Products

ISOFOL 28 is a primary, saturated alcohol with defined branching of the carbon chain. Such alcohols are chemically described as 2-alkyl-1-alkanols and are also referred to as Guerbet alcohols. It is a high purity alcohol that offers excellent oxidative and color stability. Additionally, the twin, 100% linear alkyl branches of the ISOFOL alcohol give it a lower viscosity and better biodegradability than dimer alcohols derived from oxo-alcohols. The unique chemical structure of ISOFOL alcohol also provides good solubility and solvency.

PARAFOL single cut paraffin are an excellent choice when looking for a phase change material for latent heat storage applications including functional textiles and construction. PARAFOL single cut paraffin are an alternative choice when looking for non-polar solvents, oils or wax additives based on renewable resources for environmentally friendly formulation concepts.

A clear liquid polymer soluble in water, LIPOXOL 300 MED is produced by the addition of ethylene oxide to ethylene glycol. For documents specific to a region, please contact Sasol using the 'Request Document' button.

ISOFOL 24 is a primary, saturated alcohol with defined branching of the carbon chain. Such alcohols are chemically described as 2-alkyl-1-alkanols and are also referred to as Guerbet alcohols. It is a high-purity alcohol that offers excellent oxidative and color stability. Additionally, the twin, 100% linear alkyl branches of the ISOFOL alcohol give it a lower viscosity than dimer alcohols derived from oxo-alcohols. The unique chemical structure of ISOFOL alcohol also provides good solubility and solvency.

SASOLWAX Spray 105-G EF is extra fine micronized FT Hardwax no softening in thin film solvent-based formulations, flexographic and paste inks and can coatings.

BHT is a hindered phenolic antioxidant/preservative that is used widely in Plastics, Elastomers, Lubricants, Oils and Food applications. BHT can be stored, transferred, processed and disposed of safely when proper procedures and safeguards are employed in industrial use. For documents specific to a region, please contact Sasol using the 'Request Document' button.

DISPERAL HP 14 is a high-purity, acid dispersible boehmite. It exhibits a unique combination of purity, consistency, and dispersibility that makes it an excellent material for use in colloidal applications. The Sasol range of dispersible boehmites has traditionally been used in application such as sol-gel ceramics, catalysis, refractory materials, rheology control, and surface frictionizing.

ISOFOL 16 is a primary, saturated alcohol with defined branching of the carbon chain. Such alcohols are chemically described as 2-alkyl-1-alkanols and are also referred to as Guerbet alcohols. It is a high purity alcohol that offers excellent oxidative and color stability. Additionally, the twin, 100% linear alkyl branches of the ISOFOL alcohol give it a lower viscosity and better biodegradability than dimer alcohols derived from oxo-alcohols. The unique chemical structure of ISOFOL alcohol also provides good solubility and solvency.

DISPAL 28AC2 is a modified boehmite alumina designed specifically for coatings and polymer applications. The key property enhancements in coatings formulations are corrosion inhibition and adhesion promotion. DISPAL 28AC2 is amenable to water and solvent-based paint applications and can be mixed directly into your formulation providing enhanced performance with ease.

ISOFOL 32 is a primary, saturated alcohol with defined branching of the carbon chain. Such alcohols are chemically described as 2-alkyl-1-alkanols and are also referred to as Guerbet alcohols. It is a high purity alcohol that offers excellent oxidative and color stability. Additionally, the twin, 100% linear alkyl branches of the ISOFOL alcohol give it a lower viscosity and better biodegradability than dimer alcohols derived from oxo-alcohols. The unique chemical structure of ISOFOL alcohol also provides good solubility and solvency.

ALFOL 1618 Alcohol is a high purity, petrochemical-based mixture of cetyl Alcohol and stearyl Alcohol. ALFOL 1618 Alcohol is white in appearance with a sweet pungent odor. ALFOL 1618 Alcohol is classified as readily biodegradable in standard ready biodegradability tests. ALFOL 1618 Alcohol are physically and chemically equivalent to corresponding oleochemical-based Alcohols derived from such sources as coconut oil or palm oil. It can be used as is in personal care formulations or as feedstock for various chemical reactions. For documents specific to a region, please contact Sasol using the 'Request Document' button.

ISOCARB 12 is a primary, saturated carboxylic acid with defined branching of the carbon chain. For documents specific to a region, please contact Sasol using the 'Request Document' button.

MARLIPAL O13/109 is based on a primary, multibranched C13 alcohol with approx. 10 moles ethylene oxide. The product contains approx. 10% water to obtain a clear product. It is used in personal care as water-soluble emulsifier. It is applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

LIAL 123 is primary linear and mono-branched alcohols mixture with alkyl chain length of 12 to 13 carbon atoms. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Marlipal O 13/100 is a oxoalcohol C 13 + 10 mol of ethylene oxide. It is used in personal care as water-soluble emulsifier. It is applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

MARLIPAL O13/40 is based on a primary, multibranched C13 alcohol with approx. 4 moles ethylene oxide. It is used in personal care as emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

MARLIPAL 24/20 is based on a primary linear C12-C14 fatty alcohol with approx. 2 moles ethylene oxide. The alcohol is obtained from oleo oils, e.g. Palm kernel oil, by transesterification and hydrogenation reaction. MARLIPAL 24/20 is also available as RSPO-MB grade. For documents specific to a region, please contact Sasol using the 'Request Document' button.

ISALCHEM 145 is primary mono-branched alcohols mixture with alkyl chain length of 14 to 15 carbon atoms. For documents specific to a region, please contact Sasol using the 'Request Document' button.

LIAL 125 is primary linear and mono-branched alcohols mixture with alkyl chain length of 12 to 15 carbon atoms. For documents specific to a region, please contact Sasol using the 'Request Document' button.

EMULDAC AS-80 is a fatty alcohol polyethyleneglycol ether, based on NAFOL 1618S and ethylene oxide (about 80 moles). For documents specific to a region, please contact Sasol using the 'Request Document' button.

MARLOSOL TA 50 is an Isotridecanol Ethoxylate belonging to Sasol's Alcohol Ethoxylates range of products. It is used in personal care as emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

DISPERAL P2W is a high-purity, water dispersible boehmite. It exhibits a unique combination of purity, consistency, and dispersibility that makes it an excellent material for use in colloidal applications. The Sasol range of dispersible boehmites has traditionally been used in application such as sol-gel ceramics, catalysis, refractory materials, rheology control, and surface frictionizing.

DISPAL T25N4-80 is a highly dispersible boehmite alumina made specifically for dispersing directly into water-based to make transparent solutions. These boehmites, which are nano-sized in the dispersed phase, exhibit a unique combination of purity, consistency and dispersibility that make them excellent materials for use in colloidal applications.

MARLIPAL O13/89 is based on a primary, multibranched C13 alcohol with approx. 8 moles ethylene oxide. The product contains 10% water to obtain a clear product. It is used in personal care as water-soluble emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

MULTISO 13/90 is an Isotridecanol Ethoxylate belonging to Sasol's Alcohol Ethoxylates range of products. It is used in personal care as water-soluble emulsifier. It is applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

LIALET 111-7 is a fatty alcohol polyethyleneglycol ether, based on LIAL 111 and ethylene oxide (about 7 moles). It is used in personal care as water-soluble emulsifier, applicable for all kinds of personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

MARLOSOL TA 80 is an Isotridecanol Ethoxylate belonging to Sasol's Alcohol Ethoxylates range of products. It is used in personal care as water-soluble emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

DISPERAL 60 is a high-purity, acid dispersible boehmite. It exhibits a unique combination of purity, consistency, and dispersibility that makes it an excellent material for use in colloidal applications. The Sasol range of dispersible boehmites has traditionally been used in application such as sol-gel ceramics, catalysis, refractory materials, rheology control, and surface frictionizing.

MULTISO 13/60 is an Isotridecanol Ethoxylate belonging to Sasol's Alcohol Ethoxylates range of products. It is used in personal care as emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

SAFOL 23E7 Ethoxylate is a biodegradable nonionic derived from SAFOL 23 Alcohol and is ethoxylated to an average of seven moles of ethylene oxide. SAFOL 23E7 Ethoxylate is liquid at room temperature and essentially 100% active. The narrow range version of this ethoxylate, made using Sasol Chemicals' patented NOVEL catalyst technology, is also available.

MARLIPAL 24/99 is based on a primary linear C12-C14 fatty alcohol with approx. 9 moles ethylene oxide. The alcohol is obtained from oleo oils, e.g. Palm kernel oil, by transesterification and hydrogenation reaction. The product contains 10% water to obtain a clear low viscous product For documents specific to a region, please contact Sasol using the 'Request Document' button.

Depending of the molecular weight the LIPOXOL MED grades are liquid or solid polymers soluble in water. They are produced by the addition of ethylene oxide to ethylene glycol. For documents specific to a region, please contact Sasol using the 'Request Document' button.

SAFOL 23E9 Ethoxylate is a biodegradable nonionic derived from SAFOL 23 Alcohol and is ethoxylated to an average of nine moles of ethylene oxide. SAFOL 23E9 Ethoxylate is semi-solid to solid at room temperature and essentially 100% active. The narrow range version of this ethoxylate, made using Sasol Chemicals' patented NOVEL catalyst technology, is also available.

MARLIPAL 24/60 is based on a primary linear C12-C14 fatty alcohol with approx. 6 moles ethylene oxide. The alcohol is obtained from oleo oils, e.g. Palm kernel oil, by transesterification and hydrogenation reaction. MARLIPAL 24/60 is also available as RSPO-MB grade." For documents specific to a region, please contact Sasol using the 'Request Document' button.

MARLIPAL 24/30 is based on a primary linear C12-C14 fatty alcohol with approx. 3 moles ethylene oxide. The alcohol is obtained from oleo oils, e.g. Palm kernel oil, by transesterification and hydrogenation reaction. MARLIPAL 24/30 is also available as RSPO-MB grade For documents specific to a region, please contact Sasol using the 'Request Document' button.

DISPERAL 40 is a high-purity, acid dispersible boehmite. It exhibits a unique combination of purity, consistency, and dispersibility that makes it an excellent material for use in colloidal applications. The Sasol range of dispersible boehmites has traditionally been used in application such as sol-gel ceramics, catalysis, refractory materials, rheology control, and surface frictionizing.