Products

PARAFOL 12 RSPO-MB is a high pure paraffin produced from oleochemical resourced under RSPO-MB requirements. It is a clear, colorless liquid. PARAFOL 12 RSPO-MB is a very light and highly spreading emollient and a readily biodegradable alternative to D5 silicone oils.

PARAFOL single cut paraffin are an excellent choice when looking for a phase change material for latent heat storage applications including functional textiles and construction. PARAFOL single cut paraffin are an alternative choice when looking for non-polar solvents, oils or wax additives based on renewable resources for environmentally friendly formulation concepts.

A clear liquid polymer soluble in water, LIPOXOL 300 MED is produced by the addition of ethylene oxide to ethylene glycol. For documents specific to a region, please contact Sasol using the 'Request Document' button.

ISOFOL 24 is a primary, saturated alcohol with defined branching of the carbon chain. Such alcohols are chemically described as 2-alkyl-1-alkanols and are also referred to as Guerbet alcohols. It is a high-purity alcohol that offers excellent oxidative and color stability. Additionally, the twin, 100% linear alkyl branches of the ISOFOL alcohol give it a lower viscosity than dimer alcohols derived from oxo-alcohols. The unique chemical structure of ISOFOL alcohol also provides good solubility and solvency.

BHT is a hindered phenolic antioxidant/preservative that is used widely in Plastics, Elastomers, Lubricants, Oils and Food applications. BHT can be stored, transferred, processed and disposed of safely when proper procedures and safeguards are employed in industrial use. For documents specific to a region, please contact Sasol using the 'Request Document' button.

PARAFOL single cut paraffin are an excellent choice when looking for a phase change material for latent heat storage applications including functional textiles and construction. PARAFOL single cut paraffin are an alternative choice when looking for non-polar solvents, oils or wax additives based on renewable resources for environmentally friendly formulation concepts.

DISPAL 28AC2 is a modified boehmite alumina designed specifically for coatings and polymer applications. The key property enhancements in coatings formulations are corrosion inhibition and adhesion promotion. DISPAL 28AC2 is amenable to water and solvent-based paint applications and can be mixed directly into your formulation providing enhanced performance with ease.

SASOLWAX 6530SA is a qualified hydrocarbon wax yielding similar torque fusion response as fully refined 165F melt paraffin with benefit of reduced die drool (beard), faster heat transfer, slightly stiffer melt and higher output.

ISOCARB 12 is a primary, saturated carboxylic acid with defined branching of the carbon chain. For documents specific to a region, please contact Sasol using the 'Request Document' button.

MARLIPAL O13/109 is based on a primary, multibranched C13 alcohol with approx. 10 moles ethylene oxide. The product contains approx. 10% water to obtain a clear product. It is used in personal care as water-soluble emulsifier. It is applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

PARAFOL 14 RSPO-MB is a high pure paraffin produced from oleochemical resourced under RSPO-MB requirements. It is a clear, colorless liquid. PARAFOL 14 RSPO-MB is a very light and highly spreading emoillient and a readily biodegradable alternative to D5 silicone oils.

MARLIPAL 10/8 is a linear C10 alcohol based ethoxylate with approx. 8 moles ethylene oxide. For documents specific to a region, please contact Sasol using the 'Request Document' button.

LIAL 123 is primary linear and mono-branched alcohols mixture with alkyl chain length of 12 to 13 carbon atoms. For documents specific to a region, please contact Sasol using the 'Request Document' button.

MARLIPAL O13/40 is based on a primary, multibranched C13 alcohol with approx. 4 moles ethylene oxide. It is used in personal care as emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Marlipal O 13/100 is a oxoalcohol C 13 + 10 mol of ethylene oxide. It is used in personal care as water-soluble emulsifier. It is applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

MARLIPAL 24/20 is based on a primary linear C12-C14 fatty alcohol with approx. 2 moles ethylene oxide. The alcohol is obtained from oleo oils, e.g. Palm kernel oil, by transesterification and hydrogenation reaction. MARLIPAL 24/20 is also available as RSPO-MB grade. For documents specific to a region, please contact Sasol using the 'Request Document' button.

MARLINAT 242/28 is an Alkyl Ether Sulfate belonging to Sasol's Sulfates range of products For documents specific to a region, please contact Sasol using the 'Request Document' button.

PARAFOL single cut paraffin are an excellent choice when looking for a phase change material for latent heat storage applications including functional textiles and construction. PARAFOL single cut paraffin are an alternative choice when looking for non-polar solvents, oils or wax additives based on renewable resources for environmentally friendly formulation concepts.

EMULDAC AS-25 is widely used as dispersing agent in industrial applications, in particular in polyester dyeing processes and emulsion polymerizations. EMULDAC AS-25 is suitable for detergent applications in automatic dishwashing tablets and toilet rim blocks. EMULDAC AS-25 is also suitable for personal care applications as O/W emulsifier in a broad range of pH and as dispersant for hair-dyeing formulations. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Galenol 1618 AE is a Special Compound belonging to Sasol's Other Nonionics and Blends range of products. GALENOL 1618 AE is a biodegradable, multipurpose emulsifying alcohol derived from vegetable cetearyl alcohol. This non-ionic self-emulsifying O/W base provides emulsifying and stabilizing properties to lotions, creams, hair colorant creams, developer emulsions, hair relaxers, hair conditioners and depilatory creams, stable over a wide pH range and in the presence of high electrolyte levels. For documents specific to a region, please contact Sasol using the 'Request Document' button.

MARLOSOL TA 50 is an Isotridecanol Ethoxylate belonging to Sasol's Alcohol Ethoxylates range of products. It is used in personal care as emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

DISPAL T25N4-80 is a highly dispersible boehmite alumina made specifically for dispersing directly into water-based to make transparent solutions. These boehmites, which are nano-sized in the dispersed phase, exhibit a unique combination of purity, consistency and dispersibility that make them excellent materials for use in colloidal applications.

MULTISO 13/90 is an Isotridecanol Ethoxylate belonging to Sasol's Alcohol Ethoxylates range of products. It is used in personal care as water-soluble emulsifier. It is applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

MARLIPAL 24/100 is based on a primary linear C12-C14 fatty alcohol with approx. 10 moles ethylene oxide. The alcohol is obtained from oleo oils, e.g. Palm kernel oil, by transesterification and hydrogenation reaction. MARLIPAL 24/100 is also available as RSPO-MB grade For documents specific to a region, please contact Sasol using the 'Request Document' button.

MARLIPAL O13/89 is based on a primary, multibranched C13 alcohol with approx. 8 moles ethylene oxide. The product contains 10% water to obtain a clear product. It is used in personal care as water-soluble emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

MARLOSOL TA 80 is an Isotridecanol Ethoxylate belonging to Sasol's Alcohol Ethoxylates range of products. It is used in personal care as water-soluble emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Butyl glycol ether of 99% mass purity, Used widely in the surface coating industry as a solvent. BGE reduces the viscosity in alky resin varnishes and acts as a property regulator, coalescer and flow improver in water-based paints. Other applications include printing inks, cleansers and mineral oil emulsions, where BGE is used as a solubiliser. BGE has outstanding solvent power for many natural and synthetic resins as well as cellulose derivatives. For documents specific to a region, please contact Sasol using the 'Request Document' button.

MARLIPAL 1618/11 is a fatty alcohol polyethylene glycol ether that acts as an emulsifier that improves consistency by reducing the surface tension of the substances to be emulsified. This alcohol ethoxylate appears as a solid and can be used in skin care products, moisturizers, hair conditioners, suntan and indoor tanning products and hair dyes, colors, and tints. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Monoisopropanolamine (MIPA) with a purity of 99% is an Monoisopryl Amine belonging to Sasol's Alkanol Amines range of products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

MULTISO 13/60 is an Isotridecanol Ethoxylate belonging to Sasol's Alcohol Ethoxylates range of products. It is used in personal care as emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

ALFOL 18 Alcohol is high purity, petrochemical-based 1-octadecanol. ALFOL 18 Alcohol is a white solid with a slight sweet odor. ALFOL 18 Alcohol is classified as readily biodegradable in standard ready biodegradability tests. ALFOL 18 Alcohol can be esterified, ethoxylated, propoxylated, sulfated, oxidized, etc. ALFOL 18 Alcohol are physically and chemically equivalent to corresponding oleochemical-based Alcohols derived from such sources as coconut oil or palm oil. For documents specific to a region, please contact Sasol using the 'Request Document' button.

MARLIPAL 24/99 is based on a primary linear C12-C14 fatty alcohol with approx. 9 moles ethylene oxide. The alcohol is obtained from oleo oils, e.g. Palm kernel oil, by transesterification and hydrogenation reaction. The product contains 10% water to obtain a clear low viscous product For documents specific to a region, please contact Sasol using the 'Request Document' button.

MARLIPAL 24/50 is based on a primary linear C12-C14 fatty alcohol with approx. 5 moles ethylene oxide. The alcohol is obtained from oleo oils, e.g. Palm kernel oil, by transesterification and hydrogenation reaction. MARLIPAL 24/50 is also available as RSPO-MB grade For documents specific to a region, please contact Sasol using the 'Request Document' button.

SAFOL 23E9 Ethoxylate is a biodegradable nonionic derived from SAFOL 23 Alcohol and is ethoxylated to an average of nine moles of ethylene oxide. SAFOL 23E9 Ethoxylate is semi-solid to solid at room temperature and essentially 100% active. The narrow range version of this ethoxylate, made using Sasol Chemicals' patented NOVEL catalyst technology, is also available.

MARLIPAL 24/70 is based on a primary linear C12-C14 fatty alcohol with approx. 7 moles ethylene oxide. The alcohol is obtained from oleo oils, e.g. Palm kernel oil, by transesterification and hydrogenation reaction. MARLIPAL 24/79 is also available as RSPO-MB grade For documents specific to a region, please contact Sasol using the 'Request Document' button.

Depending of the molecular weight the LIPOXOL MED grades are liquid or solid polymers soluble in water. They are produced by the addition of ethylene oxide to ethylene glycol. For documents specific to a region, please contact Sasol using the 'Request Document' button.