Products

Crestapol® 1260 Urethane Acrylate Resin is a low-viscosity urethane acrylate type resin. It is suitable for infusion, resin transfer molding (RTM), and similar processes at room temperature. This product can be infused at vacuum levels down to -1.0 bar. It produces laminates with high strength, toughness, and exceptional water and hydrolysis resistance.

Crestapol® 1261 Urethane Acrylate Resin is a modified version of Crestapol® 1260 but with an extended open or work time. It is a low-viscosity urethane acrylate type resin that is suitable for infusion, resin transfer molding (RTM), and similar processes at room temperature and can be infused at vacuum levels down to -1.0 bar. This product produces laminates with high strength, toughness, and exceptional water and hydrolysis resistance.

Crestapol® 1214 Urethane Acrylate Resin is a tough, low-shrink, high-quality, surface-finish urethane acrylate resin for pultrusion. When filled with ATH, it has very high fire, smoke, and toxic fume performances, along with an excellent surface finish. It lacks cracking in the central sections.

Crestamould® T28 is an extrudable modified polyester compound designed for milling of small and large plugs or direct limited production molds with Computer Numerical Control (CNC) multiple axis machines. It can be extruded with conventional FRP putty dispensing equipment. The product provides a homogeneous substrate that prevents print from the underlying structure and gives sufficient flexibility to prevent cracks.

Crestapol® 1213A Urethane Acrylate Resin is a thermosetting resin based on methacrylates that is amine pre-accelerated and heavily filled with 170 phr alumina trihydrate (ATH) fire retardant filler to achieve excellent low smoke and low toxicity fire performance. This resin is developed specially for both hand lamination and closed mold applications.

Crestapol® 1250 Urethane Acrylate Resin is a low-viscosity urethane acrylate resin. It is designed for maximum wet out for pultruding fiberglass, carbon fiber, and other fibers. This product efficiently produces fast-curing, very tough, high-strength composites with superior water and hydrolysis resistance. Run times and formulation will depend on the geometry and complexity of the die. It will run very fast, making for very efficient pultruded parts.

Crestapol® 1216 Urethane Acrylate Resin is a tough, low-viscosity resin with a rapid cure. This product can be highly filled to achieve a high level of fire and smoke performance (ASTM E84 Class 1). It is designed for use in hand lamination applications.

Crystic® Transfer Moulding Resin 1143PA is based on a tough, durable orthophthalic unsaturated polyester resin for closed mould use. It is designed for use in Resin Transfer Molding (RTM) and may be used in other resin injection or vacuum assisted techniques.

espol™ 39.00 is a novalac-based epoxy vinyl ester resin designed to provide exceptional mechanical and chemical resistance properties at high operating temperatures. Its novolac-based backbone imparts it with excellent resistance to aggressive chemicals and oxidizing environments. It brings in enhanced durability, showing excellent long-term retention of strength and toughness at elevated temperatures.

Crestamould® T29 Extrudable is a modified polyester compound designed for the milling of large plugs or production molds with CNC multiple axis machines. This material combines unique qualities and it can be extruded up to a thickness of approx. 15mm (0.6”). It provides a homogenous substrate that prevents print from the underlying structure.

Crestaform® Tough 3D printing resin is a high-performance 3D printing resin with superior mechanical performance and excellent reactivity. It can be used in most stereolithography 3D printers and cured by UV light. The level and quality of detail that can be achieved is staggering when using Crestaform® resins to produce your 3D print. The opportunities truly are endless.

Crestamould® T27 Polyester Compound is designed for milling of large plugs (10-25 m, 30-75 ft, ) or direct limited production moulds with Computer Numerical Control (CNC) multiple axis machines. It provides a homogeneous substrate that prevents print from the underlying structure, and gives sufficient flexibility to prevent cracks.

Crystic® Polyester Resin 491 is a thixotropic, isophthalic polyester resin with good water and chemical resistance properties. It was developed for use in a wide range of critical applications that require toughness combined with water and chemical resistance. It is a versatile resin suitable for the fabrication of high-performance boat hulls intended for use in warm or tropical areas.

Crestapol® 1210A Urethane Acrylate Resin is a tough, low-viscosity resin with rapid cure capabilities that can be highly filled. It is specifically designed for use in closed-mold processes. It exhibits excellent toughness and requires no post-cure treatment. The resin has a low viscosity.

Crestapol® 1210 Urethane Acrylate Resin is a tough, low-viscosity resin with a rapid cure that can be highly filled. It is designed for use in closed molding processes. Crestapol® 1210A is a partially pre-accelerated grade that is available. These products are not recommended for open mold applications.

Crestamould® T29 Sprayable is a modified polyester compound designed for the milling of large plugs or production molds with CNC multiple axis machines. This material combines unique qualities and can be sprayed with few passes up to a thickness of approx. 1-3mm (0.04 - 0.12”). It provides a homogenous substrate that prevents print from the underlying structure.

Crestaform® Durable 3D printing resin is a high-performance 3D printing resin with superior mechanical performance and excellent reactivity. It is compatible with most stereolithography 3D printers and is cured by UV light. The level and quality of detail that can be achieved is staggering when using Crestaform® resins to produce your 3D print. The opportunities truly are endless.

Crestapol® 1212 Urethane Acrylate Resin is a tough, low-viscosity, fire-retardant, closed-mold urethane acrylate resin with a rapid cure. When filled with ATH, it has very high fire, smoke, and toxic fume performances, which makes it suitable for demanding applications in the rail market.

Crystic® Transfer Moulding Resin 1141PA is based on Crystic® 1141, a tough, durable orthophthalic unsaturated polyester resin. It is designed for use in resin transfer molding (RTM) and may be used in other resin injection or vacuum-assisted techniques. This product has a longer process time than Crystic® 1142PA.

Crestapol® 1211A Urethane Acrylate Resin is a partially accelerated, filled, tough urethane acrylate resin designed for applications requiring the highest levels of fire and smoke performance. It incorporates a selected grade of alumina trihydrate (ATH), which makes it suitable for the production of laminates where excellent fire resistance and low levels of smoke and toxic fumes are required. This product is halogen-free and does not contain heavy metals.