Products

Produced using a disruptive innovation patented by SEPPIC, SEPIMAX ZEN™ is a next-generation thickening, stabilizing and texturizing powder polymer. It has a MAXimal resistance to electrolytes and can be used to formulate with greater creativity and peace of mind. SEPIMAX ZEN™ is the perfect polymer for building the “chassis” of formulations and addressing the challenge of stress-inducing and difficult active ingredients. It forms transparent gels with a velvety, rich and elegant feel. It is versatile and can be used in both skin care and hygiene products.

The pioneering SEPIGEL 305™ was the first multifunctional and liquid polymer in cosmetics produced by inverse emulsion polymerization. Pre-neutralized and effective over a wide pH range, SEPIGEL 305™ has revolutionized formulation habits. It is not only a thickening agent, but also an excellent stabilizer and texturizing agent. These properties have paved the way for new sensory benefits.

SIMULGEL™ EG is a liquid polymer produced by inverse emulsion polymerization. This is a solvent-free, energy efficient manufacturing process technology. SIMULGEL™ EG offers a perfect balance between softness and lightness for all types of application and climate.

SEPINOV™ EMT 10 is a universal thickening-stabilizing-texturizing powder polymer which imparts a satiny-fresh skin feel. Aqueous gels, cream gels, emulsions and GELTRAP™ can all be produced using SEPINOV™ EMT 10. SEPINOV™ EMT 10 demonstrates an excellent tolerance for immature skins and is therefore the perfect choice for baby products.

SEPIPLUS™ 400 is a liquid polymer produced by inverse emulsion polymerization. This is a solvent-free, energy efficient manufacturing process technology. In concentrated form, the transport of water can be reduced in comparison to standard (non-concentrated) grades.

SIMULGEL™ NS is a liquid polymer derived from the Ecodesign development intended to reduce environmental impact, one of SEPPIC’s three CSR pillars. It is a vegetable origin squalane-based thickening-stablizing-texturizing polymer. It contains 61% renewable carbon. Furthermore, it is synthesized by inverse emulsion polymerization. This is a solvent-free, energy efficient manufacturing process technology. Versatile and environmentally-friendly, SIMULGEL™ NS is used to develop formulas of any consistency, with a fresh and melting skin feel.

SOLAGUM™ AX is obtained using an innovative and sustainable manufacturing process for which the acacia gum coats the xanthan gum. The ratio of this combination has been optimized for an excellent balance between performance and texture. SOLAGUM™ AX is a natural thickening-stabilizing-texturizing polymer in the form of a non-dusty powder. It dissolves quickly in water to produce non-stringy and non-sticky aqueous gels. It is versatile and can be used in both skin care and hygiene products.

SIMULGEL™ SMS 88 is produced by inverse emulsion polymerization. This is a solvent-free, energy efficient manufacturing process technology. Based on new chemistry and with properties similar to SEPIGEL 305™, SIMULGEL™ SMS 88 imparts a soft texture and rich skin feel and leaves the skin with an infinite veil of softness.

SIMULGEL™ 600 is a liquid polymer produced by inverse emulsion polymerization. This is a solvent-free, energy efficient manufacturing process technology. Similar to SEPIGEL 305™ in terms of application properties, SIMULGEL™ 600 can be used to formulate soft and smooth textures.

SOLAGUM™ TARA is a 100% natural gum in powder form. This non-ionic polysaccharide hydrates instantly in water and can be used hot or cold. Recommended for medium or thick consistency formulations, it is ideal for “chassis” formulas due to its high resistance to electrolytes. It also acts as a texturizing agent by providing a structuring effect and a very soft feel. It is versatile and can be used in both skin care and hygiene products.

SEPINOV™ WEO is a polymer derived from the Ecodesign development intended to reduce environmental impact, one of SEPPIC’s three CSR pillars. It is a universal, EO (ethylene oxide)-free, thickening-stabilizing-texturizing polymer. In the form of a concentrated powder, it has good resistance to electrolytes and imparts a light, satin-like skin feel.

SEPIPLUS™ S is a liquid polymer produced by inverse emulsion polymerization. This is a solvent-free, energy efficient manufacturing process technology. In concentrated form, the transport of water can be reduced in comparison to standard (non-concentrated) grades. Ultra-versatile in the formulation process, SEPIPLUS™ S offers excellent resistance to electrolytes. It can be used to formulate soft and rich textures that impart absolute comfort to the skin.

SEPILIFE™ NUDE is a new generation of ecodesigned and patented emulsifying polymer combining sustainability, performance and skin feel. It allows formulation of finished products with high percentage of naturality (ISO 16128) and good biodegradability. EO (ethylene oxide)-free, multifunctional and easy to use with cold process, it provides THE solution to formulate efficiently and more sustainably. SEPILIFE™ NUDE imparts an ultra light & nude skin feel with quick-break effect and natural finish.

SEPIPLUS™ 265 is a liquid polymer produced by inverse emulsion polymerization. This is a solvent-free, energy efficient manufacturing process technology. In concentrated form, the transport of water can be reduced in comparison to standard (non-concentrated) grades. Effective at low doses, SEPIPLUS™ 265 has a good resistance to electrolytes. It imparts a glide-on spreading and a velvet finish.

SIMULGEL™ EPG is a polymer derived from the Ecodesign development intended to reduce environmental impact, one of SEPPIC’s three CSR pillars. It is an EO (ethylene oxide)-free, thickening-stablizing-texturizing polymer. Furthermore, it is synthesized by inverse emulsion polymerization. This is a solvent-free, energy efficient manufacturing process technology. Suitable for more responsible concepts, SIMULGEL™ EPG imparts a soft and light skin feel.

MONTANE™ products are derived from monoester, sesquiester or triester of the following acids: lauric, palmitic, stearic, isostearic and oleic. MONTANE™ emulsifiers are low colored products, with a faint odor and low impurities content. The MONTANE™ grades have an HLB (Hydrophilic / Lipophilic Balance) range from 1.8 to 8.6. They are compatible with all surfactants and with electrolytes. They are not sensitive to pH variation.

SIMULQUAT™ HC 305 is produced by inverse emulsion polymerization. This is a solvent-free, energy efficient manufacturing process technology. A pre-neutralized, cold processable, cationic and liquid polymer, SIMULQUAT™ HC 305 has stabilizing and thickening properties and brings a silicone-like feel to formulations. It is ideal for hair formulations such as conditioners and treatments.

SIMULGEL™ FL is a liquid polymer ideal for fluid emulsions with a stabilizing effect at low levels. It has reproducible viscosoties, has soft, fresh, and light skin feel sensory profile. It can be used in cold process.

SIMULGEL™ I-NS 100 is a liquid polymer produced by inverse emulsion polymerization. This is a solvent-free, energy efficient manufacturing process technology. Versatile and efficient, SIMULGEL™ I-NS 100 is used to develop from sprayable, extra-liquid to very thick formulas. It creates melting textures with a fresh skin feel.

SEPIMAT SB is a versatile texturizing agent suitable for all types of formulations. Made up of solid spheres with smooth surface, it gives to the skin a soft and powdery skin feel with matte finish.

Alariane is a water soluble brown algae extract. This product protects the hair fibers from external aggressions coming from weather or different stresses (pollution, UV rays) that people encounter on a daily basis while the combination of amino acids found in Alariane AD also mimic the composition of keratin. This helps reinforce the hair, helping to straighten the hair.

SEA LAVENDER HC® is a water soluble marine plant extract based off of Limonium gerbera. Sea Lavender HC protects the capillary shaft of the hair from damage caused by weather or external stresses which make the hair dry and brittle. Hair treated with Sea Lavender HC is less reactivity to static electricity.

SEPIPLUS™ K is a rheological modifier which combines clean, performing and sensorial assets. SEPIPLUS™ K is solvent, preservative and EO (ethylene oxide)-free, which is suitable for clean cosmetics. It provides high performance in terms of thickening, oil stabilizing and resistance to electrolytes. It imparts a silicone-like gliding skin feel and adds a graceful touch to the formulation.