Products

Texicryl® 13-602 is a styrene acrylic copolymer emulsion designed for use in flexible fillers, caulks, sealant applications and architectural coatings. It enhances the workability and technical performance of many products. It meets all environmental demands, such as low VOC, APEO-free and formaldehyde-free with no compromise on quality and performance.

Texicryl® 13-812 is an alkali swellable emulsion designed for water-based printing ink formulations. It has excellent rub resistance and transfer properties. It is designed for use in flexographic inks for corrugated board. It is also suitable as a pigment grinding medium and let down vehicle.

Texicryl® 13-308 is an alkali soluble emulsion designed as a thickener for water-based formulations. It can be used in the formulation of ceramic tile adhesives, paints, waterborne coating systems and for use in EN 12004-1and2: 2017 D1 CTAs, a wide range of building adhesives and highly filled coatings.

Texicryl® 13-217 is an APEO free self-crosslinking acrylic copolymer emulsion characterised by a soft film giving, after crosslinking, a high resistance to washing and to primed or printed fabrics. It is ideal for the manufacturing of non woven fabrics and as flocking adhesive by spraying, in full bath or by foaming.

Texicryl® 13-809 is a styrene acrylic emulsion polymer designed for high gloss, water-based overprint varnishes and heat resistant inks. This styrene acrylic binder has been designed to provide superb clarity, water resistance, heat resistance, gloss etc. It can be used as deblocking modifier.

Texicryl® 13-313 is an alkali swellable thickener designed for water-based formulations. It is highly effective in modifying viscosities at low shear rates to avoid both settling and sagging. It has been designed for use in the formulation of textured coatings, woodstains, paints and waterborne coating systems.

Texicryl® 13-074 is an APEO free styrene acrylic copolymer emulsion which has been developed for use in mixes containing portland cement for flooring applications. It imparts a higher degree of flexibility and also acts as a soft binder used in fabric glue formulations for tissues and papers.

Texicryl® 13-824 is a styrene acrylic copolymer emulsion that can be coalesced to form a solvent and plasticiser resistant film. This hard non-film forming emulsion shows excellent adhesion to vinyl and non-absorbent susbstrates. It has been developed for the formulation of plasticiser resistant inks and is suitable for PVC flooring and wallpaper inks.

Texicryl® 13-814 is a styrene acrylic copolymer aqueous dispersion with excellent flexibility and adhesion properties. It is suitable for use as the main binder in flexo or gravure inks and has good clarity so is suitable for offset overprint. This acrylic dispersion will also be suitable to compound into barrier coatings, as it exhibits very low MVTR and Cobb values.

Texicryl® 13-070 is a styrene acrylic copolymer emulsion designed primarily as a binder for D1 ceramic tile adhesives. It has been designed to be formulated, with a wide range of filler types, into D1 tile adhesives. It acts as a binder for use in EN 12004-1and2: 2017 D1 CTAs, economic exterior and interior coatings, fence stains and flat paints.

Texicryl® 13-023 is an aqueous dispersion of a modified styrene acrylic copolymer, used in the manufacture of high performance ceramic tile adhesives. Due to the nature of its special emulsifier system, it is possible to use Texicryl® 13-023 with various fillers (silicas, calcium carbonate, microdol etc). It functions as a high performance water resistant binder for EN 12004-1 and 2: 2017 D2 CTAs and fix grouts.

Texicryl® 13-819 is a styrene acrylate based vehicle designed for high gloss heat resistant overprint varnishes. It has been designed for use in hard polymers normally used in the formulating of overprint varnishes, and it can be blended into OPV’s to partially replace the hard polymer and enhance the gloss level. The product is free from APEO based surfactants.

Texicryl® 13-828 is a highly efficient alkali swellable emulsion designed for water-based printing ink formulations. The product has been designed for use in flexographic inks for corrugated board. It is also suitable as a pigment grinding medium and let down vehicle.

Crestomer® Advantage 60 Structural Adhesive bonds a wide range of substrates with minimal surface preparation and a lower odor when compared to competitive materials. It is white in color and has a gel time of 60 minutes, with a workable time of 3 hours for bonded parts. This product is based on Scott Bader's innovative urethane acrylate technology and exhibits exceptional impact strength and toughness. Its excellent adhesion and gap-filling capabilities offer great flexibility in design with significant time and cost savings.

Crestomer® Advantage 30 Structural Adhesive is a white, high-performance structural adhesive offering the same advantages as Crestomer® 1151A but in a more convenient, pre-packed 380ml co-axial cartridge. It is particularly suitable for marine applications and has Lloyd's approval. The opaque white color of the adhesive blends well aesthetically with cosmetically sensitive applications.

Texicryl® 13-078 is a styrene acrylic copolymer emulsion, designed primarily as a binder for high performance ceramic tile adhesives. It has been designed to be formulated with a wide range of filler types into water resistant tile adhesives and grouts.

Crestomer® 1186PA Structural Adhesive is a multi-purpose structural adhesive with exceptional adhesion to a wide range of metals, ceramics, and polymeric materials. In addition, it exhibits superior properties for impact resistance and resistance to crack propagation when compared to polyester bonding pastes. This product is pre-accelerated and maintains a high-strength structural bond even when used as a gap filler with non-slumping and low-odor properties. It has been certified by Lloyds.

Texicryl® 13-066 is a styrene acrylic copolymer emulsion, designed primarily for the production of flexible, water-resistant ceramic tile adhesives and is especially suitable for floor tile adhesive. It can be compounded into adhesives with a high degree of flexibility for use with wall and floor ceramic tiles.

Crestomer® 1152PA Structural Adhesive provides high performance and is designed for demanding applications. It creates tough bonds with greater movement and allows for significant time, cost, and weight savings. This product has reduced styrene emissions, and it greatly improves cosmetics. It can be used to bond many substrates and has certified approvals from Lloyds, DNV, and RINA.

Texicryl® 13-813 is a modified styrene acrylic copolymer designed for use in off-set overprinting varnishes. It has been formulated to give excellent gloss over print and superior holdout over unprinted areas. It may also be used for certain graphic arts applications to non-absorbent substrates.

Crestomer® Advantage 10 Structural Adhesive bonds a wide range of substrates with minimal surface preparation and a lower odor when compared to competitive materials. It is white in color and has a fast gel time of 10 minutes, with a workable time of 70 minutes for bonded parts. This product is based on Scott Bader's innovative urethane acrylate technology and exhibits exceptional impact strength and toughness. Its excellent adhesion and gap-filling capabilities offer great flexibility in design with significant time and cost savings.

Texicryl® 13-665 is designed for use in a broad range of formulations where low VOC is required. It has been specifically designed MIT free to meet the new regulatory requirements for artist’s color paints. It meets all environmental demands, such as low VOC, APEO-free and formaldehyde-free with no compromise on quality and performance.

Crestomer® 1150PA is a two-part, pre-accelerated, highly thixotropic structural adhesive that is based on unsaturated urethane-acrylate in styrene monomer. It is used in many structural composite applications and has excellent adhesion to FRP laminates, core materials, wood, and some metals. This product can be used for bonding diesel tanks, contour joints in FRP components, building up damaged areas, and bonding "green" FRP.

Crestomer® 1196PA Structural Adhesive is a low-density, high-performance structural core adhesive with good gap-filling properties. This product is based on Scott Bader's innovative urethane acrylate technology and is used in sandwich construction where strong, tough, highly impact-resistant structures are required. Compared to other core bonding methods, this product has reduced print through, reduced weight, and outstanding adhesion. It has Lloyds' approval and can be used to bond many substrates. This product has been formulated to bond core materials such as rigid PVC foam and balsa to cured or semi-cured FRP skins. Using Crestomer® 1196PA gives a significantly tougher and more durable structural bond than a polyester resin/glass structure or polyester bonding adhesive. In addition, it provides significant weight savings, reduced styrene emissions, and greatly improved cosmetics with the elimination of core print-through.

Crestakyd® 10-3000 is an air drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. It is used for interior and exterior decorative enamels, marine and topside paints. Also suitable for undercoats, maintenance primers and floor varnishes.

Texicryl® 13-619 is a styrene acrylic copolymer emulsion designed for formulation of co-solvent free construction adhesives. It can be used in the formulation of high performance water resistant tile adhesives, fix and grouts and general purpose fillers. It meets all environmental demands, such as low VOC, APEO-free and formaldehyde-free with no compromise on quality and performance.

Texicryl® 13-607 is a pure acrylic copolymer emulsion designed for use in a broad range of formulations requiring low VOC, low water uptake and excellent water whitening resistance. It is designed for use in artist’s color formulations as well as for low VOC interior and exterior coating systems. It also shows good water blanching resistance.

Texicryl® 4025 is an alkali swellable emulsion designed for waterbased printing ink formulations. This emulsion is cross-linkable with thermoset resins, compatable with solvents and other resin systems. It is suitable for inks used on absorbent substrates such as packaging materials and wallpapers. It can also be used in bottle labeling adhesives.

Texicryl® 13-224 is a self crosslinking styrene acrylic copolymer emulsion with soft handle and good wet scrub resistance properties. It gives excellent binding properties for pigment printing of textiles. It maybe used on both rotary as well as flat frameworks.

Crestafix® 621CC 85 Bonding Paste is a pre-accelerated urethane acrylate/ isophthalic polyester high performance bonding paste. It is a non-sagging, filled compound, specifically designed for the assembly and bonding of GRP moldings. This highliy thixotropic polyester can also be used on timber and plasterboard.

Crestafix® 90-78PA Polyester Bonding Paste is a fast-curing, pre-accelerated, orthophthalic polyester bonding paste. It exhibits exceptional handling properties, especially on GRP and wood substrates. This product has been specifically designed for the assembly and bonding of GRP moldings such as panels, inserts, internal frames, ribs, and any other non-structural bonding applications. It is non-sagging and does not require resin additions.

Texicryl® 13-219 is a self-crosslinking styrene acrylic copolymer emulsion for use as a binder in the manufacture of spray-bonded synthetic fiber waddings. This product is also ideal as a stiffener for window blinds. It has been developed for use in surface bonding and through-bonding of synthetic fiber wadding.

Crestafix® 90-84PA Polyester Bonding Paste is a lightweight, low-exotherm, pre-accelerated orthophthalic polyester bonding paste. It is a non-sagging compound, designed for non-structural applications where gap-filling may be a secondary requirement. This product has been specifically designed to provide weight-saving properties and ease of application.

Texicryl® 13-319 is a hydrophobically modified alkali swellable emulsion designed for use as a rheology modifier in waterbased formulations. It is highly effective in modifying viscosities at low shear rates to avoid both settling and sagging. It has been designed for use in the formulation of textured coatings, woodstains, paints and waterborne coating systems.

Crestafix® B72R Bonding Paste is a polyester-based, MEKP catalysed core bedding compound, developed for both hand-layup and vacuum-bag core installation. It is used as a 2-part system in conjunction with a priming resin applied to the core surface. Lightweight and non-sagging, Crestafix® B72R is formulated to the degree of elasticity required for the core to skin interface.

Crestafix® 630PA is a pre-accelerated vinyl ester-based high-performance bonding paste. This product is a non-sagging, filled compound with high strength, specifically designed for the assembly and bonding of GRP moldings. Its applications include panels, inserts, internal frames, ribs, internal core materials, and composite constructions. This product provides high shear strength bonded joints without the need for mechanical fixings.