Products

FluoroSPERSE® 153V is a dispersion of polytetrafluoroethylene (PTFE) micropowder in a universal lithographic system. They assure good wetting, uniform composition, and avoid the handling of powder. They are available in a range of printing ink vehicles, solvents, and in combination with wax.

Hydrocer 7112 is a stable, aqueous synthetic wax dispersion. Keep the lid tight on the container to avoid separation. If this product has separated, simple mixing with paddle or propeller mixer is all that will be required. The Hydrocer products are wax emulsions, dispersions, or a combination of these.

S-375 is a synthetic wax with a DSC peak melt around 100°C and the corresponding low onset of melting. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

TexMATTE 6017 is a cross-linked polymethyl methacrylate product. Shamrock’s Texture Series consists of polyethylene, polypropylene, polytetrafluoroethylene (PTFE), and PMMA (Texture-W, SPP, FluoroTEX, TexMATTE) powders in a controlled range of particle sizes. These stir in powders provide a unique feel and texture allowing for customized surface finishes.

TexMATTE 6005 is a cross-linked polymethyl methacrylate product.

S-395-N5 is a synthetic wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

SPP-300 is a low molecular weight polypropylene texturing agent. The SPP Series consists of polypropylene powders in a controlled range of particle sizes. These products are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based inks & coatings.

S-400-N1 is micronized EBS (ethylene bisstearamide) wax powder showing melting peaks ranging from 99 – 147°C. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

FluoroSPERSE® 7908 is dark colored dispersion of polytetrafluoroethylene (PTFE) micropowder in a general use lithographic varnish. They assure good wetting, uniform composition, and avoid the handling of powder. They are available in a range of printing ink vehicles, solvents, and in combination with wax.

PowderTEX 94 is a pure polytetrafluoroethylene (PTFE) developed as a texturing agent for powder coatings.

CeraSPERSE 174 is synthetic wax and polytetrafluoroethylene (PTFE) compounded in refined linseed oil. Shamrock’s CeraSPERSE products are manufactured using a controlled crystallization process that allows the production of 1 micron wax dispersions. These wax compounds have a translucent appearance with a shiny gloss and a creamy feel. In addition to our standard products, Shamrock can develop and produce a wide range of compounds on a make-to-order basis.

S-395-N2 is a synthetic wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

S-395-SP5 is a synthetic wax with a DSC melt peak above 120°C, good crystallinity, and the high onset of melt. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

Neptune 1-N1 is a medium MW synthetic wax treated to provide water wettability. Neptune 1-N1 is used in water-based inks and coatings. Neptune 1-N1 is used in both air dry and baked coatings.

CeraSPERSE 321BG is a compound of waxes and PTFE in Butyl Carbitol (Diethylene glycol monobutyl ether). This slow-evaporating, hydrophilic glycol ether provides improved compatibility with both polar and non-polar systems. Shamrock’s CeraSPERSE products are manufactured using a controlled crystallization process that allows the production of 1 micron wax dispersions. These wax compounds have a translucent appearance with a shiny gloss and a creamy feel. In addition to our standard products, Shamrock can develop and produce a wide range of compounds on a make-to-order basis.

S-394-N1 is a synthetic wax with a DSC melt peak above 110°C and good onset of melting. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes

FluoroSLIP® 893-A is a stir-in powder blend of spherical micronized polyethylene (PE) and polytetrafluoroethylene (PTFE).

NonSKID 8001 is a combination of micronized polypropylene and PTFE. Shamrock’s NonSKID micropowders provide resistance to sliding forces.

SST®-1MG is a friable grade of PTFE powder which can be reduced to an average particle size of 1 – 2 microns.

FluoroSLIP® 731 MG is a combination of a high melting synthetic wax, carnauba wax, and polytetrafluoroethylene (PTFE) where the wax blend shows a melting peaks ranging from 84 – 110°C.

S-379-H is a synthetic wax with a DSC peak melt around 100°C and corresponding low onset of melting. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

FluoroSLIP® 605 is a combination of spherical synthetic wax and PTFE.

Hydrocer D-336 is a blend of an anionic aqueous paraffin wax emulsion and synthetic wax that has been oxidized to provide water wettablility.

S-381-N5 is a modified, micronized blend of natural and synthetic wax that has a uniform melting range peaking at 91°C. Shamrock's product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

SPP-40 is a low molecular weight polypropylene texturing agent.

TexMATTE 6030 is a cross-linked polymethyl methacrylate product. Shamrock’s Texture Series consists of polyethylene, polypropylene, polytetrafluoroethylene (PTFE), and PMMA (Texture-W, SPP, FluoroTEX, TexMATTE) powders in a controlled range of particle sizes. These stir in powders provide a unique feel and texture allowing for customized surface finishes.

SST®-3P is an off-white to light gray low MW PTFE powder with a particle size mean value of 5 µm. SST® products are Shamrock’s PTFE micro powders that are defined by particle size and distribution, molecular weight, crystallinity, surface area, oil adsorption, powder flow, and color. Made primarily from highly controlled recycled PTFE feedstocks, SST® products are used for their ability to provide slip, non- stick, water repellency, texture, release, rub, and abrasion resistance to surfaces.

S-394 MG is a fine particle size, polyethylene wax powder. S-394-MG is a synthetic wax with a DSC melt peak above 110°C. S-394 MG provides excellent rub/abrasion resistance to liquid inks, paste inks and thin-film coatings.

AquaFLON® 52 is a nonionic aqueous dispersion of polytetrafluoroethylene (PTFE). The AquaFLON® product line is comprised of aqueous dispersions of PTFE or PTFE with wax. These products are designed for stability, pourability and easy incorporation into water-based systems. They are used as additives to provide slip and abrasion resistance.

NanoFLON® Series powders are Natural Prime PTFE micropowder with various agglomerated particle sizes. NanoFLON® makes it easier to add key fluoropolymer properties to your product, including slip, abrasion resistance and release. The ultra-fine powders are engineered using our own proprietary process that allows easy dispersion and primary particle sizes as small as 200 nanometers

HydroCER 605 is a 50% active blend of high molecular weight polyethylene (PE) and polytetrafluoroethylene (PTFE) dispersed in water.

S-400-N5 is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 99 – 147°C. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

S-NAUBA 5021 is a concentrated blend of carnauba and synthetic wax showing melting peaks ranging from 84 – 110°C. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

Neptune 5223 is a synthetic wax that has been oxidized to provide water wettability and has a uniform melting range peaking at 97°C.

FluoroSLIP® 511 is a blend of high melting synthetic wax and PTFE.

AquaFLON® MG is an aqueous dispersion of polytetrafluoroethylene (PTFE) and carnauba wax. The AquaFLON® product line is comprised of aqueous dispersions of PTFE or PTFE with wax. These products are designed for stability, pourability and easy incorporation into water-based systems. They are used as additives to provide slip and abrasion resistance.