Uses+
NONIDAC 11P 30-70 is used as non-ionic emulsifier in emulsion polymerization to produce stable latexes of styrene/acrylate, VAM (vinyl acetate monomer) and copolymers. NONIDAC 11P 30-70 is used alone or in combination with other surfactant like ANIODAC 11P 7-27 or DACLOR 27-20-23.
|Value||Units||Test Method / Conditions|
|Colour||max. 50||APHA||RCM 3668|
|Hydroxyl Number||36.0 – 40.0||mg KOH / g||RCM 3851|
|pH (5%)||5.0 – 7.0||-||RCM 3645|
|Dry Matter Content||69.0 – 71.0||% mass||RCM 3644|
|Pour Point||3.0||°C||ASTM D 97|
|Viscosity at 25°C||670.0||cSt||ASTM D7042|
|Density at 25°C||1.077||kg/m3||ASTM D7042|
Packaging & Availability+
NONIDAC 11P 30-70 is generally supplied in plastic drums, details on available packaging can be obtained from sales department.
Storage & Handling+
NONIDAC 11P 30-70 should be stored preferably in stainless steel. It is suggested to keep the product at temperature below 40°C, it is preferable to avoid heating above 60°C and to store under nitrogen in order to minimise yellowish phenomena. NONIDAC 11P 30-70 is clear liquid at room temperature and up to 15°C, at lower temperature turbidity and settling can occur. In case this happens, the entire amount of NONIDAC 11P 30-70 should be melted at temperature about 50°C and homogenized before use. NONIDAC 11P 30-70 does not contain any preservative. NONIDAC 11P 30-70 is not susceptible to microbial growth because of low water content. Shelf-life is 36 months from production date for product in its original and sealed packaging.