Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Sustainability
Products
Cosmetic Ingredients
Food Ingredients
Knowde for Suppliers
Browse
Sample
Chat
Request
Search
category
Industrial
category
Chemical & Industrial Manufacturing
category
Pipes & Tanks
Products
Scott Bader
All Scott Bader
Search products
Product Families
Functions
End Uses
Chemical Family
Features
All Filters
32 Products found on Scott Bader
Most Viewed
TDS
With TDS
Crystic® Polyester Resin 1160PA
Polymer Name:
Thermoset Polyester
Functions:
Surface Finish, Resins, Binders & Matrix Materials
Chemical Family:
Unsaturated Polyester (UPE), Orthophthalics
Processing Methods:
Spray Lay-up
Crystic® Polyester Resin 1160PA is a general-purpose, thixotropic, pre-accelerated, very low styrene emission, orthophthalic polyester resin with low viscosity. It has a 25-minute gel time and is suitable for parts used in building and construction, transportation, and industrial applications. This product is a part of Scott Bader's Crystic® Green system.
Crystic® Polyester Resin 272E
Polymer Name:
Thermoset Polyester
Functions:
Resins, Binders & Matrix Materials, Surface Finish
Chemical Family:
Isophthalics, Polyesters
Color:
Yellow
Processing Methods:
Centrifugal Casting, Filament Winding, Pultrusion, Hand Lay-up
Crystic® Polyester Resin 272E is an isophthalic polyester resin designed for use in hot climates. It is used in high-performance applications such as pipes, tanks, and ducting. This versatile resin is suitable for use in filament winding, pultrusion, centrifugal molding, or contact molding processes. It has a 25-minute gel time.
Crystic® Polyester Resin 2.8500PA
Polymer Name:
Thermoset Polyester
Functions:
Surface Finish, Resins, Binders & Matrix Materials
Chemical Family:
Orthophthalics, Polyesters
Color:
Green
Processing Methods:
Hand Lamination
Crystic® Polyester Resin 2.8500PA is a low-styrene emission, pre-accelerated, orthophthalic polyester resin that rapidly wets out reinforcements. It is a general-purpose resin that is suitable for non-critical and industrial applications such as liners, pipes, and tanks. This product has a 17-minute gel time.
Crystic® Vinyl Ester Resin VE671-03
Polymer Name:
Vinyl Ester Resin
Functions:
Surface Finish, Resins, Binders & Matrix Materials
Chemical Family:
Bisphenol A Type Epoxy, Vinyl Esters
Processing Methods:
Centrifugal Casting
Crystic® Vinyl Ester Resin VE671-03 is a bisphenol A epoxy based, vinyl ester resin. It designed for use in closed mold applications and centrifugal casting processes. It is recommended for the manufacture of fiber reinforced composite tanks, vessels, ducts etc. for use in chemical processing applications.
Crystic® Polyester Resin 491PA
Polymer Name:
Thermoset Polyester
Functions:
Surface Finish, Resins, Binders & Matrix Materials
Chemical Family:
Isophthalics, Polyesters
Color:
Pink
Processing Methods:
Hand Lay-up, Spray Lay-up
Crystic® Polyester Resin 491PA is a pre-accelerated, thixotropic, isophthalic polyester resin with good water and chemical resistance properties. It is versatile and suitable for performance boat hulls destined for use in warm or tropical areas. This product is also suitable for the manufacture of chemical plants, tanks, pipes, and chemical containers. It has a 12-minute gel time.
Crystic® Pipe Relining Resin 4044TV01
Polymer Name:
Thermoset Polyester
Functions:
Surface Finish, Resins, Binders & Matrix Materials
Chemical Family:
Isophthalics, Unsaturated Polyester (UPE)
Crystic® Pipe Relining Resin 4044TV01 is a thixotropic, non-accelerated ISO/NPG unsaturated polyester resin with a low exotherm. It is specially designed for the pipe-relining market, with good chemical resistance and mechanical properties. This resin is suitable for polyester felt or glass fiber reinforcement.
Crystic® Vinylester Resin VE673
Polymer Name:
Vinyl Ester Resin
Functions:
Surface Finish, Resins, Binders & Matrix Materials
Chemical Family:
Vinyl Esters
Processing Methods:
Injection Molding, Hand Lay-up, Filament Winding
Crystic® Vinylester Resin VE673 is a low-viscosity, non-accelerated, non-thixotropic, high-HDT epoxy novalac vinyl ester resin with outstanding chemical resistance to a wide range of substances at room temperature and elevated temperatures. This product is suitable for laminating and filament winding. It has a 16-minute gel time and can be used for chemical resistance, building and construction, and industrial applications.
Crystic® Polyester Resin 272
Polymer Name:
Thermoset Polyester
Functions:
Surface Finish, Resins, Binders & Matrix Materials
Chemical Family:
Unsaturated Polyester (UPE), Isophthalics
Color:
Yellow
Processing Methods:
Hand Lay-up, Filament Winding, Pultrusion
Crystic® Polyester Resin 272 is an isophthalic polyester resin. It is recommended for use in high-performance applications using filament winding, pultrusion, and centrifugal or contact molding processes. The fully cured laminates have high mechanical strength and excellent strength retention in wet environments at temperatures up to 60ºC.
Crystic® Thixotropic Resin VE676T
Polymer Name:
Vinyl Ester Resin
Functions:
Surface Finish, Resins, Binders & Matrix Materials
Chemical Family:
Bisphenol A Type Epoxy, Vinyl Esters, Epoxy & Epoxy Derivatives
Processing Methods:
Hand Lay-up, Spray Lay-up
Crystic® Thixotropic Resin VE676T is a thixotropic version of Crystic® VE676, an epoxy bisphenol A based vinyl ester resin. This product is suitable for hand lay-up, spray lay-up, and similar processes. Thixotropic additives provide applied material sag resistance to vertical surfaces.
Crestamould® Resin 474PA
Polymer Name:
Polyester (unspecified)
Chemical Family:
Polyesters
Processing Methods:
Hand Lay-up, Pultrusion
End Uses:
Pipes, Tanks
Crestamould® Resin 474PA is a thixotropic, pre-accelerated orthopthalic polyester resin with good heat and chemical resistance properties. This product is suitable for the construction of tanks, pipes, and fume stacks to operate in environments where heat and chemical resistance are both required. A non-thixotropic, non-accelerated version of this resin is available as Crystic® 198.
Crystic® Brush Gelcoat 69PA
Applications:
Equipment & Parts, Housewares, Pipes & Plumbing
Product Families:
Gelcoats & Topcoats, Surface Finishes
Chemical Family:
Polyesters
End Uses:
Pipes, Tanks
Crystic® Brush Gelcoat 69PA is a pre-accelerated Iso-NPG gelcoat formulated for brush application. It has been developed to have exceptional water and chemical resistance and is recommended for use in sanitaryware and chemical containment applications. Crystic® Gelcoat 69PA is approved by Lloyd'™s Register of Shipping.
Crystic® Orthophthalic Spray Topcoat 408PA
Applications:
Glazing & Window Elements, Shingles & Tiles, Parking Structures & Stadiums
Product Families:
Gelcoats & Topcoats, Surface Finishes
Chemical Family:
Orthophthalics, Unsaturated Polyester (UPE)
End Uses:
Pipes, Tanks
Crystic® Orthophthalic Spray Topcoat 408PA White is a pre-accelerated flowcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. The product is pigmented using a highly UV resistant grade of titanium dioxide.
Crystic® Isophthalic Sandable Gelcoat 45PA
Chemical Family:
Isophthalics, Polyesters
Functions:
Resins, Binders & Matrix Materials, Surface Finish
End Uses:
Pipes, Tanks
Features:
Good Surface Finish, Excellent Surface Finish, Good Sanding Properties
Crystic® Isophthalic Sandable Gelcoat 45PA is an isophthalic sandable gel coat that is filled, pre-accelerated, and formulated for spray application. This product provides an excellent surface finish and base for post-painting. It is specially designed for applications that are to be post-painted.
Crystic® Polyester Resin R115PA
Polymer Name:
Thermoset Polyester
Functions:
Surface Finish, Resins, Binders & Matrix Materials
Chemical Family:
Unsaturated Polyester (UPE), Orthophthalics, Polyesters
Color:
Pink
Processing Methods:
Hand Lay-up, Spray Lay-up
Crystic® Polyester Resin R115PA is a general purpose thixotropic, pre-accelerated, orthophthalic, unsaturated polyester resin. It has a 10-minute gel time and is suitable for use in buidling and construction, transportation and industrial applications by hand lay up or by spray application for the production of most glass reinforced laminates.
Crystic® Ecogel S4PA
Chemical Family:
Isophthalics, Polyesters
Functions:
Surface Finish
Processing Methods:
Spray Lay-up
End Uses:
Tanks, Pipes
Features:
Low Styrene Content, Good Surface Appearance, Great Surface Appearance, Weather Resistance, Good Surface Finish, Excellent Surface Finish, Good Weather Stability, Excellent Gloss Retention
Low Styrene Crystic® Ecogel S4PA is a lower cost option, suitable for industrial applications (not Marine) where users are looking for an industrial option with low styrene content (23% styrene content). It is a high performance isophthalic gelcoat. This gelcoat is pre-accelerated and formulated for spray application.
Crystic® Transfer Moulding Resin 5008ST
Polymer Name:
Thermoset Polyester
Functions:
Surface Finish, Resins, Binders & Matrix Materials
Chemical Family:
Polyesters, Orthophthalics
Processing Methods:
Resin Transfer Molding (RTM)
Crystic® Transfer Moulding Resin 5008ST is a non accelerated orthophtalic resin designed for use by RTM (Resin Transfer Molding) techniques, with excellent mechanical properties. Its rheology makes it suitable to be processed by vacuum injection or wet press as well.
Crystic® Transfer Moulding Resin 782PA
Polymer Name:
Thermoset Polyester
Functions:
Surface Finish, Resins, Binders & Matrix Materials
Chemical Family:
Polyesters, Orthophthalics
Color:
Green
Processing Methods:
Resin Transfer Molding (RTM)
Crystic® Transfer Moulding Resin 782PA is an orthophthalic polyester resin, designed for use in RTM. It is a versatile resin, ideally suited to environments where heat and chemical resistance are both required. Crystic® 782 is a non-accelerated version of this resin.
Crystic® Pipe Relining Resin PD10154I
Polymer Name:
Thermoset Polyester
Functions:
Surface Finish, Resins, Binders & Matrix Materials
Chemical Family:
Magnesium & Magnesium Compounds, Unsaturated Polyester (UPE), Orthophthalics
Crystic® Pipe Relining Resin PD10154I is a magnesium oxide thickenable, orrthophtalic neopentyl glycol, unsaturated polyester resin with UV photoinitiator. This product is specially developed for UV curing systems and the relining pipe repair industry. It has excellent mechanical properties, resistance to water ingress, and impact resistance.
Crystic® Laminating Resin 1122PA
Polymer Name:
Thermoset Polyester
Functions:
Surface Finish, Resins, Binders & Matrix Materials
Chemical Family:
Orthophthalics, Unsaturated Polyester (UPE)
Color:
Green
Processing Methods:
Spray Lay-up
Crystic® Laminating Resin 1122PA is an orthophthalic, low-viscosity, unsaturated polyester resin. It is supplied as a solution dissolved in monomeric styrene. This product is pre-accelerated to give sufficient pot life for contact molding using Andonox® KP9 catalyst at normal ambient temperatures. It is suitable for a wide range of applications. This product has been specially formulated to give rapid wetting and impregnation of reinforcements and to aid in the elimination of air. It is almost colorless when cured.
Crystic® High Performance Resin 3642.3
Polymer Name:
Thermoset Polyester
Functions:
Surface Finish, Resins, Binders & Matrix Materials
Chemical Family:
Unsaturated Polyester (UPE), Orthophthalics
Color:
Yellow
Processing Methods:
Hand Lay-up, Spray Lay-up, Filament Winding
Crystic® High Performance Resin 3642.3 can be used by spray, filament winding, or hand layup. This resin can be used in many applications, but its high performance makes it particularly suitable for the production of oil tanks. Additionally, it can also be used for direct bonding on sanitary acrylic.
Crystic® Pipe Relining Resin PD10098T
Polymer Name:
Thermoset Polyester
Functions:
Surface Finish, Resins, Binders & Matrix Materials
Chemical Family:
Unsaturated Polyester (UPE), Orthophthalics
Crystic® Pipe Relining Resin PD10098T is a thixotropic, non-accelerated, high-reactive orthophthalic neopentylglycol unsaturated polyester resin. It is specially developed for the production of liners in the pipe relining industry. Fully cured laminates of this product offer high chemical resistance and mechanical properties, as well as excellent long-term property retention.
Crystic® Polyester Resin 197M
Polymer Name:
Thermoset Polyester
Functions:
Surface Finish, Resins, Binders & Matrix Materials
Chemical Family:
Unsaturated Polyester (UPE), Orthophthalics
Processing Methods:
Filament Winding
Crystic® Polyester Resin 197M is a medium-reactivity, orthophthalic, unsaturated polyester resin with very high mechanical properties. It is suitable for pipe and tank manufacture. This product has an 18-minute gel time and functions as a resin, binder, and matrix material.
Crystic® Pipe Relining Resin D3846SA
Polymer Name:
Thermoset Polyester
Functions:
Surface Finish, Resins, Binders & Matrix Materials
Chemical Family:
Isophthalics, Unsaturated Polyester (UPE)
Color:
Green
Crystic® Pipe Relining Resin D3846SA is a thixotropic, non-accelerated, isophthalic, unsaturated polyester resin with low exotherm. It is specially designed for the production of liners to be used in the pipe relining industry. The fully cured liners offer high chemical resistance and mechanical properties.
Crystic® Resin 3454.4T AC01
Polymer Name:
Thermoset Polyester
Functions:
Surface Finish, Resins, Binders & Matrix Materials
Chemical Family:
Unsaturated Polyester (UPE), Orthophthalics
Processing Methods:
Hand Lay-up, Spray Lay-up, Filament Winding
Crystic® Resin 3454.4T AC01 has been designed for filament winding application but can also be used by hand layup or spray techniques. Its medium-to-high reactivity allows for a fast curing time, even on thin laminates. This resin is suitable for the production of glass-reinforced laminates when heat distortion resistance is required. Its high performance makes it particularly suitable for the production of oil tanks and pipes.
Crystic® Vinylester Resin VE671
Polymer Name:
Vinyl Ester Resin
Functions:
Surface Finish, Resins, Binders & Matrix Materials
Chemical Family:
Bisphenol A Type Epoxy, Vinyl Esters
Processing Methods:
Hand Lay-up, Injection Molding, Filament Winding
Crystic® Vinylester Resin VE671 is an epoxy Bisphenol A based standard vinyl ester resin. It has outstanding chemical resistance to a wide range of substances, (acids, alkalies, oxidising agents) at room and elevated temperatures. The product is suitable for fabrication of fiber reinforced composites by all conventional techniques (contact molding, filament winding and injection molding) and for use in many chemical processing industry applications (storage tanks, vessels, ducts).
Crystic® CiPP Resin D5101
Polymer Name:
Polyester (unspecified)
Functions:
Resins, Binders & Matrix Materials, Surface Finish
Chemical Family:
Polyesters
Crystic® CiPP Resin D5101 is an unaccelerated, thixotropic, isophthalic polyester resin ideally suited for use in the production of liners for pipe relining. Thanks to Cured-In-Place-Pipe (CiPP) technology, this resin can be used to create a new pipe lining within an existing pipe structure, making it efficient and easy to use. Once fully cured, the laminates have good chemical resistance and mechanical properties, as well as long-term property retention. This resin is therefore ideal for heavy duty, high frequency, and industrial applications. This resin should be allowed to reach workshop temperature before use, at which point its gel time will be between 3 and 6 minutes. It requires the addition of a catalyst for the curing process to begin. However, further additives such as pigments and fillers may affect its natural properties, and their effects should be evaluated before use.
Crystic® Ultra-Low Styrene Ecogel S1PA
Chemical Family:
Isophthalics, Polyesters
Functions:
Resins, Binders & Matrix Materials, Surface Finish
Processing Methods:
Spray Lay-up
End Uses:
Pipes, Tanks
Features:
Excellent Surface Finish, Low Styrene Content, Good Surface Finish, Good Weather Stability, Excellent Gloss Retention, Low VOC, Consistent High Quality, High Performance, Weather Resistance
Crystic® Ultra-Low Styrene Ecogel S1PA is an ultra-low-styrene-content spray gel coat. This market-leading, unique technology spray gel coat has only 16% styrene content, which cuts styrene emissions by over 55%. It is suitable for use in industrial and general-purpose applications in transport, building, and industrial markets. This product is also used for the manufacture of wind turbine blades.
Crystic® Transfer Moulding Resin 785PA
Polymer Name:
Thermoset Polyester
Functions:
Surface Finish, Resins, Binders & Matrix Materials
Chemical Family:
Polyesters
Color:
Pink
Processing Methods:
Resin Transfer Molding (RTM)
Crystic® Transfer Moulding Resin 785PA is apre-accelerated, DCPD based, polyester resin designed for use in RTM (Resin Transfer Molding). It has a lower styrene content than conventional RTM resins and can significantly reduce the occurrence of print through, to produce moldings with an enhanced surface finish.
Crystic® Polyester Resin 196E
Polymer Name:
Thermoset Polyester
Functions:
Resins, Binders & Matrix Materials, Surface Finish
Chemical Family:
Orthophthalics, Polyesters
Color:
Yellow
Processing Methods:
Reaction Injection Molding (RIM), Injection Molding, Cold Press Molding, Spray Lay-up, Filament Winding, Pultrusion, Hand Lay-up
Crystic® Polyester Resin 196E is a non-accelerated, non-thixotropic, orthophthalic polyester resin for use in hot climates. It has Lloyd's approval and can be used in marine, transportation, building and construction, and industrial applications. This product is particularly suitable for filament winding and pultrusion processes.
Crystic® Polyester Resin 198
Polymer Name:
Thermoset Polyester
Functions:
Surface Finish, Resins, Binders & Matrix Materials
Chemical Family:
Polyesters, Orthophthalics
Crystic® Polyester Resin 198 is a medium-viscosity orthophthalic polyester resin with good heat and chemical resistance properties. This product was developed for use in the chemical industry (tanks, pipes, fume stacks, etc.), where heat and chemical resistance are both required, but it can also be used in industrial, transportation, and building and construction applications. It can be used with glass fiber-backed polypropylene and suitably treated uPVC. This product has a high HDT of 112°C and a 12-minute gel time.
Crystic® Ecogel S0PA
Chemical Family:
Polyesters, Isophthalics
Functions:
Surface Finish
Processing Methods:
Spray Lay-up
End Uses:
Pipes, Tanks
Features:
Weather Resistance, Good Surface Finish, Excellent Surface Finish, Good Weather Stability, Excellent Gloss Retention, Consistent High Quality, Low Styrene Content
Zero Styrene Crystic® Ecogel S0PA is a zero styrene spray gelcoat for industrial applications such as the wind energy sector. This product is acetone free and can be used with Butanox® M-50. Key features include: High elongation Zero Styrene Content Excellent weathering performance Easy to apply Low VOC emission
Crystic® Polyester Resin 123PA
Polymer Name:
Polyester (unspecified)
Functions:
Resins, Binders & Matrix Materials, Surface Finish
Chemical Family:
Unsaturated Polyester (UPE)
Crystic® Polyester Resin 123PA is a medium-thixotropic, tropicalized, pre-accelerated waxed unsaturated polyester resin. This resin is specially formulated to provide rapid wetting and impregnation of the reinforcement. It is ideally suited for the building of boats, water tanks, bathtubs, shower trays, and other products where water resistance is an important factor.