Products

PARAFOL single cut paraffin are an excellent choice when looking for a phase change material for latent heat storage applications including functional textiles and construction. PARAFOL single cut paraffin are an alternative choice when looking for non-polar solvents, oils or wax additives based on renewable resources for environmentally friendly formulation concepts.

SASOLWAX Spray 105-G EF is extra fine micronized FT Hardwax no softening in thin film solvent-based formulations, flexographic and paste inks and can coatings.

ISOFOL 24 is a primary, saturated alcohol with defined branching of the carbon chain. Such alcohols are chemically described as 2-alkyl-1-alkanols and are also referred to as Guerbet alcohols. It is a high-purity alcohol that offers excellent oxidative and color stability. Additionally, the twin, 100% linear alkyl branches of the ISOFOL alcohol give it a lower viscosity than dimer alcohols derived from oxo-alcohols. The unique chemical structure of ISOFOL alcohol also provides good solubility and solvency.

DISPERAL HP 14 is a high-purity, acid dispersible boehmite. It exhibits a unique combination of purity, consistency, and dispersibility that makes it an excellent material for use in colloidal applications. The Sasol range of dispersible boehmites has traditionally been used in application such as sol-gel ceramics, catalysis, refractory materials, rheology control, and surface frictionizing.

DISPAL 28AC2 is a modified boehmite alumina designed specifically for coatings and polymer applications. The key property enhancements in coatings formulations are corrosion inhibition and adhesion promotion. DISPAL 28AC2 is amenable to water and solvent-based paint applications and can be mixed directly into your formulation providing enhanced performance with ease.

SASOLWAX 6530SA is a qualified hydrocarbon wax yielding similar torque fusion response as fully refined 165F melt paraffin with benefit of reduced die drool (beard), faster heat transfer, slightly stiffer melt and higher output.

DISPAL T25N4-80 is a highly dispersible boehmite alumina made specifically for dispersing directly into water-based to make transparent solutions. These boehmites, which are nano-sized in the dispersed phase, exhibit a unique combination of purity, consistency and dispersibility that make them excellent materials for use in colloidal applications.

DISPERAL P2W is a high-purity, water dispersible boehmite. It exhibits a unique combination of purity, consistency, and dispersibility that makes it an excellent material for use in colloidal applications. The Sasol range of dispersible boehmites has traditionally been used in application such as sol-gel ceramics, catalysis, refractory materials, rheology control, and surface frictionizing.

DISPERAL 40 is a high-purity, acid dispersible boehmite. It exhibits a unique combination of purity, consistency, and dispersibility that makes it an excellent material for use in colloidal applications. The Sasol range of dispersible boehmites has traditionally been used in application such as sol-gel ceramics, catalysis, refractory materials, rheology control, and surface frictionizing.

Fischer-Tropsch high melting point wax available in coarse powder and pastille form.

Oxidised Fischer-Tropsch Hard Wax supplied as a coarse powder.

SASOLWAX C80N8 is a Micronized, FT Hardwax with a Congealing point 80°C and Particle size d50: 8µm d90:18µm for the use in Coatings and mold release.

SAFOL 23E2S is an Alkyl Ether Sulfate belonging to Sasol's Sulfates range of products. It is used in personal care as base surfactant exhibiting a high foaming power. It is used for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasolwax Spray 30 is a economical, fine micronized wax powder with good rub resistance and excellent slip and gloss performance.

SASOLWAX H1N4-G is a Micronized FT Hardwax has Particle size D50: 8µm D90: 18µm, provide slip and enhanced scratch/rub resistance and good overprintability in flexographic and gravure inks, paste inks, hydrophobicity as well as surface protection in Wood coatings, degasing and pin hole reduction in powder coatings.

Sasolwax Spray 105 is a high melting, high performance, micronized wax with excellent rub resistance, slip performance and good gloss.

Sasolwax Spray 30-G is an economical micronized wax powder with good rub resistance and excellent slip performance.

Sasolwax Spray 105-G is a high melting, high performance, micronized wax with excellent rub resistance and slip performance.

Sasol Chemicals SASOLWAX C80-G is a highly crystalline, micronized Fischer-Tropsch wax for the inks, paints, coatings and adhesives market. It supports formulations where defined melting behavior, surface protection and matting are required. SASOLWAX C80-G is used in powder coating formulations providing matting, slip, degassing, and improved transfer efficiency. With the melting point of 86 °C, low viscosity, and excellent hardness even at elevated temperatures SASOLWAX C80-G provides superior performance especially when post-dosed. SASOLWAX C80-G is also used in paints, wood coatings and corrosion protection formulations to modify surface and application properties.

DISPERAL HP 40 is a high-purity boehmite. It exhibits a unique combination of purity, consistency, and dispersibility that makes it an excellent material for use in colloidal applications. The Sasol range of dispersible boehmites has traditionally been used in application such as sol-gel ceramics, catalysis, refractory materials, rheology control, and surface frictionizing.

SASOLWAX H1N4 is a spherical micronized FT Hardwax, provide slip and enhanced scratch/rub resistance, gloss retention and good overprintability in flexographic and gravure inks, paste inks, hydrophobicity as well as surface protection in Wood coatings, degasing and pin hole reduction in powder coatings.

Micronized, oxidized and saponified FT Hardwax for the use in waterbased formulations providing lubricity as well as slip and scratch resistance in Inks-Paints and Coatings formulations.

Saponified Fischer Tropsch hard wax supplied in coarse powder.

DISPAL 10F4-80 is a highly dispersible boehmite alumina made specifically for dispersing directly into water-based formulations. The high dispersibility and high porosity of this material makes it ideal for high resolution coatings for a wide range of substrates. These boehmites, which are nano-sized in the dispersed phase, exhibit a unique combination of purity, consistency and dispersibility that make them excellent materials for use in colloidal applications.

SAFOL 23A70 is an Alkyl Ether Sulfate belonging to Sasol's Sulfates range of products. It is used in personal care as base surfactant exhibiting a high foaming power. It is used for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

AES 270N-II is an Alkyl Ether Sulfate belonging to Sasol's Sulfates range of products. It is used in personal care as base surfactant exhibiting a high foaming power. It is used for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

DISPAL 11N7-80 is a highly dispersible boehmite alumina made specifically for dispersing directly into water-based formulations. The high dispersibility and high porosity of this material makes it ideal for high resolution coatings for a wide range of substrates. These boehmites, which are nano-sized in the dispersed phase, exhibit a unique combination of purity, consistency and dispersibility that make them excellent materials for use in colloidal applications.

Oxidised Fischer Tropsch wax, available in coarse powder and pastille form.

SASOLWAX L6530A is extra fine micronized FT Hardwax provide slip and scratch resistance and good overprintability in flexographic and gravure inks, paste inks, hydrophobicity as well as surface protection in Wood coatings, degasing and pin hole reduction in powder coatings.

DISPERAL HP 14/7 is a high-purity, surface-modified boehmite. It exhibits a unique combination of purity, consistency, and dispersibility that makes it an excellent material for use in colloidal applications. The Sasol range of dispersible boehmites has traditionally been used in application such as sol-gel ceramics, catalysis, refractory materials, rheology control, and surface frictionizing.

GLICERODAC PO 70 is a polyalkylen glycol, based on glycerol, ethylene oxide and propylene oxide. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Extra fine Micronized, oxidized and saponified FT Hardwax, for use in waterbased formulations providing lubricity as well as slip and scratch resistance in Inks-Paints and Coatings formulations, especially thin films.

DISPAL 18N4-80 is a highly dispersible boehmite alumina made specifically for formulating inorganic binder and dispersed particle solutions. These boehmites, which are nano-sized in the dispersed phase, exhibit a unique combination of purity, consistency and dispersibility that make them excellent materials for use in colloidal applications.

DIONIL TR31 is an alkoxylated derivative, produced by Sasol Performance Chemicals at its Novaky Plant. The product has a molecular weight of approximately 300 and is part of the Dionil product range based on hexanol.

AELS-70 is an Alkyl Ether Sulfate belonging to Sasol's Sulfates range of products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

DISPERAL 80 is a high-purity, acid dispersible boehmite. It exhibits a unique combination of purity, consistency, and dispersibility that makes it an excellent material for use in colloidal applications. The Sasol range of dispersible boehmites has traditionally been used in application such as sol-gel ceramics, catalysis, refractory materials, rheology control, and surface frictionizing.