Products

SPP-25 is a low molecular weight polypropylene texturing agent. The SPP Series consists of polypropylene powders in a controlled range of particle sizes. These products are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based inks & coatings.

Hydrocer 257 is a stable, non-ionic aqueous synthetic wax dispersion.

Shamrock SST-3 Tan is a micronized, tan PTFE powder.

S-396 N1 is a finely ground, crystalline grade of polyethylene wax with a high melt point and good solvent resistance.

HydroCER 584 is a 35% aqueous dispersion of high molecular weight polyethylene wax. The HydroCER products are wax emulsions, dispersions, or a combination of these.

HydroCER EC-36 is a 35% APEO-free carnauba wax emulsion in a stable anionic surfactant system. The HydroCER products are wax emulsions, dispersions, or a combination of these.

SST®-2 is a white low MW PTFE micropowder with particle size distribution at a mean value of 8 µm. SST®-2 products are Shamrock’s PTFE micropowders that are defined by particle size and distribution, molecular weight, crystallinity, surface area, oil adsorption, powder flow, and color. Made primarily from highly controlled recycled PTFE feedstocks, SST® products are used for their ability to produce slip, nonstick, water repellency, texture, release, rub, and abrasion resistance to surfaces.

HydroCER 795 is a 52% aqueous dispersion of an oxidized polyethylene wax. The HydroCER products are wax emulsions, dispersions, or a combination of these.

CeraSPERSE 171 is a synthetic wax compounded in refined linseed oil. Shamrock’s CeraSPERSE products are manufactured using a controlled crystallization process that allows the production of 1 micron wax dispersions. These wax compounds have a translucent appearance with a shiny gloss and a creamy feel. In addition to our standard products, Shamrock can develop and produce a wide range of compounds on a make-to-order basis.

CeraSPERSE 31 is carnauba wax compounded in Butyl Carbitol (Diethylene glycol monobutyl ether). This slow-evaporating, hydrophilic glycol ether provides compatibility with both polar and non-polar systems. Shamrock’s CeraSPERSE products are manufactured using a controlled crystallization process that allows the production of 1 micron wax dispersions. These wax compounds have a translucent appearance with a shiny gloss and a creamy feel. In addition to our standard products, Shamrock can develop and produce a wide range of compounds on a make-to-order basis.

AquaFLON® 60 is a self-stable 60% Polytetrafluoroethylene (PTFE) dispersion in water. The AquaFLON® product line is comprised of aqueous dispersions of PTFE or PTFE with wax. These products are designed for stability, pourability and easy incorporation into water-based systems. They are used as additives to provide slip and abrasion resistance.

S-381-N1 is a micronized synthetic and natural wax alloy that has a uniform melting range peaking at 91°C. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

HydroCER 605 is a 50% active blend of high molecular weight polyethylene (PE) and polytetrafluoroethylene (PTFE) dispersed in water.

SST®-5S is a 3 µm polytetrafluoroethylene (PTFE) micropowder with a tightly controlled particle size distribution. SST®-5S provides optimum rub and slip performance for thin-film applications. SST® products are Shamrock’s PTFE micro powders that are defined by particle size and distribution, molecular weight, crystallinity, surface area, oil adsorption, powder flow, and color. Made primarily from highly controlled recycled PTFE feedstocks, SST® products are used for their ability to provide slip, non-stick, water repellency, texture, release, rub, and abrasion resistance to surfaces.

Hydrocer D-336 is a blend of an anionic aqueous paraffin wax emulsion and synthetic wax that has been oxidized to provide water wettablility.

SPP-40 is a low molecular weight polypropylene texturing agent.

S-381-N5 is a modified, micronized blend of natural and synthetic wax that has a uniform melting range peaking at 91°C. Shamrock's product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

S-379-H is a synthetic wax with a DSC peak melt around 100°C and corresponding low onset of melting. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

NonSKID 8001 is a combination of micronized polypropylene and PTFE. Shamrock’s NonSKID micropowders provide resistance to sliding forces.

S-395-SP5 is a synthetic wax with a DSC melt peak above 120°C, good crystallinity, and the high onset of melt. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

S-394-N1 is a synthetic wax with a DSC melt peak above 110°C and good onset of melting. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes

FluoroSLIP® 893-A is a stir-in powder blend of spherical micronized polyethylene (PE) and polytetrafluoroethylene (PTFE).

S-394 N5 is a polyethylene wax powder with narrow melt point temperature range and reduced solubility or use in a wide range of inks and coatings. It has a fairly high melt point, with a softening point only a few degrees lower.

S-395-N2 is a synthetic wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

CeraSPERSE 174 is synthetic wax and polytetrafluoroethylene (PTFE) compounded in refined linseed oil. Shamrock’s CeraSPERSE products are manufactured using a controlled crystallization process that allows the production of 1 micron wax dispersions. These wax compounds have a translucent appearance with a shiny gloss and a creamy feel. In addition to our standard products, Shamrock can develop and produce a wide range of compounds on a make-to-order basis.

S-156 is a micronized modified polyethylene wax powder used to provide rub, abrasion, and mar resistance with matting effect. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, and controlled slip in a range of particle sizes.

S-379-N8 is a synthetic wax with a DSC peak melt above 100°C and corresponding low onset of melting. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

HydroCER 7410 is a 45% aqueous dispersion of medium molecular weight polyethylene wax. The HydroCER products are wax emulsions, dispersions, or a combination of these.

S-483 is a spherical synthetic wax with a DSC melt peak above 110°C. It has good onset of melting and low crystallinity. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

S-400-Q is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 108 – 146°C. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

S-400-N5 is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 99 – 147°C. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

SST®-1MG is a friable grade of PTFE powder which can be reduced to an average particle size of 1 – 2 microns.

AquaFLON® 178G is a stable aqueous dispersion of a blend of a synthetic wax and polytetrafluoroethylene (PTFE). The AquaFLON® product line is comprised of aqueous dispersions of PTFE or PTFE with wax. These products are designed for stability, pourability and easy incorporation into water-based systems. They are used as additives to provide slip and abrasion resistance.

S-363 is a synthetic wax alloy showing melting peaks ranging from 92 – 141°C. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

SST®-4P is an off-white to light gray low MW PTFE powder with a particle size mean value of 3 µm.

SST®-4D is a white low MW PTFE powder with a particle size mean value of 3 µm. SST®-4D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST® products are Shamrock’s PTFE micropowders that are defined by particle size and distribution, molecular weight, crystallinity, surface area, oil adsorption, powder flow, and color. Made primarily from highly controlled recycled PTFE feedstocks, SST® products are used for their ability to provide slip, non-stick, water repellency, texture, release, rub, and abrasion resistance to surfaces.