Products

S-396 N1 is a finely ground, crystalline grade of polyethylene wax with a high melt point and good solvent resistance.

HydroCER EC-36 is a 35% APEO-free carnauba wax emulsion in a stable anionic surfactant system. The HydroCER products are wax emulsions, dispersions, or a combination of these.

HydroCER 795 is a 52% aqueous dispersion of an oxidized polyethylene wax. The HydroCER products are wax emulsions, dispersions, or a combination of these.

NonSKID 59 is a micronized, modified polypropylene wax. Shamrock's NonSKID micropowders provide resistance to sliding forces.

NonSKID 5389 is a micronized, modified polypropylene wax. Shamrock’s NonSKID micropowders provide resistance to sliding forces. NonSKID 5389 is used in air dry, baked, and radiation coatings for aqueous, solvent, UV, and powder systems at 3-5% of total formula weight.

Neptune 250SD is a finely micronized spherical oxidized polyethylene wax. Neptune 250-SD is recommended for use in liquid ink and coating formulations, including water-based, solvent-based, and UV systems for packaging and gravure inks, general industrial, furniture and floor coatings.

S-394 N5 is a polyethylene wax powder with narrow melt point temperature range and reduced solubility or use in a wide range of inks and coatings. It has a fairly high melt point, with a softening point only a few degrees lower.

S-156 is a micronized modified polyethylene wax powder used to provide rub, abrasion, and mar resistance with matting effect. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, and controlled slip in a range of particle sizes.

S-394 MG is a fine particle size, polyethylene wax powder. S-394-MG is a synthetic wax with a DSC melt peak above 110°C. S-394 MG provides excellent rub/abrasion resistance to liquid inks, paste inks and thin-film coatings.

HydroCER 7410 is a 45% aqueous dispersion of medium molecular weight polyethylene wax. The HydroCER products are wax emulsions, dispersions, or a combination of these.

S-368-N5T is a stable water dispersible grade of synthetic wax showing melting peaks ranging from 93 – 106°C. S-368 N5T imparts lubricity, abrasion resistance and anti-blocking properties to aqueous-based systems. It also has been used successfully in laminating adhesives to improve die-cutting performance.

S-232 MG is a micronized polyethylene-carnauba wax alloy. S-232 also is available in N1, N5 and SD3 grades.

S-NAUBA 5021 is a concentrated blend of carnauba and synthetic wax showing melting peaks ranging from 84 – 110°C. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

S-400 HQ is a micronized ethylene-bis-stearamide (EBS) wax powder. Shamrock’s S-products are micronized waxes that provide rub and abrasion resistance. Included in this line are products that provide controlled slip, gloss reduction, matting, and clarity in a range of particle sizes.

S-256-N1 is a carnauba and synthetic wax alloy showing melting peaks ranging from 95 – 113°C. Shamrock’s product line of micronized waxes provide rub and abrasion resistance.

S-400-Q is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 108 – 146°C. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

S-400-N5 is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 99 – 147°C. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

Super Taber 5509 SP5 is a combination of polytetrafluoroethylene and selected polyethylene waxes with a large average particle size for use in thick film applications.

Super Taber 5509 N1 by Shamrock Technologies Inc. is commonly used as Slip Agent for a variety of applications in Industrial. Typical use levels recommended for Super Taber 5509 N1: 1.0 - 3.0%. It is available in Powder form.

Taber Plus 75 is a synthetic wax blend that has components showing melting peaks ranging from 83 – 125°C.