Sasol MP45

Meta Para Cresol (85-91% max). It is used for wire enamel solvents, resins, feedstock for the production of meta-cresol and other chemical intermediates. The product is also called MP-Cresol 45. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Chemical Name: m-cresol, p-cresol

Chemical Family: Cresolic Compounds, Phenols, Phenols & Phenolics

  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Chemical Name
Base Chemicals Functions
CASE Ingredients Functions

Applications & Uses

Coating Type

Properties

Physical Form
Odor
Characteristic
Appearance
Yellow liquid
Typical Properties
ValueUnitsTest Method / Conditions
o-Cresol0.1mass %ASTM D5310
m,p-Cresols±86mass %ASTM D5310
m-Cresol43mass %ASTM D5310
Xylenol & Ethylphenols±13mass %ASTM D5310
Neutral Oil0.3mass %ASTM D5310
Nitrogen Bases (as Pyridine)±12ppmASTM D4471
Viscosity at 20°C5.07mPa.SASTM D445
Flash Point99°CASTM D93
Colour±70Pt-CoASTM D1209, ASTM D5386
Density at 20°C±1.035kg/LASTM D4052
Water0.1mass %ASTM D1364; ASTM E203
Phenol±0.1mass %ASTM D5310

Regulatory & Compliance

Packaging & Availability

Packaging Type
Packaging Information

Available in bulk (road tanker, ship, Isocontainer) and 200kg or 225kg nett new galvanized drums.

Storage & Handling

Storage And Handling

Safe Handling Advice

  • Avoid contact with skin and eyes.
  • Avoid inhalation of vapor or mist.
  • In case of insufficient ventilation, wear suitable respiratory equipment.
  • Wear personal protective equipment.

Requirements for Storage Areas and Containers

  • Keep locked up.Keep containers tightly closed in a dry, cool and well-ventilated place.
  • Keep away from sources of ignition - No smoking.

Depending upon storage conditions, they may absorb moisture from the air, darken in color over time, or leach low level metals from the storage vessel. This will be minimized, however, if the container remains sealed and the product is not exposed to air or excessive heating.

It is recommended that a sample of the product be tested to confirm compliance to test specifications following prolonged storage, especially under non-ideal storage conditions.

Refer the SDS for detailed information.