Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Sustainability
Products
Cosmetic Ingredients
Food Ingredients
Knowde for Suppliers
Browse
Sample
Chat
Request
Search
Products
Scott Bader
All Scott Bader
Search products
Matching Product Categories
CASE Ingredients
Industrial Additives & Materials
Ready-to-Use Products
Composite Materials
Cosmetic Ingredients
Markets
Labeling Claims
Physical Form
Regional Availability
All Filters
73 Products found on Scott Bader
Most Viewed
TDS
With TDS
Texipol 63-513
Product Families:
Rheology Modifiers & Stabilizers, Additives
Chemical Family:
Acrylics & Acrylates
End Uses:
Waterborne Adhesive, Waterborne Coating
Texipol 63-513 is a next generation inverse emulsion synthetic thickener based on a significant proportion of bio-derived content. It imparts pseudoplastic rheology to aqueous compositions and is supplied as a pre-neutralized dispersion, as the sodium salt of an acrylic based polymer. Texipol 63-513 shows broad pH compatibility.
Texicryl® 13-602
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
Compatible Substrates & Surfaces:
Wood
Glass Transition Temperature (Tg):
30.0 - 30.0 °C
Texicryl® 13-602 is a styrene acrylic copolymer emulsion designed for use in flexible fillers, caulks, sealant applications and architectural coatings. It enhances the workability and technical performance of many products. It meets all environmental demands, such as low VOC, APEO-free and formaldehyde-free with no compromise on quality and performance.
Texicryl® 13-812
Applications:
Bookbinding, Bookbinding Adhesives, Flexography
Product Families:
Acrylics, Functional Additives, Additives
Chemical Family:
Acrylics & Acrylates
End Uses:
Flexography Ink
Texicryl® 13-812 is an alkali swellable emulsion designed for water-based printing ink formulations. It has excellent rub resistance and transfer properties. It is designed for use in flexographic inks for corrugated board. It is also suitable as a pigment grinding medium and let down vehicle.
Texipol 63-510
Product Families:
Rheology Modifiers & Stabilizers, Additives
Chemical Family:
Acrylics & Acrylates
End Uses:
Waterborne Adhesive, Waterborne Coating
Texipol 63-510 is an inverse emulsion thickener that imparts a highly pseudoplastic rheology to aqueous based compositions. It is supplied as a pre-neutralized dispersion, as the sodium salt of an acrylic copolymer and shows thickening over a very wide pH range of 2 - 12.
Texicryl® 13-400
Applications:
Textile Manufacturing, Digital Printing, Printing & Inks
Product Families:
Finishing Additives & Treatments, Textile & Leather Chemicals
Chemical Family:
Acrylics & Acrylates
End Uses:
Textiles, Digital Ink
Texicryl® 13-400 is a formaldehyde free, cationic emulsion binder, specially designed for textile applications. It has been specially designed for textile applications using processes like pigment dyeing, mordant and printing. The product benefits are high crock-fastness, washing performance, excellent color yield and soft handle.
Texicryl® 13-318
Applications:
Decorative Paints, Coatings & Stains, Wood Coatings & Finishes, Decorative Paints
Product Families:
Surface Modifiers, Rheology Modifiers & Stabilizers, Additives
Chemical Family:
Alkali Swellable Emulsion (ASE) Thickener, Acrylics & Acrylates
End Uses:
Waterborne Coating
Texicryl® 13-318 is a hydrophobically modified alkali swellable emulsion designed for use as a rheology modifier in waterbased formulations. It is highly effective in modifying viscosities at low shear rates to avoid both settling and sagging. This emulsion can be used in cartidge products and construction adhesives.
Texicryl® 13-503
Chemical Family:
Styrene-Acrylic Copolymer, Acrylics & Acrylates
End Uses:
Waterborne Coating
Compatible Substrates & Surfaces:
Plastics, Polyethylene (PE), Polypropylene (PP)
Glass Transition Temperature (Tg):
-50.0 - -50.0 °C
Features:
High Gloss, Water Resistance, Abrasion Resistance, Reduces Rub-out
Texicryl® 13-503 is a styrene acrylic copolymer emulsion designed for the formulation of printing inks for application to non absorbent, low surface energy substrates. It is used in the formulation of printing inks for substrates such as polyethylene, polypropylene and various foils.
Texicryl® 13-308
Functions:
Thickener, Rheology Modifier, Binder & Resin
Chemical Family:
Acrylics & Acrylates
End Uses:
Waterborne Coating
Physical Form:
Liquid, Dispersion, Emulsion
Texicryl® 13-308 is an alkali soluble emulsion designed as a thickener for water-based formulations. It can be used in the formulation of ceramic tile adhesives, paints, waterborne coating systems and for use in EN 12004-1and2: 2017 D1 CTAs, a wide range of building adhesives and highly filled coatings.
Texicryl® 13-217
Functions:
Binder, Binder & Resin
Chemical Family:
Acrylics & Acrylates
Compatible Substrates & Surfaces:
Textiles
Features:
Good Film Former, Self Crosslinking, Excellent Water Wash Capabilities
Texicryl® 13-217 is an APEO free self-crosslinking acrylic copolymer emulsion characterised by a soft film giving, after crosslinking, a high resistance to washing and to primed or printed fabrics. It is ideal for the manufacturing of non woven fabrics and as flocking adhesive by spraying, in full bath or by foaming.
Texicryl® 13-601
Chemical Family:
Acrylics & Acrylates
End Uses:
Top Coat, Waterborne Coating
Glass Transition Temperature (Tg):
8.0 - 8.0 °C
Features:
Less Dirt Pick Up Potential, High Durability
Texicryl® 13-601 is a pure acrylic copolymer emulsion designed for use in both interior and exterior coating applications. It is designed for use in the formulation of solvent free decorative coatings with excellent durability and low dirt pick up. Other applications include artist’s colors and hobby paints.
Texicryl® 13-809
Applications:
Bookbinding, Bookbinding Adhesives, Food & Beverage Packaging
Product Families:
Acrylics, Resins & Binders
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Waterborne Coating, Waterborne Ink, Other Ink Types
Texicryl® 13-809 is a styrene acrylic emulsion polymer designed for high gloss, water-based overprint varnishes and heat resistant inks. This styrene acrylic binder has been designed to provide superb clarity, water resistance, heat resistance, gloss etc. It can be used as deblocking modifier.
Texicryl® 13-313
Applications:
Sealants & Caulks, Construction Adhesives, Wood Coatings & Finishes
Product Families:
Acrylics, Surface Modifiers, Rheology Modifiers & Stabilizers
Chemical Family:
Alkali Swellable Emulsion (ASE) Thickener, Acrylics & Acrylates
End Uses:
Waterborne Coating
Texicryl® 13-313 is an alkali swellable thickener designed for water-based formulations. It is highly effective in modifying viscosities at low shear rates to avoid both settling and sagging. It has been designed for use in the formulation of textured coatings, woodstains, paints and waterborne coating systems.
Texicryl® 13-074
Applications:
Sealants & Caulks, Other Building Materials, Floor Coatings
Product Families:
Acrylics, Finishing Additives & Treatments, Cement & Concrete Additives
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Paper & Pulp, Cement, Building Materials
Texicryl® 13-074 is an APEO free styrene acrylic copolymer emulsion which has been developed for use in mixes containing portland cement for flooring applications. It imparts a higher degree of flexibility and also acts as a soft binder used in fabric glue formulations for tissues and papers.
Texicryl® 13-687
Applications:
Decorative Paints, Coatings & Stains, Architectural Coatings, Decorative Paints
Product Families:
Acrylics, Resins & Binders
Chemical Family:
Acrylics & Acrylates
End Uses:
Waterborne Coating
Texicryl® 13-687 is a high performance water based, adhesion promoted pure acrylic emulsion, which has been specifically developed for use in high performance coatings for interior and exterior applications. This polymer is in line with “green technology” as it is APEO free, max. 0.1% VOC and has a low odor emulsion.
Texicryl® 13-525
Product Families:
Acrylics, Resins & Binders
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Waterborne Ink, Other Ink Types, Varnishes
Texicryl® 13-525 is a APEO free modified styrene acrylic copolymer designed to be the main binder in the formulation of blister seal adhesives with superb graphic qualities. The polymer will suit other heat-seal applications and is also suitable as a modifying agent in natural rubber latex in cold seal applications.
Texicryl® 13-073
Applications:
Shingles & Tiles, Decorative Paints, Coatings & Stains, Construction Adhesives
Product Families:
Acrylics, Resins & Binders
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Tile Adhesive, Primer
Texicryl® 13-073 is a styrene acrylic copolymer emulsion, designed primarily for the production of flexible, water-resistant ceramic tile adhesives. This emulsion is especially suitable for floor tile adhesives and also used in the formulation of primer systems. It controls the porosity and aids adhesion to the base substrates.
Texicryl® 13-824
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
Glass Transition Temperature (Tg):
66.0 - 66.0 °C
Features:
Excellent Adhesion
Texicryl® 13-824 is a styrene acrylic copolymer emulsion that can be coalesced to form a solvent and plasticiser resistant film. This hard non-film forming emulsion shows excellent adhesion to vinyl and non-absorbent susbstrates. It has been developed for the formulation of plasticiser resistant inks and is suitable for PVC flooring and wallpaper inks.
Texicryl® 13-814
Applications:
Offset & Lithographic Printing, Bookbinding, Bookbinding Adhesives
Product Families:
Acrylics, Resins & Binders
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Offset Ink, Waterborne Coating, Other Ink Types
Texicryl® 13-814 is a styrene acrylic copolymer aqueous dispersion with excellent flexibility and adhesion properties. It is suitable for use as the main binder in flexo or gravure inks and has good clarity so is suitable for offset overprint. This acrylic dispersion will also be suitable to compound into barrier coatings, as it exhibits very low MVTR and Cobb values.
Crestacryl® 71-8026
Applications:
Infrastructure, Roads & Paving, Coatings & Markings, Building & Construction
Product Families:
Acrylics, Resins & Binders
Chemical Family:
Acrylics & Acrylates
End Uses:
Solventborne Coating
Crestacryl® 71-8026 is a thermoplastic acrylic resin with very rapid solvent release and drive-over ability. This resin possesses good quality properties such as excellent hardness, very good elasticity and adhesion. It can be used as a high grade road-marking paint with excellent solvent release.
Texicryl® 13-070
Applications:
Architectural Coatings, Interior Fixtures, Shingles & Tiles
Product Families:
Acrylics, Resins & Binders
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Tile Adhesive, Waterborne Coating
Texicryl® 13-070 is a styrene acrylic copolymer emulsion designed primarily as a binder for D1 ceramic tile adhesives. It has been designed to be formulated, with a wide range of filler types, into D1 tile adhesives. It acts as a binder for use in EN 12004-1and2: 2017 D1 CTAs, economic exterior and interior coatings, fence stains and flat paints.
Crestacryl® 71-9078
Chemical Family:
Acrylics & Acrylates
End Uses:
Solventborne Coating
Compatible Substrates & Surfaces:
Metal, Wood
Features:
Excellent Flow, Good Release Properties, Multi-Substrate Adhesion, High Durability, Water Resistance, Excellent Adhesion, Non-Yellowing Grade, Alkali Resistance, Good Elastic Recovery, Abrasion Resistance
Crestacryl® 71-9078 is a high quality thermoplastic acrylic resin, which gives rapid solvent release, very good elasticity, excellent adhesion on various metallic substrates and very good alkali and water resistance. It can be used as universal binder for metal paints, wood coatings, road marking paints, masonry paints and concrete.
Texicryl® 13-013
Applications:
Waterproofing & Weatherproofing, Primers & Lacquers, Fillers, Levellers & Joints
Product Families:
Acrylics, Resins & Binders
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Lacquers, Primer
Texicryl® 13-013 is a styrene acrylic copolymer emulsion containing a plasticizer. The product gives excellent adhesion on substrates and even at low temperature, the flexibility is good. It is suitable for paints, sealants, acrylics, highly filled putties and soft fillers applications.
Texicryl® TD8449
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
Features:
Excellent Stain Blocking, Stain Resistance
Texicryl® TD8449 is a styrene acrylic binder which exhibits excellent stain blocking properties and gives good results for lipstick, highlighter pen and general marker pen stains. It has shown promising results in a simple formulation for the following: Tannin stain blocking Marker stain blocking
Texicryl® 17-0330
Applications:
Decorative Paints, Coatings & Stains, Decorative Paints, Other Printing Applications
Product Families:
Acrylics, Resins & Binders
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Waterborne Adhesive, Waterborne Coating, Top Coat
Texicryl® 17-0330 is a styrene acrylic copolymer emulsion designed for use in high performance adhesives, inks, and coatings where flexibility and/or cold temperature flexibility are desired. It can be utilized in a range of water based adhesives and emulsion paint formulations and can easily be formulated into coatings varying in properties from semi-gloss finish to high pigment volume concentration low-cost paints.
Texicryl® 13-023
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Tile Adhesive
Compatible Substrates & Surfaces:
Tile, Ceramic
Glass Transition Temperature (Tg):
30.0 - 30.0 °C
Features:
Water Resistance, Excellent Adhesion
Texicryl® 13-023 is an aqueous dispersion of a modified styrene acrylic copolymer, used in the manufacture of high performance ceramic tile adhesives. Due to the nature of its special emulsifier system, it is possible to use Texicryl® 13-023 with various fillers (silicas, calcium carbonate, microdol etc). It functions as a high performance water resistant binder for EN 12004-1 and 2: 2017 D2 CTAs and fix grouts.
Texicryl® 13-620
Applications:
Waterproofing & Weatherproofing, Decorative Paints, Coatings & Stains, Pavement, Highways, Roads & Bridges
Product Families:
Mortar & Gypsum Additives, Cement & Concrete Additives, Acrylics
Chemical Family:
Acrylics & Acrylates
End Uses:
Wall Putty, Cement, Building Materials
Texicryl® 13-620 is an APEO free pure acrylic copolymer emulsion designed for use in the building and construction industry. The polymer offers improved adhesion to various substrates and superior elasticity to relevant mixtures. It is designed for use in flexible mineral sealings, crack-bridging systems, waterproof coatings, fillers, putties, polymer-modified cement and mortar based mixtures of all kinds.
Texicryl® 13-691
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Top Coat, Primer
Compatible Substrates & Surfaces:
Ceramic, Tile
Features:
Excellent Adhesion, Less Dirt Pick Up Potential, Water Resistance
Texicryl® 13-691 is an APEO free styrene acrylic copolymer emulsion designed for use in a variety of coating compounds and in a wide range of water-based paints and waterproofing compounds. Also used as a flexible water resistant binder for use in EN 12004:2001 D2 (class AA) ceramic tile adhesives and ceramic floor tile adhesives.
Texicryl® 13-819
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Waterborne Coating, Varnishes, Other Ink Types
Compatible Substrates & Surfaces:
Plastics
Glass Transition Temperature (Tg):
93.0 - 93.0 °C
Features:
High Gloss, Blocking Resistance, Heat Resistance
Texicryl® 13-819 is a styrene acrylate based vehicle designed for high gloss heat resistant overprint varnishes. It has been designed for use in hard polymers normally used in the formulating of overprint varnishes, and it can be blended into OPV’s to partially replace the hard polymer and enhance the gloss level. The product is free from APEO based surfactants.
Texicryl® 13-682
Applications:
Decorative Paints, Coatings & Stains, Architectural Coatings, Waterproofing & Weatherproofing
Product Families:
Acrylics, Resins & Binders
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Waterborne Coating
Texicryl® 13-682 is the APEO free Styrene Acrylic copolymer emulsion designed for use in high performance roof coating compounds and in a wide range of water-based paints. It is specifically recommended for the formulation of roof mastics and waterproofing compounds. It has exceptional water resistance after drying yet good water vapour transmission. Compounds made with Texicryl® 13-682 stand up to prolonged ponded water conditions.
Texicryl® 13-616
Applications:
Decorative Paints, Coatings & Stains, Decorative Paints, Building Materials
Product Families:
Acrylics, Resins & Binders
Chemical Family:
Acrylics & Acrylates
Texicryl® 13-616 is a self crosslinking acrylic copolymer emulsion designed for use in high performance coatings. It is designed for use in high performance coatings with superior water, chemical and blocking resistance. It meets all environmental demands, such as low VOC, APEO-free and formaldehyde-free with no compromise on quality and performance.
Texicryl® 13-645
Applications:
Decorative Paints, Coatings & Stains, Architectural Coatings, Primers & Lacquers
Product Families:
Acrylics, Resins & Binders
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Primer
Texicryl® 13-645 is a high effiency styrene acrylic binder which exhibits excellent resistance to water blanch. It is a general purpose styrene acrylic binder which exhibits excellent resistance to water blanch. Texicryl® 13-645 has a low surfactant content which helps to minimise rheology modifier use in a compounded system.
Texicryl® 13-220
Functions:
Binder
Chemical Family:
Acrylics & Acrylates
Features:
Excellent Adhesion, Excellent Pigment Binding Properties, Low Temperature Performance, Improved Washing Fastness, Good Film Former, Improved Flexibility, Low Temperature Flexibility
Texicryl® 13-220 is a self crosslinking acrylic copolymer emulsion. Characterized by a very soft flexible film giving after curing, a good resistance to washing on printed textiles. Its adhesion is excellent on the majority of substrates and it’s flexibility remains good at low temperature.
Texicryl® 13-314
Chemical Family:
Acrylics & Acrylates
Functions:
Rheology Modifier, Thickener
Physical Form:
Emulsion, Liquid
Texicryl® 13-314 is an acrylic copolymer emulsion designed for use as a thickener in aqueous-based systems. It can be hydrolyzed under alkaline conditions for this purpose. The product must be stored in the original, unopened, undamaged containers in a dry place at temperatures between 5°C and 30°C.
Texipol 63-400
Product Families:
Rheology Modifiers & Stabilizers, Thermoset Resins, Additives
Chemical Family:
Acrylics & Acrylates
Polymer Name:
Thermoset Polyester
End Uses:
Toys
Texipol 63-400 is an inverse emulsion thickener that imparts a pseudoplastic rheology to aqueous based compositions. It is supplied as a pre-neutralised dispersion as the sodium salt of an acrylic copolymer which gives almost instantaneous thickening when mixed directly into aqueous formulations.
Texipol 63-425
Applications:
Sports & Recreation
Product Families:
Rheology Modifiers & Stabilizers, Thermoset Resins, Additives
Chemical Family:
Acrylics & Acrylates
Polymer Name:
Thermoset Polyester
End Uses:
Waterborne Coating, Waterborne Adhesive
Texipol 63-425 is a next generation inverse emulsion synthetic thickener based on a significant proportion of bio-derived content. It shows broad pH compatibility and imparts pseudoplastic rheology to aqueous compositions and is supplied as a pre-neutralised dispersion as the sodium salt of an acrylic based polymer.
Texipol 63-450
Applications:
Sports & Recreation
Product Families:
Rheology Modifiers & Stabilizers, Thermoset Resins, Additives
Chemical Family:
Acrylics & Acrylates
Polymer Name:
Thermoset Polyester
End Uses:
Waterborne Coating, Waterborne Adhesive
Texipol 63-450 is an inverse emulsion thickener that imparts a highly pseudoplastic rheology to aqueous based compositions. It is supplied as a pre-neutralised dispersion as the sodium salt of an acrylic copolymer and shows thickening over a very wide pH range of 2 - 12.
Show
36
of 73 results
1
2
3