Products

SPP-25 is a low molecular weight polypropylene texturing agent. The SPP Series consists of polypropylene powders in a controlled range of particle sizes. These products are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based inks & coatings.

S-396 N1 is a finely ground, crystalline grade of polyethylene wax with a high melt point and good solvent resistance.

HydroCER 795 is a 52% aqueous dispersion of an oxidized polyethylene wax. The HydroCER products are wax emulsions, dispersions, or a combination of these.

NonSKID 5389 is a micronized, modified polypropylene wax. Shamrock’s NonSKID micropowders provide resistance to sliding forces. NonSKID 5389 is used in air dry, baked, and radiation coatings for aqueous, solvent, UV, and powder systems at 3-5% of total formula weight.

NonSKID 59 is a micronized, modified polypropylene wax. Shamrock's NonSKID micropowders provide resistance to sliding forces.

SPP-40 is a low molecular weight polypropylene texturing agent.

Neptune 250SD is a finely micronized spherical oxidized polyethylene wax. Neptune 250-SD is recommended for use in liquid ink and coating formulations, including water-based, solvent-based, and UV systems for packaging and gravure inks, general industrial, furniture and floor coatings.

S-394 N5 is a polyethylene wax powder with narrow melt point temperature range and reduced solubility or use in a wide range of inks and coatings. It has a fairly high melt point, with a softening point only a few degrees lower.

S-394 MG is a fine particle size, polyethylene wax powder. S-394-MG is a synthetic wax with a DSC melt peak above 110°C. S-394 MG provides excellent rub/abrasion resistance to liquid inks, paste inks and thin-film coatings.

S-156 is a micronized modified polyethylene wax powder used to provide rub, abrasion, and mar resistance with matting effect. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, and controlled slip in a range of particle sizes.

HydroCER 7410 is a 45% aqueous dispersion of medium molecular weight polyethylene wax. The HydroCER products are wax emulsions, dispersions, or a combination of these.

SPP-10 is a low molecular weight polypropylene texturing agent. The SPP Series consists of polypropylene powders in a controlled range of particle sizes. These products are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based inks & coatings.

S-368-N5T is a stable water dispersible grade of synthetic wax showing melting peaks ranging from 93 – 106°C. S-368 N5T imparts lubricity, abrasion resistance and anti-blocking properties to aqueous-based systems. It also has been used successfully in laminating adhesives to improve die-cutting performance.

SPP-300 is a low molecular weight polypropylene texturing agent. The SPP Series consists of polypropylene powders in a controlled range of particle sizes. These products are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based inks & coatings.

S-232 MG is a micronized polyethylene-carnauba wax alloy. S-232 also is available in N1, N5 and SD3 grades.

The SPP Series consists of polypropylene powders in a controlled range of particle sizes. These products are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based inks & coatings.