Products

Texipol 63-513 is a next generation inverse emulsion synthetic thickener based on a significant proportion of bio-derived content. It imparts pseudoplastic rheology to aqueous compositions and is supplied as a pre-neutralized dispersion, as the sodium salt of an acrylic based polymer. Texipol 63-513 shows broad pH compatibility.

Texicryl® 13-602 is a styrene acrylic copolymer emulsion designed for use in flexible fillers, caulks, sealant applications and architectural coatings. It enhances the workability and technical performance of many products. It meets all environmental demands, such as low VOC, APEO-free and formaldehyde-free with no compromise on quality and performance.

Texicryl® 13-812 is an alkali swellable emulsion designed for water-based printing ink formulations. It has excellent rub resistance and transfer properties. It is designed for use in flexographic inks for corrugated board. It is also suitable as a pigment grinding medium and let down vehicle.

Texipol 63-510 is an inverse emulsion thickener that imparts a highly pseudoplastic rheology to aqueous based compositions. It is supplied as a pre-neutralized dispersion, as the sodium salt of an acrylic copolymer and shows thickening over a very wide pH range of 2 - 12.

Texicryl® 13-318 is a hydrophobically modified alkali swellable emulsion designed for use as a rheology modifier in waterbased formulations. It is highly effective in modifying viscosities at low shear rates to avoid both settling and sagging. This emulsion can be used in cartidge products and construction adhesives.

Texicryl® 13-400 is a formaldehyde free, cationic emulsion binder, specially designed for textile applications. It has been specially designed for textile applications using processes like pigment dyeing, mordant and printing. The product benefits are high crock-fastness, washing performance, excellent color yield and soft handle.

Texipol 63-237 is a multifunctional inverse emulsion thickener developed specifically for the pigment printing of textiles. It shows good all round performance with universal pigment and binder compatibility. It is supplied as a pre-neutralized dispersion as the ammonium salt of an acrylic copolymer.

Texicryl® 13-503 is a styrene acrylic copolymer emulsion designed for the formulation of printing inks for application to non absorbent, low surface energy substrates. It is used in the formulation of printing inks for substrates such as polyethylene, polypropylene and various foils.

Texipol 63-258 is an inverse emulsion thickener that imparts a highly pseudoplastic rheology to aqueous based compositions. It is supplied as a pre-neutralized dispersion, as the ammonium salt of an acrylic copolymer.This product acts as a thickener for various aqueous based adhesive and coating systems. In particular it can be used to thicken anionic bituminous systems, shoe creams and textured coatings.

Crystic® Polyester Resin 272E is an isophthalic polyester resin designed for use in hot climates. It is used in high-performance applications such as pipes, tanks, and ducting. This versatile resin is suitable for use in filament winding, pultrusion, centrifugal molding, or contact molding processes. It has a 25-minute gel time.

Crystic® Gelcoat LS 97PA Isopthalic Spray is our best weathering isophthalic spray gelcoat. It exhibits low color change and superior gloss retention when compared to all other isophthalic competitive gel coats tested. This product can be used across all markets, and it has excellent water resistance and Lloyd's approval for the marine market.

Texicryl® 13-308 is an alkali soluble emulsion designed as a thickener for water-based formulations. It can be used in the formulation of ceramic tile adhesives, paints, waterborne coating systems and for use in EN 12004-1and2: 2017 D1 CTAs, a wide range of building adhesives and highly filled coatings.

Crystic® Laminating Resin 4252.4 TEPA V01 is an orthophtalic, pre-accelerated, low styrene emission (LSE), thixotropic unsaturated polyester resin. This product can be used for spray application or for contact molding when fast mold turn-around or thick laminates are required. It is an incredibly versatile laminating resin, and its excellent mechanical properties make it ideal for bonding on acrylic sheets for sanitary use.

Crystic® Vinyl Ester Resin VE 679PA is a pre-accelerated, thixotropic, DCPD modified, vinyl ester laminating and tooling resin with excellent surface finish for marine skin coat as well as for tooling applications. It has a gel time of 23 minutes.

Texicryl® 13-217 is an APEO free self-crosslinking acrylic copolymer emulsion characterised by a soft film giving, after crosslinking, a high resistance to washing and to primed or printed fabrics. It is ideal for the manufacturing of non woven fabrics and as flocking adhesive by spraying, in full bath or by foaming.

Texicryl® 13-601 is a pure acrylic copolymer emulsion designed for use in both interior and exterior coating applications. It is designed for use in the formulation of solvent free decorative coatings with excellent durability and low dirt pick up. Other applications include artist’s colors and hobby paints.

Crestapol® 1261 Urethane Acrylate Resin is a modified version of Crestapol® 1260 but with an extended open or work time. It is a low-viscosity urethane acrylate type resin that is suitable for infusion, resin transfer molding (RTM), and similar processes at room temperature and can be infused at vacuum levels down to -1.0 bar. This product produces laminates with high strength, toughness, and exceptional water and hydrolysis resistance.

Crestapol® 1214 Urethane Acrylate Resin is a tough, low-shrink, high-quality, surface-finish urethane acrylate resin for pultrusion. When filled with ATH, it has very high fire, smoke, and toxic fume performances, along with an excellent surface finish. It lacks cracking in the central sections.

Crestapol® 1213A Urethane Acrylate Resin is a thermosetting resin based on methacrylates that is amine pre-accelerated and heavily filled with 170 phr alumina trihydrate (ATH) fire retardant filler to achieve excellent low smoke and low toxicity fire performance. This resin is developed specially for both hand lamination and closed mold applications.

Texicryl® 13-809 is a styrene acrylic emulsion polymer designed for high gloss, water-based overprint varnishes and heat resistant inks. This styrene acrylic binder has been designed to provide superb clarity, water resistance, heat resistance, gloss etc. It can be used as deblocking modifier.

Texicryl® 13-313 is an alkali swellable thickener designed for water-based formulations. It is highly effective in modifying viscosities at low shear rates to avoid both settling and sagging. It has been designed for use in the formulation of textured coatings, woodstains, paints and waterborne coating systems.

Crystic® Isophthalic Brush Gelcoat GT-600 is our gelcoat range providing a fast, precise service producing high quality gelcoats for you. Recommended for use in all markets including marine, land transport and building applications. It is also suitable for general molding requirements.

Crystic® Polyester Resin 2.8500PA is a low-styrene emission, pre-accelerated, orthophthalic polyester resin that rapidly wets out reinforcements. It is a general-purpose resin that is suitable for non-critical and industrial applications such as liners, pipes, and tanks. This product has a 17-minute gel time.

Texicryl® 13-074 is an APEO free styrene acrylic copolymer emulsion which has been developed for use in mixes containing portland cement for flooring applications. It imparts a higher degree of flexibility and also acts as a soft binder used in fabric glue formulations for tissues and papers.

Crystic® Spray Gelcoat 92PA is a chemical resistant spray gelcoat. It is suitable for the manufacture of bathroom products such as sinks, baths, shower trays and water slides and has been used successfully in the industry for many years. It is easy to use and repair.

Crestamould® Gelcoat 15PA (B) is a pre-accelerated brush gelcoat specially formulated from a vinyl ester base resin and has been developed to have excellent gloss retention alongside impact, heat and chemical resistance. The viscosity profile ensures even coverage with minimal drainage and low film porosity. Crestamould® Gelcoat 15PA (B) is recommended for use in the manufacture of high quality FRP composite tooling.

Crystic® Fireguard Gelcoat 70PA is our market leading halogen-free fire retardant gelcoat. It has been specifically designed for very stringent fire approvals particularly requiring low smoke characteristics. It achieves TS45545 HL2 with Crestapol 1212 and has low surface spread of flame. It can also be used with standard polyester fire retardant resins.

Crystic® Orthophthalic Topcoat 402PA is a pre-accelerated topcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. The product has been formulated for brush application.

Crestapol® 1216 Urethane Acrylate Resin is a tough, low-viscosity resin with a rapid cure. This product can be highly filled to achieve a high level of fire and smoke performance (ASTM E84 Class 1). It is designed for use in hand lamination applications.

Crystic® Isophthalic Brush Topcoat 65PAX is a general purpose, brush isophthalic topcoat which cures tack free when applied to the reverse side of a laminate. It can be used in applications where the back surface of a polyester laminate needs to be given a gelcoat finish to improve aesthetics.

Crystic® Glosscoat is a polyester coating designed to be applied over prepared crystic primecoat to give a glossier and more durable surface. The material hardens rapidly and can be easily sanded to a smooth surface which can be polished to high gloss. It is designed for spray application using gravity fed, siphon or pressure pot systems.

Texicryl® 13-824 is a styrene acrylic copolymer emulsion that can be coalesced to form a solvent and plasticiser resistant film. This hard non-film forming emulsion shows excellent adhesion to vinyl and non-absorbent susbstrates. It has been developed for the formulation of plasticiser resistant inks and is suitable for PVC flooring and wallpaper inks.

Texicryl® 13-073 is a styrene acrylic copolymer emulsion, designed primarily for the production of flexible, water-resistant ceramic tile adhesives. This emulsion is especially suitable for floor tile adhesives and also used in the formulation of primer systems. It controls the porosity and aids adhesion to the base substrates.

Texicryl® 13-814 is a styrene acrylic copolymer aqueous dispersion with excellent flexibility and adhesion properties. It is suitable for use as the main binder in flexo or gravure inks and has good clarity so is suitable for offset overprint. This acrylic dispersion will also be suitable to compound into barrier coatings, as it exhibits very low MVTR and Cobb values.

Texicryl® 13-070 is a styrene acrylic copolymer emulsion designed primarily as a binder for D1 ceramic tile adhesives. It has been designed to be formulated, with a wide range of filler types, into D1 tile adhesives. It acts as a binder for use in EN 12004-1and2: 2017 D1 CTAs, economic exterior and interior coatings, fence stains and flat paints.

Crestacryl® 71-8026 is a thermoplastic acrylic resin with very rapid solvent release and drive-over ability. This resin possesses good quality properties such as excellent hardness, very good elasticity and adhesion. It can be used as a high grade road-marking paint with excellent solvent release.