Products

Crystic® Laminating Resin 4252.4 TEPA V01 is an orthophtalic, pre-accelerated, low styrene emission (LSE), thixotropic unsaturated polyester resin. This product can be used for spray application or for contact molding when fast mold turn-around or thick laminates are required. It is an incredibly versatile laminating resin, and its excellent mechanical properties make it ideal for bonding on acrylic sheets for sanitary use.

Crystic® Polyester Resin 1160PA is a general-purpose, thixotropic, pre-accelerated, very low styrene emission, orthophthalic polyester resin with low viscosity. It has a 25-minute gel time and is suitable for parts used in building and construction, transportation, and industrial applications. This product is a part of Scott Bader's Crystic® Green system.

Crystic® Pipe Relining Resin 4044TV01 is a thixotropic, non-accelerated ISO/NPG unsaturated polyester resin with a low exotherm. It is specially designed for the pipe-relining market, with good chemical resistance and mechanical properties. This resin is suitable for polyester felt or glass fiber reinforcement.

Crystic® Polyester Resin 272 is an isophthalic polyester resin. It is recommended for use in high-performance applications using filament winding, pultrusion, and centrifugal or contact molding processes. The fully cured laminates have high mechanical strength and excellent strength retention in wet environments at temperatures up to 60ºC.

Crystic® Polyester Resin 491PAT is a versatile, pre-accelerated, unsaturated polyester resin with good water and chemical resistance properties. It was developed for use in a wide range of critical applications that require toughness combined with water and chemical resistance. This product is thixotropic and can be applied with either brush or spray equipment. It may also be used in the pultrusion process for the production of profile sections. This product is suitable for the fabrication of high-performance boat hulls destined for use in warm and tropical waters.

Crystic® Orthophthalic Topcoat 402PA is a pre-accelerated topcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. The product has been formulated for brush application.

Crystic® Polyester Resin 125PA is a quality orthophthalic-based unsaturated polyester resin developed specifically for the manufacture of GRP moldings. This medium-viscosity polyester resin meets the requirements of BS 3532:1990 as a type "A" resin and can be used for flat surface laminations. Laminates made with this product have good mechanical strength, high rigidity and impact resistance, and excellent dimensional stability. When used with the recommended curing system, its curing properties make it especially suitable for fast production processes.

Crestafix® 621CC 85 Bonding Paste is a pre-accelerated urethane acrylate/ isophthalic polyester high performance bonding paste. It is a non-sagging, filled compound, specifically designed for the assembly and bonding of GRP moldings. This highliy thixotropic polyester can also be used on timber and plasterboard.

Crystic® Polyester Resin PDME 074 is an acrylic modified orthophthalic unsaturated polyester resin developed specifically for the manufacturing of maximum clarity roofing sheets by continuous sheeting process. It is ultra violet stabilized by the addition of special anti UV additives. The resin also contains acrylic monomers to reduce long term yellowing of the laminates.

Crystic® Polyester Resin R115NT is a general purpose non thixotropic, non accelerated, orthophthalic, unsaturated polyester resin. It has a gel time of 10 minutes and can be used for the production of filled castings or for reinforced laminates on flat molds.

espol™ 12.23 is a non-accelerated orthophthalic polyester resin that rapidly wets out reinforcements. It is a general-purpose resin specifically designed for non-critical and general-purpose applications. It is thixotropic by nature and has anti-sagging properties. It is designed for hand laminating, spray-up, and casting applications.

Crystic® Decorative Casting Resin 911PASA is a pre-accelerated, orthophthalic, unsaturated polyester resin. Its low viscosity helps to accept the maximum level of filler particles. This product is designed for the casting of small details, including collectibles and figurines. It has a 20-minute gel time.

Crystic® Fire Retardant Resin 5046PA is a filled, orthophthalic, pre-accelerated, unsaturated polyester resin suitable for fire retardant applications. It is designed for manufacturing composite parts using hand layup or injection processes. This product is ideal for demanding applications in buildings, public transport, and railways. It has excellent fire resistance and a Q rating of 0.53, achieving M1/F2 standards as a fully cured laminate with Gelcoat 967 PA FR. This product has a low viscosity, which lowers consumption and enhances suitability for RTM processes. The low styrene content also provides better comfort for users, and the stability provides low filler sedimentation. Pigments and additional fillers can be added to this resin. However, their effects should be tested in workshop conditions before being added to the formulation.

espol™ 12.51 is a non-accelerated orthophthalic polyester resin that rapidly wets out reinforcements. It has been specifically formulated for non-critical and general-purpose applications where high reactivity is desirable, making it ideal for laminates that require very fast curing. It provides excellent mechanical strength, rigidity, and long-term durability.

Crystic® High Performance Resin 3642.3 can be used by spray, filament winding, or hand layup. This resin can be used in many applications, but its high performance makes it particularly suitable for the production of oil tanks. Additionally, it can also be used for direct bonding on sanitary acrylic.

espol™ 31.00 is a non-accelerated terephthalic acid-based polyester resin that rapidly wets out reinforcements. It has a medium viscosity and reactivity and exhibits good mechanical and electrical properties, along with good chemical resistance compared to general-purpose resins. It is designed for hand laminating, spray-up, and casting applications.

espol™ 30.01 is a pre-accelerated isophthalic polyester resin that rapidly wets out reinforcements. espol™ 30.01 has a medium viscosity and reactivity and uses superior glycols compared to general-purpose resins, giving it good mechanical and chemical resistance. It is suitable for the fabrication of chemical tanks, industrial applications, and marine applications.

espol™ 17.00 is a non-accelerated orthophthalic polyester resin that rapidly wets out reinforcements. It has been specifically formulated for rooflite applications and offers excellent light transmittance and weather resistance. Additionally, it provides excellent mechanical strength and rigidity, as well as long-term durability. This resin is commonly used in the production of greenhouses, translucent roofing, domes, and architectural panels.

Crystic® Polyester Resin 489 is a thixotropic isophthalic polyester resin. When used with Crystic Gelcoat 65PA, they produce a matched performance system for molding boat hulls with outstanding durability and superior blister resistance. The outstanding wetting characteristics of Crystic 489 provide rapid impregnation with freedom from drainage.

Crestafix® 90-78PA Polyester Bonding Paste is a fast-curing, pre-accelerated, orthophthalic polyester bonding paste. It exhibits exceptional handling properties, especially on GRP and wood substrates. This product has been specifically designed for the assembly and bonding of GRP moldings such as panels, inserts, internal frames, ribs, and any other non-structural bonding applications. It is non-sagging and does not require resin additions.

espol™ 41.00 is a non-accelerated isophthalic neopentyl glycol (ISO-NPG) polyester resin suitable for aggressive marine applications. The resin has been approved by the IRS (Indian Registrar of Shipping) for usage on ships and other marine transport vehicles. It has been specifically formulated for resistance to seawater, offering superior osmotic stability alongside excellent mechanical properties.

Crestafix® 90-82PA Polyester Bonding Paste is a pre-accelerated polyester bonding paste. This product is a viscous, white, filled compound that is specifically designed for the assembly and bonding of GRP moldings. Its applications include panels, inserts, internal frames, ribs, composite constructions, and car body components. This product is a high productivity grade designed for use with narrow mixers that will dispense at a high flow rate while maintaining thixotropic properties upon vertical application.

Crystic® Pipe Relining Resin D3846SA is a thixotropic, non-accelerated, isophthalic, unsaturated polyester resin with low exotherm. It is specially designed for the production of liners to be used in the pipe relining industry. The fully cured liners offer high chemical resistance and mechanical properties.

Crystic® Polyester Resin 921 is an un-accelerated, orthophthalic, unsaturated polyester resin with a low viscosity to accept the maximum level of filler particles. It has been developed specifically for polymer concrete. Crystic® 921PALV is a lower viscosity, thixotropic version of this product. It is suitable for pigmented castings filled to a low level or not filled at all.

Texique® HE20 is a new bio-based high performance thickener for the personal care market. It is produced from 61% naturally derived ingredients, none of which are animal-based. It is an easy to use, multi-functional additive for personal care applications. Providing thickening, stabilising, emulsifying and texturising, it can be used in a range of formulations from sprays to creams.

espol™ 29.00 is a non-accelerated orthophthalic polyester resin that rapidly wets out reinforcements. It is formulated as a superior grade, especially for automotive applications intended for a Class-A surface finish. It is designed for hand lamination, spray-up, and casting as manufacturing processes. It can be used with all types of glass fibers, such as chopped strand mat, woven roving, and multi-axials.

espol™ 12.20 is a non-accelerated orthophthalic clear polyester resin formulated with medium reactivity for specialized casting processes. It has been specifically designed for casting and cold press molding applications associated with quartz agglomerated blocks and sheets. End products made using espol™ 12.20 have excellent strength, rigidity, water resistance, and long-term durability.

Crystic® Resin 3454.4T AC01 has been designed for filament winding application but can also be used by hand layup or spray techniques. Its medium-to-high reactivity allows for a fast curing time, even on thin laminates. This resin is suitable for the production of glass-reinforced laminates when heat distortion resistance is required. Its high performance makes it particularly suitable for the production of oil tanks and pipes.

Crystic® Solid Surface Casting Resin 935PA is a pre-accelerated, high-performance, isophthalic neopentyl glycol unsaturated polyester resin. It is developed specifically for the casting of solid surface products. This high-clarity, low-color resin is supplied at a low to medium viscosity in order to accept the maximum level of fillers, including aluminum trihydrate (ATH) and colored chips or natural stone. For the production of flat sheets, where quicker gel times and cure times are required, Crystic® 935PAHR is available on request.

Crystic® Orthophthalic Topcoat 407PA White is a pre-accelerated Flowcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. This product is pigmented using a highly UV resistant grade of titanium dioxide. It has been formulated for brush application.

Crystic® Orthophthalic Spray Topcoat 408PA White is a pre-accelerated flowcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. The product is pigmented using a highly UV resistant grade of titanium dioxide.

espol™ 12.10 is a non-accelerated orthophthalic polyester resin with low viscosity that rapidly wets out reinforcements. It has been specifically formulated for non-critical and general-purpose applications. This resin is formulated as an extra-clear grade, providing excellent mechanical strength, rigidity, and long-term durability. It is designed for hand lamination, spray-up, RTM, and casting applications.

Crestafix® 621CC 45 Bonding Paste is a pre-accelerated urethane acrylate/ isophthalic polyester high performance bonding paste. It is a non-sagging, filled compound, specifically designed for the assembly and bonding of GRP moldings. This highly thixotropic polyester can also be used on timber and plasterboard.

Crystic® Pipe Relining Resin PD10098T is a thixotropic, non-accelerated, high-reactive orthophthalic neopentylglycol unsaturated polyester resin. It is specially developed for the production of liners in the pipe relining industry. Fully cured laminates of this product offer high chemical resistance and mechanical properties, as well as excellent long-term property retention.

espol™ 39.00 is a novalac-based epoxy vinyl ester resin designed to provide exceptional mechanical and chemical resistance properties at high operating temperatures. Its novolac-based backbone imparts it with excellent resistance to aggressive chemicals and oxidizing environments. It brings in enhanced durability, showing excellent long-term retention of strength and toughness at elevated temperatures.

espol™ 19.00 is a non-accelerated orthophthalic polyester resin suitable for the resin transfer molding (RTM) process. It has been specifically formulated for non-critical and general-purpose applications where high reactivity is desirable. It is designed for laminates that need a very fast cure under closed-mold conditions.