FluoroSLIP® 731 MG

1 of 14 products in this brand
FluoroSLIP® 731 MG is a combination of a high melting synthetic wax, carnauba wax, and polytetrafluoroethylene (PTFE) where the wax blend shows a melting peaks ranging from 84 – 110°C.

Functions: Anti-Abrasion Agent, Slip Agent

End Uses: Radiation Curable Ink, Solventborne Ink, Waterborne Ink

Technical Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

CASE Ingredients Functions
Technologies

Features & Benefits

Product Highlights
  • Slip (Low COF)
  • Rub Resistance
  • Abrasion Resistance
  • Mar/Scuff
  • Gloss Clarity
  • Release Properties Block Resistance 

Applications & Uses

Cure Method
Use Level
1 - 2%
Recommended Uses & Known Applications

FluoroSLIP® 731 MG is recommended for thin film water-based, solvent-based and UV systems at 1- 2% of the total formula weight. It is especially recommended for can coatings.

Properties

Typical Properties
ValueUnitsTest Method / Conditions
Hegman Grindmin. 6.5
Melting Point (Synthetic Wax)232 / 111˚F / ˚C
NPIRI Grindmax. 2
Particle Size Mean Value5.0μm
Particle Size Under (at 99%)12.0μm
Specific Gravity1.1g/cm³

Regulatory & Compliance

Regulatory Status

The components of this product are listed on multiple chemical inventories. For specific information on the applicable chemical inventories, please refer to the product SDS. This product meets the requirements of 21 CFR 175.105, 175.300, 176.170, and 176.180.