Products

Crestapol® 1260 Urethane Acrylate Resin is a low-viscosity urethane acrylate type resin. It is suitable for infusion, resin transfer molding (RTM), and similar processes at room temperature. This product can be infused at vacuum levels down to -1.0 bar. It produces laminates with high strength, toughness, and exceptional water and hydrolysis resistance.

Crestapol® 1214 Urethane Acrylate Resin is a tough, low-shrink, high-quality, surface-finish urethane acrylate resin for pultrusion. When filled with ATH, it has very high fire, smoke, and toxic fume performances, along with an excellent surface finish. It lacks cracking in the central sections.

Crestapol® 1261 Urethane Acrylate Resin is a modified version of Crestapol® 1260 but with an extended open or work time. It is a low-viscosity urethane acrylate type resin that is suitable for infusion, resin transfer molding (RTM), and similar processes at room temperature and can be infused at vacuum levels down to -1.0 bar. This product produces laminates with high strength, toughness, and exceptional water and hydrolysis resistance.

Crestapol® 1213A Urethane Acrylate Resin is a thermosetting resin based on methacrylates that is amine pre-accelerated and heavily filled with 170 phr alumina trihydrate (ATH) fire retardant filler to achieve excellent low smoke and low toxicity fire performance. This resin is developed specially for both hand lamination and closed mold applications.

Crestapol® 1250 Urethane Acrylate Resin is a low-viscosity urethane acrylate resin. It is designed for maximum wet out for pultruding fiberglass, carbon fiber, and other fibers. This product efficiently produces fast-curing, very tough, high-strength composites with superior water and hydrolysis resistance. Run times and formulation will depend on the geometry and complexity of the die. It will run very fast, making for very efficient pultruded parts.

Crestapol® 1216 Urethane Acrylate Resin is a tough, low-viscosity resin with a rapid cure. This product can be highly filled to achieve a high level of fire and smoke performance (ASTM E84 Class 1). It is designed for use in hand lamination applications.

Crystic® Polyester Resin 990PA is a pre-accelerated, low-viscosity, modified orthophthalic polyester resin containing styrene and methyl methacrylate. It was developed for use as a filled system in reinforcing ABS acrylic-lined baths, sinks, and shower trays and is designed for spray laminating. This product has a 6-minute gel time.

Crestapol® 1210 Urethane Acrylate Resin is a tough, low-viscosity resin with a rapid cure that can be highly filled. It is designed for use in closed molding processes. Crestapol® 1210A is a partially pre-accelerated grade that is available. These products are not recommended for open mold applications.

Crestomer® Advantage 30 Structural Adhesive is a white, high-performance structural adhesive offering the same advantages as Crestomer® 1151A but in a more convenient, pre-packed 380ml co-axial cartridge. It is particularly suitable for marine applications and has Lloyd's approval. The opaque white color of the adhesive blends well aesthetically with cosmetically sensitive applications.

Crestomer® 1151A Structural Adhesive has Lloyd's approval. This high-performance structural adhesive and filleting compound is specially designed for bulk applications with either a 10:1 catalyst ratio or a 50:1 catalyst ratio. It exhibits non-sagging and fast-gelling properties, enabling the user to work with bonded parts in 2 hours. Compared to other competitive structural adhesives, this product has noticeably less odor and can be used to bond a wide range of substrates with minimal surface preparation.

Crestomer® 1186PA Structural Adhesive is a multi-purpose structural adhesive with exceptional adhesion to a wide range of metals, ceramics, and polymeric materials. In addition, it exhibits superior properties for impact resistance and resistance to crack propagation when compared to polyester bonding pastes. This product is pre-accelerated and maintains a high-strength structural bond even when used as a gap filler with non-slumping and low-odor properties. It has been certified by Lloyds.

Crestomer® 1152PA Structural Adhesive provides high performance and is designed for demanding applications. It creates tough bonds with greater movement and allows for significant time, cost, and weight savings. This product has reduced styrene emissions, and it greatly improves cosmetics. It can be used to bond many substrates and has certified approvals from Lloyds, DNV, and RINA.

Crestapol® 1212 Urethane Acrylate Resin is a tough, low-viscosity, fire-retardant, closed-mold urethane acrylate resin with a rapid cure. When filled with ATH, it has very high fire, smoke, and toxic fume performances, which makes it suitable for demanding applications in the rail market.

Crestomer® 1150PA is a two-part, pre-accelerated, highly thixotropic structural adhesive that is based on unsaturated urethane-acrylate in styrene monomer. It is used in many structural composite applications and has excellent adhesion to FRP laminates, core materials, wood, and some metals. This product can be used for bonding diesel tanks, contour joints in FRP components, building up damaged areas, and bonding "green" FRP.

Crestomer® 1196PA Structural Adhesive is a low-density, high-performance structural core adhesive with good gap-filling properties. This product is based on Scott Bader's innovative urethane acrylate technology and is used in sandwich construction where strong, tough, highly impact-resistant structures are required. Compared to other core bonding methods, this product has reduced print through, reduced weight, and outstanding adhesion. It has Lloyds' approval and can be used to bond many substrates. This product has been formulated to bond core materials such as rigid PVC foam and balsa to cured or semi-cured FRP skins. Using Crestomer® 1196PA gives a significantly tougher and more durable structural bond than a polyester resin/glass structure or polyester bonding adhesive. In addition, it provides significant weight savings, reduced styrene emissions, and greatly improved cosmetics with the elimination of core print-through.

Crestomer® 1153PA Structural Adhesive provides high performance and a long open time designed for demanding applications. More suited to large structural uses, it creates tough bonds with greater movement and allows for significant time, cost, and weight savings to be made. This product has reduced styrene emissions and greatly improves cosmetics. It has Lloyds' approval and can be used to bond many substrates.

Crystic® Polyester Resin 195 is a light-stabilized polyester resin containing styrene and methyl methacrylate. When combined with powder-bonded "E" glass, it is recommended for the production of maximum-clarity GRP sheeting with up to 80% light transmission. This product has a 25-minute gel time.

Crestapol® 1211A Urethane Acrylate Resin is a partially accelerated, filled, tough urethane acrylate resin designed for applications requiring the highest levels of fire and smoke performance. It incorporates a selected grade of alumina trihydrate (ATH), which makes it suitable for the production of laminates where excellent fire resistance and low levels of smoke and toxic fumes are required. This product is halogen-free and does not contain heavy metals.