Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
Applications & Uses
- Cure Method
- Adhesive & Sealant Type
- Coating Type
- Applications
- TEXIPOL® 63-510 is supplied as an easy to use, low viscosity liquid that gives almost instantaneous thickening when mixed directly into aqueous formulations. As the polymer is already in solution it does not require any neutralization or addition of other additives to promote thickening.
- TEXIPOL® 63-510 can thicken both acidic and alkaline compositions and gives stable thickening in various organic acids such as citric and glycolic acid. It will also thicken phosphoric acid effectively. Thickening is normally achieved quite quickly, but in stronger acid and alkaline environments maximum thickening may take somewhat longer.
- TEXIPOL® 63-510 has been used to thicken various water- based adhesives and coating systems where it gives an exceptional creamy consistency. It has also been possible to thicken aqueous blends with N-methylol pyrollidone and other polar solvents. Typical thickener dosages are 0.5-2.0%, though this is system dependent and higher paste viscosities may require higher addition levels.
Properties
- Physical Form
- Appearance
- Creamy liquid
- Characteristics
- Note
*Deionised water thickened with 4% of TEXIPOL® 63-510 as supplied. Brookfield RVT, Spindle 6, 5 rpm at 25°C.
Value | Units | Test Method / Conditions | |
Specific Gravity (at 25°C) | 1.05 | — | — |
Inverse Emulsion Viscosity (Brookfield RVT, Spindle 3, 20rpm at 25°C) | 3000 | mPa.s | — |
Thickened Deionised Water | min. 100,000 | mPa.s | — |
Polymer Charge | Anionic | — | — |
Packaging & Availability
- Packaging Type
- Packaging Information
TEXIPOL® 63-510 is available in drums and IBCs (please check with your local representative).
Storage & Handling
- Storage Conditions
TEXIPOL® 63-510 should be stored between 5 and 30°C in the original, unopened container in a dry, well ventilated place. Protect from freezing and direct sunlight.