Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Sustainability
Products
Cosmetic Ingredients
Food Ingredients
Knowde for Suppliers
Browse
Sample
Chat
Request
Search
Products
Scott Bader
All Scott Bader
Search products
Matching Product Categories
CASE Ingredients
Composite Materials
Industrial Additives & Materials
Cosmetic Ingredients
Ready-to-Use Products
Markets
Certifications & Compliance
Labeling Claims
Physical Form
Regional Availability
All Filters
80 Products found on Scott Bader
Most Viewed
TDS
With TDS
Texipol 63-513
Product Families:
Rheology Modifiers & Stabilizers, Additives
Chemical Family:
Acrylics & Acrylates
End Uses:
Waterborne Adhesive, Waterborne Coating
Texipol 63-513 is a next generation inverse emulsion synthetic thickener based on a significant proportion of bio-derived content. It imparts pseudoplastic rheology to aqueous compositions and is supplied as a pre-neutralized dispersion, as the sodium salt of an acrylic based polymer. Texipol 63-513 shows broad pH compatibility.
Texicryl® 13-602
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
Compatible Substrates & Surfaces:
Wood
Glass Transition Temperature (Tg):
30.0 - 30.0 °C
Texicryl® 13-602 is a styrene acrylic copolymer emulsion designed for use in flexible fillers, caulks, sealant applications and architectural coatings. It enhances the workability and technical performance of many products. It meets all environmental demands, such as low VOC, APEO-free and formaldehyde-free with no compromise on quality and performance.
Texicryl® 13-812
Applications:
Bookbinding, Bookbinding Adhesives, Flexography
Product Families:
Acrylics, Functional Additives, Additives
Chemical Family:
Acrylics & Acrylates
End Uses:
Flexography Ink
Texicryl® 13-812 is an alkali swellable emulsion designed for water-based printing ink formulations. It has excellent rub resistance and transfer properties. It is designed for use in flexographic inks for corrugated board. It is also suitable as a pigment grinding medium and let down vehicle.
Texipol 63-510
Product Families:
Rheology Modifiers & Stabilizers, Additives
Chemical Family:
Acrylics & Acrylates
End Uses:
Waterborne Adhesive, Waterborne Coating
Texipol 63-510 is an inverse emulsion thickener that imparts a highly pseudoplastic rheology to aqueous based compositions. It is supplied as a pre-neutralized dispersion, as the sodium salt of an acrylic copolymer and shows thickening over a very wide pH range of 2 - 12.
Texipol 63-258
Product Families:
Rheology Modifiers & Stabilizers, Additives
Chemical Family:
Ammonium Salts
End Uses:
Waterborne Adhesive, Waterborne Coating
Texipol 63-258 is an inverse emulsion thickener that imparts a highly pseudoplastic rheology to aqueous based compositions. It is supplied as a pre-neutralized dispersion, as the ammonium salt of an acrylic copolymer.This product acts as a thickener for various aqueous based adhesive and coating systems. In particular it can be used to thicken anionic bituminous systems, shoe creams and textured coatings.
Texicryl® 13-601
Chemical Family:
Acrylics & Acrylates
End Uses:
Waterborne Coating, Top Coat
Glass Transition Temperature (Tg):
8.0 - 8.0 °C
Features:
Less Dirt Pick Up Potential, High Durability
Texicryl® 13-601 is a pure acrylic copolymer emulsion designed for use in both interior and exterior coating applications. It is designed for use in the formulation of solvent free decorative coatings with excellent durability and low dirt pick up. Other applications include artist’s colors and hobby paints.
Texicryl® 13-400
Applications:
Textile Manufacturing, Digital Printing, Printing & Inks
Product Families:
Finishing Additives & Treatments, Textile & Leather Chemicals
Chemical Family:
Acrylics & Acrylates
End Uses:
Textiles, Digital Ink
Texicryl® 13-400 is a formaldehyde free, cationic emulsion binder, specially designed for textile applications. It has been specially designed for textile applications using processes like pigment dyeing, mordant and printing. The product benefits are high crock-fastness, washing performance, excellent color yield and soft handle.
Texicryl® 13-318
Applications:
Decorative Paints, Coatings & Stains, Wood Coatings & Finishes, Decorative Paints
Product Families:
Surface Modifiers, Rheology Modifiers & Stabilizers, Additives
Chemical Family:
Alkali Swellable Emulsion (ASE) Thickener, Acrylics & Acrylates
End Uses:
Waterborne Coating
Texicryl® 13-318 is a hydrophobically modified alkali swellable emulsion designed for use as a rheology modifier in waterbased formulations. It is highly effective in modifying viscosities at low shear rates to avoid both settling and sagging. This emulsion can be used in cartidge products and construction adhesives.
Texicryl® 13-503
Chemical Family:
Styrene-Acrylic Copolymer, Acrylics & Acrylates
End Uses:
Waterborne Coating
Compatible Substrates & Surfaces:
Plastics, Polyethylene (PE), Polypropylene (PP)
Glass Transition Temperature (Tg):
-50.0 - -50.0 °C
Features:
High Gloss, Water Resistance, Abrasion Resistance, Reduces Rub-out
Texicryl® 13-503 is a styrene acrylic copolymer emulsion designed for the formulation of printing inks for application to non absorbent, low surface energy substrates. It is used in the formulation of printing inks for substrates such as polyethylene, polypropylene and various foils.
Texipol 63-237
Applications:
Textile Manufacturing, Leather & Textiles
Product Families:
Finishing Additives & Treatments, Rheology Modifiers & Stabilizers, Additives
End Uses:
Waterborne Adhesive, Textiles, Waterborne Coating
Texipol 63-237 is a multifunctional inverse emulsion thickener developed specifically for the pigment printing of textiles. It shows good all round performance with universal pigment and binder compatibility. It is supplied as a pre-neutralized dispersion as the ammonium salt of an acrylic copolymer.
Crestamould® B12
Chemical Family:
Polyesters
Product Type:
Foam Sealer, Sealer
Crestamould® B12R Sealer is a MEKP catalysed, brushable, slightly thixotropic sealer designed to coat expanded and extruded polystyrene foams. It acts as a chemical bridge and barrier between the polystyrene foam and either a laminate or a machinable polyester-based tooling paste such as Crestamould T27/T28. Its main use is for sealing of polystyrene foam blanks used in 5-axis plug and pattern work.
Texicryl® 13-217
Functions:
Binder, Binder & Resin
Chemical Family:
Acrylics & Acrylates
Compatible Substrates & Surfaces:
Textiles
Features:
Self Crosslinking, Excellent Water Wash Capabilities, Good Film Former
Texicryl® 13-217 is an APEO free self-crosslinking acrylic copolymer emulsion characterised by a soft film giving, after crosslinking, a high resistance to washing and to primed or printed fabrics. It is ideal for the manufacturing of non woven fabrics and as flocking adhesive by spraying, in full bath or by foaming.
Texicryl® 13-308
Functions:
Thickener, Rheology Modifier, Binder & Resin
Chemical Family:
Acrylics & Acrylates
End Uses:
Waterborne Coating
Physical Form:
Liquid, Dispersion, Emulsion
Texicryl® 13-308 is an alkali soluble emulsion designed as a thickener for water-based formulations. It can be used in the formulation of ceramic tile adhesives, paints, waterborne coating systems and for use in EN 12004-1and2: 2017 D1 CTAs, a wide range of building adhesives and highly filled coatings.
Texicryl® 13-809
Applications:
Bookbinding, Bookbinding Adhesives, Food & Beverage Packaging
Product Families:
Acrylics, Resins & Binders
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Waterborne Coating, Waterborne Ink, Other Ink Types
Texicryl® 13-809 is a styrene acrylic emulsion polymer designed for high gloss, water-based overprint varnishes and heat resistant inks. This styrene acrylic binder has been designed to provide superb clarity, water resistance, heat resistance, gloss etc. It can be used as deblocking modifier.
Texicryl® 13-074
Applications:
Sealants & Caulks, Other Building Materials, Floor Coatings
Product Families:
Acrylics, Finishing Additives & Treatments, Cement & Concrete Additives
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Paper & Pulp, Cement, Building Materials
Texicryl® 13-074 is an APEO free styrene acrylic copolymer emulsion which has been developed for use in mixes containing portland cement for flooring applications. It imparts a higher degree of flexibility and also acts as a soft binder used in fabric glue formulations for tissues and papers.
Crystic® Fireguard Gelcoat 70PA
Applications:
Rail & Mass Transit, Architectural Coatings, Industrial Coatings
Product Families:
Gelcoats & Topcoats, Surface Finishes
Crystic® Fireguard Gelcoat 70PA is our market leading halogen-free fire retardant gelcoat. It has been specifically designed for very stringent fire approvals particularly requiring low smoke characteristics. It achieves TS45545 HL2 with Crestapol 1212 and has low surface spread of flame. It can also be used with standard polyester fire retardant resins.
Texicryl® 13-824
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
Glass Transition Temperature (Tg):
66.0 - 66.0 °C
Features:
Excellent Adhesion
Texicryl® 13-824 is a styrene acrylic copolymer emulsion that can be coalesced to form a solvent and plasticiser resistant film. This hard non-film forming emulsion shows excellent adhesion to vinyl and non-absorbent susbstrates. It has been developed for the formulation of plasticiser resistant inks and is suitable for PVC flooring and wallpaper inks.
Texicryl® 13-691
Chemical Family:
Styrene-Acrylic Copolymer, Acrylics & Acrylates
End Uses:
Top Coat, Primer
Compatible Substrates & Surfaces:
Tile, Ceramic
Features:
Less Dirt Pick Up Potential, Water Resistance, Excellent Adhesion
Texicryl® 13-691 is an APEO free styrene acrylic copolymer emulsion designed for use in a variety of coating compounds and in a wide range of water-based paints and waterproofing compounds. Also used as a flexible water resistant binder for use in EN 12004:2001 D2 (class AA) ceramic tile adhesives and ceramic floor tile adhesives.
Texicryl® 13-819
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Other Ink Types, Waterborne Coating, Varnishes
Compatible Substrates & Surfaces:
Plastics
Glass Transition Temperature (Tg):
93.0 - 93.0 °C
Features:
Blocking Resistance, Heat Resistance, High Gloss
Texicryl® 13-819 is a styrene acrylate based vehicle designed for high gloss heat resistant overprint varnishes. It has been designed for use in hard polymers normally used in the formulating of overprint varnishes, and it can be blended into OPV’s to partially replace the hard polymer and enhance the gloss level. The product is free from APEO based surfactants.
Texicryl® 13-070
Applications:
Architectural Coatings, Interior Fixtures, Shingles & Tiles
Product Families:
Acrylics, Resins & Binders
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Tile Adhesive, Waterborne Coating
Texicryl® 13-070 is a styrene acrylic copolymer emulsion designed primarily as a binder for D1 ceramic tile adhesives. It has been designed to be formulated, with a wide range of filler types, into D1 tile adhesives. It acts as a binder for use in EN 12004-1and2: 2017 D1 CTAs, economic exterior and interior coatings, fence stains and flat paints.
Texicryl® 13-073
Applications:
Shingles & Tiles, Decorative Paints, Coatings & Stains, Construction Adhesives
Product Families:
Acrylics, Resins & Binders
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Tile Adhesive, Primer
Texicryl® 13-073 is a styrene acrylic copolymer emulsion, designed primarily for the production of flexible, water-resistant ceramic tile adhesives. This emulsion is especially suitable for floor tile adhesives and also used in the formulation of primer systems. It controls the porosity and aids adhesion to the base substrates.
Texicryl® 13-620
Applications:
Waterproofing & Weatherproofing, Decorative Paints, Coatings & Stains, Pavement, Highways, Roads & Bridges
Product Families:
Mortar & Gypsum Additives, Cement & Concrete Additives, Acrylics
Chemical Family:
Acrylics & Acrylates
End Uses:
Wall Putty, Cement, Building Materials
Texicryl® 13-620 is an APEO free pure acrylic copolymer emulsion designed for use in the building and construction industry. The polymer offers improved adhesion to various substrates and superior elasticity to relevant mixtures. It is designed for use in flexible mineral sealings, crack-bridging systems, waterproof coatings, fillers, putties, polymer-modified cement and mortar based mixtures of all kinds.
Texicryl® 13-013
Applications:
Waterproofing & Weatherproofing, Primers & Lacquers, Fillers, Levellers & Joints
Product Families:
Acrylics, Resins & Binders
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Lacquers, Primer
Texicryl® 13-013 is a styrene acrylic copolymer emulsion containing a plasticizer. The product gives excellent adhesion on substrates and even at low temperature, the flexibility is good. It is suitable for paints, sealants, acrylics, highly filled putties and soft fillers applications.
Texicryl® 13-616
Applications:
Decorative Paints, Coatings & Stains, Decorative Paints, Building Materials
Product Families:
Acrylics, Resins & Binders
Chemical Family:
Acrylics & Acrylates
Texicryl® 13-616 is a self crosslinking acrylic copolymer emulsion designed for use in high performance coatings. It is designed for use in high performance coatings with superior water, chemical and blocking resistance. It meets all environmental demands, such as low VOC, APEO-free and formaldehyde-free with no compromise on quality and performance.
Texicryl® 13-682
Applications:
Decorative Paints, Coatings & Stains, Architectural Coatings, Waterproofing & Weatherproofing
Product Families:
Acrylics, Resins & Binders
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Waterborne Coating
Texicryl® 13-682 is the APEO free Styrene Acrylic copolymer emulsion designed for use in high performance roof coating compounds and in a wide range of water-based paints. It is specifically recommended for the formulation of roof mastics and waterproofing compounds. It has exceptional water resistance after drying yet good water vapour transmission. Compounds made with Texicryl® 13-682 stand up to prolonged ponded water conditions.
Texicryl® 17-0330
Applications:
Decorative Paints, Coatings & Stains, Decorative Paints, Other Printing Applications
Product Families:
Acrylics, Resins & Binders
Chemical Family:
Acrylics & Acrylates, Styrene-Acrylic Copolymer
End Uses:
Waterborne Adhesive, Waterborne Coating, Top Coat
Texicryl® 17-0330 is a styrene acrylic copolymer emulsion designed for use in high performance adhesives, inks, and coatings where flexibility and/or cold temperature flexibility are desired. It can be utilized in a range of water based adhesives and emulsion paint formulations and can easily be formulated into coatings varying in properties from semi-gloss finish to high pigment volume concentration low-cost paints.
Crystic® Polyester Resin 272
Polymer Name:
Thermoset Polyester
Functions:
Surface Finish, Resins, Binders & Matrix Materials
Chemical Family:
Unsaturated Polyester (UPE), Isophthalics
Color:
Yellow
Processing Methods:
Hand Lay-up, Filament Winding, Pultrusion
Crystic® Polyester Resin 272 is an isophthalic polyester resin. It is recommended for use in high-performance applications using filament winding, pultrusion, and centrifugal or contact molding processes. The fully cured laminates have high mechanical strength and excellent strength retention in wet environments at temperatures up to 60ºC.
espol™ 19.00
Polymer Name:
Polyester (unspecified)
Reinforcement Material:
Glass Fibers
Chemical Family:
Unsaturated Polyester (UPE), Orthophthalics, Polyesters
Processing Methods:
Spray Lay-up, Resin Transfer Molding (RTM), Casting, Hand Lay-up
espol™ 19.00 is a non-accelerated orthophthalic polyester resin suitable for the resin transfer molding (RTM) process. It has been specifically formulated for non-critical and general-purpose applications where high reactivity is desirable. It is designed for laminates that need a very fast cure under closed-mold conditions.
Texipol 63-425
Applications:
Sports & Recreation
Product Families:
Rheology Modifiers & Stabilizers, Thermoset Resins, Additives
Chemical Family:
Acrylics & Acrylates
Polymer Name:
Thermoset Polyester
End Uses:
Waterborne Coating, Waterborne Adhesive
Texipol 63-425 is a next generation inverse emulsion synthetic thickener based on a significant proportion of bio-derived content. It shows broad pH compatibility and imparts pseudoplastic rheology to aqueous compositions and is supplied as a pre-neutralised dispersion as the sodium salt of an acrylic based polymer.
Texipol 63-400
Product Families:
Rheology Modifiers & Stabilizers, Thermoset Resins, Additives
Chemical Family:
Acrylics & Acrylates
Polymer Name:
Thermoset Polyester
End Uses:
Toys
Texipol 63-400 is an inverse emulsion thickener that imparts a pseudoplastic rheology to aqueous based compositions. It is supplied as a pre-neutralised dispersion as the sodium salt of an acrylic copolymer which gives almost instantaneous thickening when mixed directly into aqueous formulations.
Texipol 63-450
Applications:
Sports & Recreation
Product Families:
Rheology Modifiers & Stabilizers, Thermoset Resins, Additives
Chemical Family:
Acrylics & Acrylates
Polymer Name:
Thermoset Polyester
End Uses:
Waterborne Coating, Waterborne Adhesive
Texipol 63-450 is an inverse emulsion thickener that imparts a highly pseudoplastic rheology to aqueous based compositions. It is supplied as a pre-neutralised dispersion as the sodium salt of an acrylic copolymer and shows thickening over a very wide pH range of 2 - 12.
Crystic® Orthophthalic Spray Topcoat 408PA
Applications:
Glazing & Window Elements, Shingles & Tiles, Parking Structures & Stadiums
Product Families:
Gelcoats & Topcoats, Surface Finishes
Chemical Family:
Orthophthalics, Unsaturated Polyester (UPE)
End Uses:
Pipes, Tanks
Crystic® Orthophthalic Spray Topcoat 408PA White is a pre-accelerated flowcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. The product is pigmented using a highly UV resistant grade of titanium dioxide.
espol™ 26.00
Polymer Name:
Polyester (unspecified)
Reinforcement Material:
Glass Fibers
Chemical Family:
Polyesters, Unsaturated Polyester (UPE), Orthophthalics
Processing Methods:
Spray Lay-up, Pultrusion, Casting, Hand Lay-up, Continuous Lamination
End Uses:
Home Appliances, Channels, Ladders, Angles
espol™ 26.00 is a non-accelerated orthophthalic polyester resin that rapidly wets out reinforcements. It is formulated as a pultrusion grade, providing fast line speeds for products requiring high temperature exposure and a good finish. It can be used with all types of glass fibers, such as chopped strand mat, woven roving, and multi-axials. Typical applications include channels, angles, ladders, and special panels for appliances.
Texicryl® 13-314
Chemical Family:
Acrylics & Acrylates
Functions:
Rheology Modifier, Thickener
Physical Form:
Emulsion, Liquid
Texicryl® 13-314 is an acrylic copolymer emulsion designed for use as a thickener in aqueous-based systems. It can be hydrolyzed under alkaline conditions for this purpose. The product must be stored in the original, unopened, undamaged containers in a dry place at temperatures between 5°C and 30°C.
Crystic® Fireguard Gelcoat 72PA
Applications:
Rail & Mass Transit, Architectural Coatings, Industrial Coatings
Product Families:
Gelcoats & Topcoats, Surface Finishes
Crystic® Fireguard Gelcoat 72PA is a new technology spray fire retardant gelcoat which is halogen free. It has a number of fire approvals with different Crystic resin systems. This product has low surface spread of flame compared to competitive standard technology fire retardant gelcoats.
espol™ 12.23
Polymer Name:
Polyester (unspecified)
Chemical Family:
Polyesters, Unsaturated Polyester (UPE), Orthophthalics
Processing Methods:
Casting, Spray Lay-up, Hand Lay-up
espol™ 12.23 is a non-accelerated orthophthalic polyester resin that rapidly wets out reinforcements. It is a general-purpose resin specifically designed for non-critical and general-purpose applications. It is thixotropic by nature and has anti-sagging properties. It is designed for hand laminating, spray-up, and casting applications.
Show
36
of 80 results
1
2
3