Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Sustainability
Products
Cosmetic Ingredients
Food Ingredients
Knowde for Suppliers
Browse
Sample
Chat
Request
Search
Products
Scott Bader
All Scott Bader
Search products
Matching Product Categories
CASE Ingredients
Industrial Additives & Materials
Composite Materials
Markets
Labeling Claims
Physical Form
Regional Availability
All Filters
44 Products found on Scott Bader
Most Viewed
TDS
With TDS
Texipol 63-513
Product Families:
Rheology Modifiers & Stabilizers, Additives
Chemical Family:
Acrylics & Acrylates
End Uses:
Waterborne Adhesive, Waterborne Coating
Texipol 63-513 is a next generation inverse emulsion synthetic thickener based on a significant proportion of bio-derived content. It imparts pseudoplastic rheology to aqueous compositions and is supplied as a pre-neutralized dispersion, as the sodium salt of an acrylic based polymer. Texipol 63-513 shows broad pH compatibility.
Texicryl® 13-602
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
Compatible Substrates & Surfaces:
Wood
Glass Transition Temperature (Tg):
30.0 - 30.0 °C
Texicryl® 13-602 is a styrene acrylic copolymer emulsion designed for use in flexible fillers, caulks, sealant applications and architectural coatings. It enhances the workability and technical performance of many products. It meets all environmental demands, such as low VOC, APEO-free and formaldehyde-free with no compromise on quality and performance.
Texicryl® 13-812
Applications:
Bookbinding, Bookbinding Adhesives, Flexography
Product Families:
Acrylics, Functional Additives, Additives
Chemical Family:
Acrylics & Acrylates
End Uses:
Flexography Ink
Texicryl® 13-812 is an alkali swellable emulsion designed for water-based printing ink formulations. It has excellent rub resistance and transfer properties. It is designed for use in flexographic inks for corrugated board. It is also suitable as a pigment grinding medium and let down vehicle.
Texipol 63-510
Product Families:
Rheology Modifiers & Stabilizers, Additives
Chemical Family:
Acrylics & Acrylates
End Uses:
Waterborne Adhesive, Waterborne Coating
Texipol 63-510 is an inverse emulsion thickener that imparts a highly pseudoplastic rheology to aqueous based compositions. It is supplied as a pre-neutralized dispersion, as the sodium salt of an acrylic copolymer and shows thickening over a very wide pH range of 2 - 12.
Texicryl® 13-318
Applications:
Decorative Paints, Coatings & Stains, Wood Coatings & Finishes, Decorative Paints
Product Families:
Surface Modifiers, Rheology Modifiers & Stabilizers, Additives
Chemical Family:
Alkali Swellable Emulsion (ASE) Thickener, Acrylics & Acrylates
End Uses:
Waterborne Coating
Texicryl® 13-318 is a hydrophobically modified alkali swellable emulsion designed for use as a rheology modifier in waterbased formulations. It is highly effective in modifying viscosities at low shear rates to avoid both settling and sagging. This emulsion can be used in cartidge products and construction adhesives.
Texicryl® 13-601
Chemical Family:
Acrylics & Acrylates
End Uses:
Waterborne Coating, Top Coat
Glass Transition Temperature (Tg):
8.0 - 8.0 °C
Features:
Less Dirt Pick Up Potential, High Durability
Texicryl® 13-601 is a pure acrylic copolymer emulsion designed for use in both interior and exterior coating applications. It is designed for use in the formulation of solvent free decorative coatings with excellent durability and low dirt pick up. Other applications include artist’s colors and hobby paints.
Texicryl® 13-400
Applications:
Textile Manufacturing, Digital Printing, Printing & Inks
Product Families:
Finishing Additives & Treatments, Textile & Leather Chemicals
Chemical Family:
Acrylics & Acrylates
End Uses:
Textiles, Digital Ink
Texicryl® 13-400 is a formaldehyde free, cationic emulsion binder, specially designed for textile applications. It has been specially designed for textile applications using processes like pigment dyeing, mordant and printing. The product benefits are high crock-fastness, washing performance, excellent color yield and soft handle.
Texipol 63-237
Applications:
Textile Manufacturing, Leather & Textiles
Product Families:
Finishing Additives & Treatments, Rheology Modifiers & Stabilizers, Additives
End Uses:
Waterborne Adhesive, Textiles, Waterborne Coating
Texipol 63-237 is a multifunctional inverse emulsion thickener developed specifically for the pigment printing of textiles. It shows good all round performance with universal pigment and binder compatibility. It is supplied as a pre-neutralized dispersion as the ammonium salt of an acrylic copolymer.
Texicryl® 13-503
Chemical Family:
Styrene-Acrylic Copolymer, Acrylics & Acrylates
End Uses:
Waterborne Coating
Compatible Substrates & Surfaces:
Plastics, Polyethylene (PE), Polypropylene (PP)
Glass Transition Temperature (Tg):
-50.0 - -50.0 °C
Features:
High Gloss, Water Resistance, Abrasion Resistance, Reduces Rub-out
Texicryl® 13-503 is a styrene acrylic copolymer emulsion designed for the formulation of printing inks for application to non absorbent, low surface energy substrates. It is used in the formulation of printing inks for substrates such as polyethylene, polypropylene and various foils.
Texicryl® 13-217
Functions:
Binder, Binder & Resin
Chemical Family:
Acrylics & Acrylates
Compatible Substrates & Surfaces:
Textiles
Features:
Self Crosslinking, Excellent Water Wash Capabilities, Good Film Former
Texicryl® 13-217 is an APEO free self-crosslinking acrylic copolymer emulsion characterised by a soft film giving, after crosslinking, a high resistance to washing and to primed or printed fabrics. It is ideal for the manufacturing of non woven fabrics and as flocking adhesive by spraying, in full bath or by foaming.
Texicryl® 13-308
Functions:
Thickener, Rheology Modifier, Binder & Resin
Chemical Family:
Acrylics & Acrylates
End Uses:
Waterborne Coating
Physical Form:
Liquid, Dispersion, Emulsion
Texicryl® 13-308 is an alkali soluble emulsion designed as a thickener for water-based formulations. It can be used in the formulation of ceramic tile adhesives, paints, waterborne coating systems and for use in EN 12004-1and2: 2017 D1 CTAs, a wide range of building adhesives and highly filled coatings.
Texicryl® 13-809
Applications:
Bookbinding, Bookbinding Adhesives, Food & Beverage Packaging
Product Families:
Acrylics, Resins & Binders
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Waterborne Coating, Waterborne Ink, Other Ink Types
Texicryl® 13-809 is a styrene acrylic emulsion polymer designed for high gloss, water-based overprint varnishes and heat resistant inks. This styrene acrylic binder has been designed to provide superb clarity, water resistance, heat resistance, gloss etc. It can be used as deblocking modifier.
Texicryl® 13-074
Applications:
Sealants & Caulks, Other Building Materials, Floor Coatings
Product Families:
Acrylics, Finishing Additives & Treatments, Cement & Concrete Additives
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Paper & Pulp, Cement, Building Materials
Texicryl® 13-074 is an APEO free styrene acrylic copolymer emulsion which has been developed for use in mixes containing portland cement for flooring applications. It imparts a higher degree of flexibility and also acts as a soft binder used in fabric glue formulations for tissues and papers.
Texicryl® 13-691
Chemical Family:
Styrene-Acrylic Copolymer, Acrylics & Acrylates
End Uses:
Top Coat, Primer
Compatible Substrates & Surfaces:
Tile, Ceramic
Features:
Less Dirt Pick Up Potential, Water Resistance, Excellent Adhesion
Texicryl® 13-691 is an APEO free styrene acrylic copolymer emulsion designed for use in a variety of coating compounds and in a wide range of water-based paints and waterproofing compounds. Also used as a flexible water resistant binder for use in EN 12004:2001 D2 (class AA) ceramic tile adhesives and ceramic floor tile adhesives.
Texicryl® 13-819
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Other Ink Types, Waterborne Coating, Varnishes
Compatible Substrates & Surfaces:
Plastics
Glass Transition Temperature (Tg):
93.0 - 93.0 °C
Features:
Blocking Resistance, Heat Resistance, High Gloss
Texicryl® 13-819 is a styrene acrylate based vehicle designed for high gloss heat resistant overprint varnishes. It has been designed for use in hard polymers normally used in the formulating of overprint varnishes, and it can be blended into OPV’s to partially replace the hard polymer and enhance the gloss level. The product is free from APEO based surfactants.
Texicryl® 13-073
Applications:
Shingles & Tiles, Decorative Paints, Coatings & Stains, Construction Adhesives
Product Families:
Acrylics, Resins & Binders
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Tile Adhesive, Primer
Texicryl® 13-073 is a styrene acrylic copolymer emulsion, designed primarily for the production of flexible, water-resistant ceramic tile adhesives. This emulsion is especially suitable for floor tile adhesives and also used in the formulation of primer systems. It controls the porosity and aids adhesion to the base substrates.
Texicryl® 13-824
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
Glass Transition Temperature (Tg):
66.0 - 66.0 °C
Features:
Excellent Adhesion
Texicryl® 13-824 is a styrene acrylic copolymer emulsion that can be coalesced to form a solvent and plasticiser resistant film. This hard non-film forming emulsion shows excellent adhesion to vinyl and non-absorbent susbstrates. It has been developed for the formulation of plasticiser resistant inks and is suitable for PVC flooring and wallpaper inks.
Texicryl® 13-682
Applications:
Decorative Paints, Coatings & Stains, Architectural Coatings, Waterproofing & Weatherproofing
Product Families:
Acrylics, Resins & Binders
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Waterborne Coating
Texicryl® 13-682 is the APEO free Styrene Acrylic copolymer emulsion designed for use in high performance roof coating compounds and in a wide range of water-based paints. It is specifically recommended for the formulation of roof mastics and waterproofing compounds. It has exceptional water resistance after drying yet good water vapour transmission. Compounds made with Texicryl® 13-682 stand up to prolonged ponded water conditions.
Texicryl® 13-070
Applications:
Architectural Coatings, Interior Fixtures, Shingles & Tiles
Product Families:
Acrylics, Resins & Binders
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Tile Adhesive, Waterborne Coating
Texicryl® 13-070 is a styrene acrylic copolymer emulsion designed primarily as a binder for D1 ceramic tile adhesives. It has been designed to be formulated, with a wide range of filler types, into D1 tile adhesives. It acts as a binder for use in EN 12004-1and2: 2017 D1 CTAs, economic exterior and interior coatings, fence stains and flat paints.
Texicryl® 13-620
Applications:
Waterproofing & Weatherproofing, Decorative Paints, Coatings & Stains, Pavement, Highways, Roads & Bridges
Product Families:
Mortar & Gypsum Additives, Cement & Concrete Additives, Acrylics
Chemical Family:
Acrylics & Acrylates
End Uses:
Wall Putty, Cement, Building Materials
Texicryl® 13-620 is an APEO free pure acrylic copolymer emulsion designed for use in the building and construction industry. The polymer offers improved adhesion to various substrates and superior elasticity to relevant mixtures. It is designed for use in flexible mineral sealings, crack-bridging systems, waterproof coatings, fillers, putties, polymer-modified cement and mortar based mixtures of all kinds.
Texicryl® 13-616
Applications:
Decorative Paints, Coatings & Stains, Decorative Paints, Building Materials
Product Families:
Acrylics, Resins & Binders
Chemical Family:
Acrylics & Acrylates
Texicryl® 13-616 is a self crosslinking acrylic copolymer emulsion designed for use in high performance coatings. It is designed for use in high performance coatings with superior water, chemical and blocking resistance. It meets all environmental demands, such as low VOC, APEO-free and formaldehyde-free with no compromise on quality and performance.
Texicryl® 13-013
Applications:
Waterproofing & Weatherproofing, Primers & Lacquers, Fillers, Levellers & Joints
Product Families:
Acrylics, Resins & Binders
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Lacquers, Primer
Texicryl® 13-013 is a styrene acrylic copolymer emulsion containing a plasticizer. The product gives excellent adhesion on substrates and even at low temperature, the flexibility is good. It is suitable for paints, sealants, acrylics, highly filled putties and soft fillers applications.
Texicryl® 17-0330
Applications:
Decorative Paints, Coatings & Stains, Decorative Paints, Other Printing Applications
Product Families:
Acrylics, Resins & Binders
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Waterborne Adhesive, Waterborne Coating, Top Coat
Texicryl® 17-0330 is a styrene acrylic copolymer emulsion designed for use in high performance adhesives, inks, and coatings where flexibility and/or cold temperature flexibility are desired. It can be utilized in a range of water based adhesives and emulsion paint formulations and can easily be formulated into coatings varying in properties from semi-gloss finish to high pigment volume concentration low-cost paints.
Texicryl® 17-0376
Applications:
Shingles & Tiles, Primers & Lacquers, Roof Shingles & Tiles
Product Families:
Acrylics, Thermoset Resins, Resins & Binders
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
Polymer Name:
Thermoset Polyester
End Uses:
Primer
Texicryl® 17-0376 is a modified styrene acrylic copolymer emulsion designed for use in high performance anticorrosive primers. It has been specifically designed for the formulation of low VOC waterbased anticorrosive primers which provide excellent salt spray (to ASTM B117), humidity and prohesion resistance on clean metal substrates.
Texicryl® 13-220
Functions:
Binder
Chemical Family:
Acrylics & Acrylates
Features:
Excellent Adhesion, Excellent Pigment Binding Properties, Low Temperature Performance, Improved Washing Fastness, Good Film Former, Improved Flexibility, Low Temperature Flexibility
Texicryl® 13-220 is a self crosslinking acrylic copolymer emulsion. Characterized by a very soft flexible film giving after curing, a good resistance to washing on printed textiles. Its adhesion is excellent on the majority of substrates and it’s flexibility remains good at low temperature.
Texicryl® 13-314
Chemical Family:
Acrylics & Acrylates
Functions:
Rheology Modifier, Thickener
Physical Form:
Emulsion, Liquid
Texicryl® 13-314 is an acrylic copolymer emulsion designed for use as a thickener in aqueous-based systems. It can be hydrolyzed under alkaline conditions for this purpose. The product must be stored in the original, unopened, undamaged containers in a dry place at temperatures between 5°C and 30°C.
Texicryl® AD9122
Polymer Name:
Thermoset Polyester
Chemical Family:
Styrene-Acrylic Copolymer, Acrylics & Acrylates
Compatible Substrates & Surfaces:
Wood, Metal, Elastomers & Rubbers
Processing Methods:
Casting
Texicryl® AD9122 is a modified styrene acrylic copolymer emulsion that offers excellent water resistance and adhesion to various substrates including wood, rubber and metal. It has been designed for the formulation of low VOC waterbased coatings and can be formulated as mulch coatings for various mulch subatrates.
Texicryl® 13-828
Functions:
Grinding Aid, Binder & Resin
Chemical Family:
Acrylics & Acrylates
End Uses:
Flexography Ink
Texicryl® 13-828 is a highly efficient alkali swellable emulsion designed for water-based printing ink formulations. The product has been designed for use in flexographic inks for corrugated board. It is also suitable as a pigment grinding medium and let down vehicle.
Texicryl® 13-072
Chemical Family:
Styrene-Acrylic Copolymer, Acrylics & Acrylates
End Uses:
Cement, Building Materials
Features:
Excellent Adhesion, Impact Resistance, Improved Flexibility
Physical Form:
Liquid, Dispersion, Emulsion
Texicryl® 13-072 is a styrene-acrylic copolymer emulsion specifically developed for compatibility with cements, especially Portland-type cements. The principal advantages of Texicryl® 13-072 are enhanced adhesion and resilience, leading to improved impact of cements. It can be used in many types of cement based compounds to improve flexibility and resilience, giving improved impact resistance.
Texicryl® 13-607
Chemical Family:
Acrylics & Acrylates
End Uses:
Waterborne Coating
Glass Transition Temperature (Tg):
12.0 - 12.0 °C
Features:
Low VOC
Texicryl® 13-607 is a pure acrylic copolymer emulsion designed for use in a broad range of formulations requiring low VOC, low water uptake and excellent water whitening resistance. It is designed for use in artist’s color formulations as well as for low VOC interior and exterior coating systems. It also shows good water blanching resistance.
Texicryl® 13-078
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Tile Adhesive
Glass Transition Temperature (Tg):
20.0 - 20.0 °C
Features:
Water Resistance, Excellent Adhesion
Texicryl® 13-078 is a styrene acrylic copolymer emulsion, designed primarily as a binder for high performance ceramic tile adhesives. It has been designed to be formulated with a wide range of filler types into water resistant tile adhesives and grouts.
Texicryl® 13-619
Applications:
Fillers, Levellers & Joints, Shingles & Tiles, Construction Adhesives
Product Families:
Acrylics, Resins & Binders
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Tile Adhesive, Waterborne Coating
Texicryl® 13-619 is a styrene acrylic copolymer emulsion designed for formulation of co-solvent free construction adhesives. It can be used in the formulation of high performance water resistant tile adhesives, fix and grouts and general purpose fillers. It meets all environmental demands, such as low VOC, APEO-free and formaldehyde-free with no compromise on quality and performance.
Texicryl® 13-527
Product Families:
Acrylics, Resins & Binders
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Waterborne Coating
Texicryl® 13-527 is a high performance, water-based, styrene acrylic copolymer emulsion with high pigment binding properties. This acrylic dispersion is specifically designed to be used in cold seal adhesive applications. The polymer can be used in combination with Texicryl® 13-528 to achieve desired properties.
Texicryl® 13-528
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Waterborne Coating
Glass Transition Temperature (Tg):
9.0 - 9.0 °C
Texicryl® 13-528 is a soft, high performance styrene acrylic copolymer emulsion designed for use in cold seal adhesive applications. This water based acrylic copolymer is specifically designed for the use in the modification of adhesion characteristics of latex based adhesives.
Texicryl® 13-066
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Tile Adhesive
Compatible Substrates & Surfaces:
Ceramic
Glass Transition Temperature (Tg):
4.0 - 4.0 °C
Features:
Water Resistance, Improved Flexibility
Texicryl® 13-066 is a styrene acrylic copolymer emulsion, designed primarily for the production of flexible, water-resistant ceramic tile adhesives and is especially suitable for floor tile adhesive. It can be compounded into adhesives with a high degree of flexibility for use with wall and floor ceramic tiles.
Texicryl® 13-813
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Other Ink Types, Waterborne Coating, Varnishes
Glass Transition Temperature (Tg):
-9.0 - -9.0 °C
Features:
Good Film Former, High Gloss
Texicryl® 13-813 is a modified styrene acrylic copolymer designed for use in off-set overprinting varnishes. It has been formulated to give excellent gloss over print and superior holdout over unprinted areas. It may also be used for certain graphic arts applications to non-absorbent substrates.
Show
36
of 44 results
1
2