Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Chemical Name
- Industrial Additives Functions
- CAS No.
- 68439-48-5
- EC No.
- 807-372-0
- Technologies
Applications & Uses
- Markets
- Applications
- Industrial Additives End Use
Properties
- Physical Form
- Appearance
- Off-white solid
- Soluble in
- Water
- Typical Properties
Value | Units | Test Method / Conditions | |
Water Content | max. 0.5 | wt% | — |
SFT (500 ppm) | 54.0 | N/m | — |
Molecular Weight | 873.0 | g/mole | — |
Melting Range | 44-45 | °C | — |
Hydroxyl Number | 53-58 | mgKOH/g | — |
HLB | 12.4 | — | — |
Flash Point | min. 204 | °C | — |
Cloud Point (1% NaCl) | 65-67 | °C | — |
Average EO Content | 63.0 | wt% | — |
Packaging & Availability
- Packaging Information
Bulk Loading
All products can be delivered in bulk
Road
- 27 t per delivery for intermodal transportation
- 24 t per delivery for conventional road tank vehicles
Rail
- 25 t per delivery for two-axle tank wagons
- 55 t per delivery for four-axle tank wagons
Pastillated Products
- Delivery of ethoxylates for T9 – T150 products
- Disposable packaging
- Please protect against direct sunlight and environmental influence
In polyethylene bags
- Suitable for foodstuffs
- Filling quantity: 20 kg/bag
- Pallet capacity: 24 bags per CP5 pallet (8 layers of 3 bags each), pallet covered by stretch hood*
- Special packaging upon request
Filled Products
- Special packaging upon request
- Disposable packaging
- Please protect against direct sunlight and environmental influence
In steel drums
- Filling quantity: 160 to 180 kg/drum (depending on product)
- Pallet capacity: 4 drums (screw-cap or screw-lid drums) on a CP3 pallet covered by stretch hood*
- Closed under a nitrogen blanket
In Intermediate Bulk Containers (IBCs)
- Capacity of approximately 1 m3
- Pallet capacity: 1 container securely mounted onto a CP1 pallet
Storage & Handling
- Storage and Handling
Storage temperature of all MAGNATHOX T products
- 5 < T < 30°C
- 41 < T < 86°F
Storage temperature of all goods shipped in barrels or drums
- 5 < T < 30°C
- 41 < T < 86°F
- Plant components that come into contact with the product, e.g. pumps, pipes, tank containers etc. should be made of stainless steel where possible; aluminum plant components are unsuitable; petrol resistant hose connections can be used and should be rinsed thoroughly after use
- In the case of tank storage, inert gas blanketing is required
- Tank heating is required of all MAGNATHOX T products; tank temperature should not exceed 25°C above the setting point of the product; wall temperature of the heating coils should not exceed 100°C
- In order to prevent overheating of the product at the heating coils, the use of a stirring device in the tank is compulsory