Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Composite Materials Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Product Highlights
- Resin Transfert Molding (RTM, VARTM)
- Pressure Molding
Applications & Uses
- Markets
- Composites End Use
- Composites Processing Methods
- Processing Conditions
- We recommend that the components are weighed with an accurate balance to prevent mixing inaccuracies which can affect the properties of the matrix system. The components should be mixed thoroughly to ensure homogeneity. It is important that the side and the bottom of the vessel are incorporated into the mixing process.
- When processing large quantity of mixture the pot life will decrease due to exothermic reaction. It is advisable to divide large mixes into several smaller containers.
Properties
- Color
- Component A
- Mechanical Properties
- Typical Properties
- Component B
Value | Units | Test Method / Conditions | |
Mix ratio by weight | 100 | — | — |
Mix ratio by volume at 25°C | 100 | — | — |
Aspect | Liquid | — | — |
Viscosity at 25°C | 1700 | mPa.s | BROOKFIELD LVT |
Specific Gravity at 25°C | 1.16 | g/cm³ | ISO 1675: 1985 |
Value | Units | Test Method / Conditions | |
Tensile modulus at 23°C | 3400 | MPa | ISO 527-2: 1993 |
Tensile Strength at 23°C | 72 | MPa | ISO 527-2: 1993 |
Elongation at Break at 23°C | 4 | % | ISO 527-2: 1993 |
Flexural Modulus at 23°C | 2600 | MPa | ISO 178: 2001 |
Flexural Strength at 23°C | 110 | MPa | ISO 178: 2001 |
Value | Units | Test Method / Conditions | |
Aspect | Liquid | — | — |
Viscosity at 25°C | 320 | mPa.s | BROOKFIELD LVT |
Specific Gravity at 25°C | 1.12 | g/cm³ | ISO 1675: 1985 |
Gel time on 100 ml at 25°C | min. 45 | — | Gel Timer TECAM |
Gel time at 80°C | 9 – 10 | — | ISO 8130-6: 1992 (Hot plate) |
Gel time at 100°C | 3.0 – 3.5 | — | ISO 8130-6: 1992 (Hot plate) |
Gel time at 120°C | 1.0 – 1.5 | — | ISO 8130-6: 1992 (Hot plate) |
Gel time at 150°C | 24 – 28 | — | ISO 8130-6: 1992 (Hot plate) |
Gel time at 170°C | 17 – 19 | — | ISO 8130-6: 1992 (Hot plate) |
Gel time at 170°C | 10-12 | — | ISO 8130-6: 1992 (Hot plate) |
Value | Units | Test Method / Conditions | |
Aspect | Liquid | — | — |
Mix ratio by weight | 21 | — | — |
Mix ratio by volume at 25°C | 26 | — | — |
Viscosity at 25°C | 10 | mPa.s | BROOKFIELD LVT |
Specific Gravity at 25°C | 0.95 | g/cm³ | ISO 1675: 1985 |
Storage & Handling
- Handling
Normal health and safety precautions should be observed when handling these products
- Ensure good ventilation
- Wear gloves, safety glasses and waterproof clothes.
- Storage Conditions
Shelf life of resin part is 24 months and 12 months for the hardener part in a dry place and in their original unopened containers at a temperature between 5 and 40°C. See expiry date on original container. Partly emptied containers should be closed immediately after use.