Products

Sika RSF 816 G can be combined with natural fibers and fabrics such as flax, hemp or cellulose based materials fo greener composite solutions.

Biresin® CR122 is a medium viscosity epoxy resin system suitable for the production of high performance fiber reinforced composites with a thermal performance up to 120°C.

Biresin® CR80 is a low viscosity epoxy resin system suitable for the production of high performance fiber reinforced composites parts and molds with thermal properties up to 80°C.

EPOLAM 2020 is a Variable reactivity by addition of an accelerator Tg ~80°C

Biresin® CR134 FR is a fi lled epoxy resin system suitable for the production of fi re resistant high performance fi bre reinforced composites with thermal properties up to 130°C. When used with carbon fi bre reinforcement Biresin® CR134 FR allows the fabric structure to be seen.

Biresin® CR83 is an epoxy resin system with extremely low viscosity designed specifi cally for the infusion process for the production of high performance fiber reinforced composites parts and molds. The system has thermal properties up to 80°C. Biresin® CR83 epoxy resin has a low tendency to crystallize.

Biresin® CR131 is an epoxy resin system suitable for the production of high performance fiber reinforced composites parts and molds with thermal properties up to 130°C.

EPOLAM 8064 is a Low viscosity amine-cured laminating epoxy system showing excellent flexibility and high reactivity.

Biresin® CR201 is a three component, anhydride cured, low viscosity epoxy resin system suitable for the production of high performance fi bre reinforced composites with outstanding heat resistance.

Biresin® CR144 is a three component, anhydride cured, low viscosity epoxy resin system suitable for the production of high performance fi bre reinforced composites.

Biresin® CH135 is an epoxy resin system suitable for the production by Resin Transfer Molding of high performance fi bre reinforced composites with thermal properties up to 150°C.

Biresin® CR132 FR is a fi lled epoxy resin system suitable for the production of fi re resistant high performance fiber reinforced composites with thermal properties up to 150°C.

Biresin® CR120 is a low viscosity epoxy resin system suitable for the production of high performance fiber reinforced composites with thermal performance up to 120°C

Good properties of impregnation and bonding of wood. Germanischer Lloyd approved for EPOLAM 2017 and 2018 hardeners Tg ~80°C.

Biresin® CR82 is an epoxy resin system designed for the hand lay-up, vacuum bagging and filament-winding processes, especially for applications where curing temperatures of ≥ 75 °C cannot be implemented.

Epolam 2080 is MDA free. Production of composite structures by the usual impregnation methods (contact, under vacuum...).Used in concrete by addition of aluminum fillers or other ones.

The Biresin® CR84 system is a lightly thickened epoxy resin system having a pot-life up-to 10 hours and a reduced tendency to drip or spray from reinforcing fibers during processing. The resin system can be fully cured at 80°C.

Biresin® CR132 is an epoxy resin system suitable for the production of high performance fiber reinforced composite parts and molds with thermal properties up to 130°C

EPOLAM 2500 meets the requirements of AIRBUS HELICOPTERS specifications ECS 2196 Rev.B for interior fittings manufacture and repair.

Biresin® CR141 is a three component, anhydride cured, low viscosity epoxy resin system suitable for the production of high performance fi bre reinforced composites.

EPOLAM 2022 is a Variable reactivity by addition of an accelerator Tg ~80°C

Biresin® CR172 is an epoxy resin system designed for the hand lay-up process and injection processes and is especially for applications when a very high thermal resistance is needed.

Biresin® CR170 resin cured with Biresin® CH170-3 hardener (B) is an epoxy resin system suitable for the production of high performance fi bre reinforced components by the RTM process, especially where high thermal performance, up to 180°C, is required.

Epolam 2092 is MDA free. Production of composite tooling and structures by the usual impregnation methods (infusion, wet-lay-up).