Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
Features & Benefits
- CASE Ingredients Features
- Product Characteristics
* High melting and softening point
* Low viscosity
* Excellent heat resistance and thermal stability
* High hardness level
* Excellent chemical resistance
* Excellent compatibility with other waxes
* Excellent lubrication
Applications & Uses
- Markets
- Applications
- Compatible Polymers & Resins
- Adhesive & Sealant Type
- Typical Application
* Hot melt adhesive
* PVC compound
* Color masterbatch
* Thermoplastic road marking
* Plastic additive
* Petroleum wax blend
* Rubber
* Cable filling compound
* Candle- Processing Guidelines
The recommended melt temperature is 130 - 150 °C. It is recommended to use mixing machine giving good
homogenization. The recommend dosage depends on the intended applications which are shown below:Applications Recommendation
Hot melt adhesive 20 - 30% is recommended to reduce viscosity and adjust setting time of polyolefins,EVA base.
PVC compound 0.5 - 1.5 phr is recommended to be external lubricant for rigid PVC.
Color masterbatch 5 - 30% is recommended to improve pigment dispersion in polyolefins bases.
Thermoplastic road 1-3% is recommended to reduce viscosity for hydrocarbon resin base. marking
Plastic additive 5 - 8% is recommended to improve filler dispersion in polyolefins bases.
Petroleum wax blend 3 - 5% is recommended to add into a paraffin wax to increase softening point and hardness.
Rubber 2 - 10% is recommended to improve processability and additives dispersion.
Cable filling compound 5-10 phr is recommended to improve moisture barrier property.
Candle 1-5% is recommended to improve gloss, hardness and prolong candle life.
Product Technical Assistance
For technical assistance or further information on this product or any other SCG Chemicals' products contact your
SCG Chemicals technical service at the address or telephone number as specified below.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Viscosity at 149°C | 20-40 | cps | ASTM 03236 |
| Density | 0.94 | g/cm3 | ASTM D1505 |
| Penetration Hardness | 2 | dmm | ASTM D1321 |
| Dropping Point | 116 | °C | ASTM D3954 |
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
- International Compliance
* US FDA 21 CFR 175.105
* US FDA 21 CFR 178.3720
* Directive 2002/95/EC (RoHS) and
Directive 2011/65/EU (ROHS Recast)
* Regulation (EC) No.1907/2006 (REACH)
* Directive 94/62/EC (Packaging and Packaging Waste)
Safety & Health
- Safety
* The product is not classified as a hazardous material.
* Please see our Material Safety Data Sheet for details on various aspects of safety, recovery, and disposal of the products; for more information, contact your SCG Plastics/SCG Performance Chemicals technical service.
Packaging & Availability
- Packaging Type
- Product Packaging
* 20 kg loose bag
* 20 kg bag on pallet (pelletized wrap)
- Recycling
* The product is suitable for recycling using modern methods of shredding and cleaning. In-house production waste should be kept clean to facilitate direct recycling.
* Please see our Material Safety Datasheet for details on various aspects of safety, recovery and disposal of the products; for more information, contact your SCG Plastics/SCG Performance Chemicals technical service.
Storage & Handling
- Storage
* Store in original container in tidy according to the manual of Handling and Storage from Thai PolyethyleneCompany Limited/ Thai Polypropylene Company Limited.
* Product(s) should be stored in dry and dust free location at temperature below 50°C and protected from direct sunlight and/or heat, well-ventilated area, away from incompatible materials and food and drink, as this may lead to quality deterioration, which results in odor generation and color changes and can have negative effects on the physical properties of this product.* Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination.
* The storage area should be stable and not be slopped.