Company logo

Products

Sipchem
Plastics
Product Families
Basic Thermoplastics
18 products found on Sipchem in Plastics .
With SDS
With TDS
Sipchem Eva 0818 Lo-interim product card banner

Sipchem

Sipchem EVA 0818 LO-Interim

Polymer Name: Ethylene Vinyl Acetate Copolymer (EVA)

Processing Methods: Coextrusion, Film Extrusion, Extrusion

Additives Included: Heat Stabilizer

End Uses: Flexible Packaging, Stretch Films, Cosmetic Packaging, Film

Sipchem EVA 0818 LO is a 18% ethylene vinyl acetate copolymer resin, designed for film applications. EVA 0818 LO exhibits high transparency, good mechanical properties and low gel level. It is manufactured by IPC, an affiliate of Sipchem in The Kingdom of Saudi Arabia using an Exxon Mobil high pressure tubular process.

Sipchem Eva 3522 Co product card banner

Sipchem

Sipchem EVA 3522 CO

Polymer Name: Ethylene Vinyl Acetate Copolymer (EVA)

Processing Methods: Extrusion, Profile Extrusion, Compounding

Sipchem EVA 3522 CO is a 22% ethylene vinyl acetate copolymer resin, manufactured by IPC an affiliate of Sipchem in The Kingdom of Saudi Arabia using an Exxon-Mobil high-pressure tubular process. EVA 3522 CO is designed for specialty extrusion and compounding applications. Articles made from EVA 3522 CO are soft and have excellent low temperature toughness.

Sipchem Sahara H 250 Ff product card banner

Sipchem

Sipchem Sahara H 250 FF

Polymer Name: Polypropylene Homopolymer (HPP)

Processing Methods: Extrusion

Melt Flow Index: 25.0 - 25.0 g/10 min

SAHARA H 250FF is a homopolymer suitable for extrusion applications for textile market. This grade is formulated to have gas fading resistance. SAHARA H 250FF is used for production of continuous filaments (CF), Bulk continuous filaments (BCF) and tape fibers.

Sipchem Sahara C 700 Htp product card banner

Sipchem

Sipchem Sahara C 700 HTP

Polymer Name: Polypropylene Impact Copolymer (ICP)

Processing Methods: Compounding, Injection Molding

Additives Included: Nucleating Agent

Melt Flow Index: 70.0 - 70.0 g/10 min

SAHARA C 700HTP is a nucleated impact copolymer used for injection molding and compounding applications. It exhibits good impact to stiffness balance combined with high fluidity with very good organoleptic properties. SAHARA C 700HTP is typically used in opaque containers, housewares, toys and in thin wall containers for food packaging e.g. Margarine tubs, Yoghurt pots and compounding applications.

Sipchem Sahara C 050 Im product card banner

Sipchem

Sipchem Sahara C 050 IM

Polymer Name: Polypropylene Impact Copolymer (ICP)

Processing Methods: Injection Molding

Melt Flow Index: 5.0 - 5.0 g/10 min

SAHARA C 050 IM is a polypropylene impact copolymer with an optimized balance of stiffness and toughness, high impact strength at low temperature, low warpage and good thermal ageing stability.

Sipchem Sahara C 070 Ba product card banner

Sipchem

Sipchem Sahara C 070 BA

Polymer Name: Polypropylene Impact Copolymer (ICP)

Processing Methods: Injection Molding

Melt Flow Index: 7.0 - 7.0 g/10 min

SAHARA C 070BA is impact copolymer with medium flow viscosity used in injection molding. This grade is characterized by a medium stiffness-impact balance at low temperature as well as a low warpage tendency. The additive formulation provides a good heat aging resistance. This product is typically used in applications that requires high resistance to temperature. This characterized with good heat aging resistance, good impact with low warpage.

Sipchem Sahara C 700htx product card banner

Sipchem

Sipchem Sahara C 700HTX

Polymer Name: Polypropylene Impact Copolymer (ICP)

Processing Methods: Compounding, Injection Molding

Additives Included: Nucleating Agent

Melt Flow Index: 70.0 - 70.0 g/10 min

SAHARA C 700HTX is a nucleated impact copolymer used for injection molding and compounding applications. It exhibits good impact to stiffness balance combined with high fluidity and good organoleptic property. Sahara C 700 HTX is typically used in opaque containers, housewares, toys and in thin wall containers for food packaging (e.g. Margarine tubs, Yoghurt pots) and compounding applications.

Sipchem Sahara H 034 Em product card banner

Sipchem

Sipchem Sahara H 034 EM

Polymer Name: Polypropylene Homopolymer (HPP)

Processing Methods: Extrusion, Thermoforming

Additives Included: Processing Aid

Melt Flow Index: 3.4 - 3.4 g/10 min

SAHARA H 034EM is a polypropylene homopolymer used for extrusion and thermoforming applications. This product is formulated with a low water-carry-over additive package.

Sipchem Sahara C 190 Hm product card banner

Sipchem

Sipchem Sahara C 190 HM

Polymer Name: Polypropylene Impact Copolymer (ICP)

Processing Methods: Injection Molding

Additives Included: Nucleating Agent, Anti-Static Agent

Melt Flow Index: 19.0 - 19.0 g/10 min

SAHARA C 190HM is a nucleated impact copolymer, suitable for injection molding applications, and contains an anti-static agent. It exhibits a high stiffness combined with a medium fluidity. Sahara C 190HM is extensively used in housewares, furniture, cylindrical containers and crate. This grade is not intended for medical and pharmaceutical applications.

Sipchem Sahara C 440 Ht product card banner

Sipchem

Sipchem Sahara C 440 HT

Polymer Name: Polypropylene Impact Copolymer (ICP)

Processing Methods: Injection Molding

Additives Included: Nucleating Agent, Anti-Static Agent

Melt Flow Index: 44.0 - 44.0 g/10 min

SAHARA C 440HT is a nucleated impact copolymer with antistatic agent used for injection molding applications. It combines a good impact/stiffness balance with a high fluidity. This product is designed with antistatic additives.

Sipchem Sahara C 700 Ht product card banner

Sipchem

Sipchem Sahara C 700 HT

Polymer Name: Polypropylene Impact Copolymer (ICP)

Processing Methods: Compounding, Injection Molding

Additives Included: Nucleating Agent

Melt Flow Index: 70.0 - 70.0 g/10 min

SAHARA C 700HT is a nucleated impact copolymer used for injection molding and compounding applications. It exhibits good impact to stiffness balance combined with high fluidity. Sahara C 700 HTX is typically used in opaque containers, housewares, toys and in thin wall containers for food packaging (e.g. Margarine tubs, Yoghurt pots) and compounding applications.

Sipchem Sahara H 600 Im product card banner

Sipchem

Sipchem Sahara H 600 IM

Polymer Name: Polypropylene Homopolymer (HPP)

Processing Methods: Injection Molding

Additives Included: Nucleating Agent, Anti-Static Agent

Melt Flow Index: 60.0 - 60.0 g/10 min

SAHARA H 600IM is a nucleated homopolymer with antistatic additivities. This grade is characterized by high flow and high stiffness. Its typical used by customers in houseware, thin wall food and non-food containers.

Sipchem Sahara C 1000 Ht product card banner

Sipchem

Sipchem Sahara C 1000 HT

Polymer Name: Polypropylene Impact Copolymer (ICP)

Processing Methods: Injection Molding, Compounding

Additives Included: Nucleating Agent, Anti-Static Agent

Melt Flow Index: 100.0 - 100.0 g/10 min

SAHARA C 1000HT is a nucleated impact copolymer with antistatic additivities used for injection molding applications. It exhibits an outstanding balance of mechanical properties combined with a high fluidity. Sahara C 1000 HT is used in housewares and in thin-walled containers for food packaging (e.g. margarine tubs, yoghurt pots, etc.) and compounding applications. This grade is not intended for medical and pharmaceutical applications.

Sipchem Sahara C 160 Hm product card banner

Sipchem

Sipchem Sahara C 160 HM

Polymer Name: Polypropylene Impact Copolymer (ICP)

Processing Methods: Injection Molding

Additives Included: Nucleating Agent, Anti-Static Agent

Melt Flow Index: 16.0 - 16.0 g/10 min

SAHARA C 160HM is a nucleated heterophasic copolymer, suitable for injection molding applications, and contains an anti-static agent. It exhibits a high stiffness combined with a medium fluidity. Sahara C 160HM is extensively used in housewares, furniture, cylindrical containers and crate. This grade is not intended for medical and pharmaceutical applications.

Sipchem Eva 2518 Co product card banner

Sipchem

Sipchem EVA 2518 CO

Polymer Name: Ethylene Vinyl Acetate Copolymer (EVA)

Processing Methods: Compounding, Extrusion, Profile Extrusion, Injection Molding

End Uses: Footwear

Sipchem EVA 2518 CO is an 18% ethylene vinyl acetate copolymer resin, designed for a variety of foam molding application; manufactured by IPC an affiliate of Sipchem in The Kingdom of Saudi Arabia using an Exxon-Mobil high-pressure tubular process. EVA 2518 CO exhibits low melting temperature, excellent processability and mechanical properties.

Sipchem Sahara C 060 Cg product card banner

Sipchem

Sipchem Sahara C 060 CG

Polymer Name: Polypropylene Impact Copolymer (ICP)

Processing Methods: Injection Molding, Compression Molding

Additives Included: Slip Agent, Nucleating Agent, Anti-Static Agent

Melt Flow Index: 6.0 - 6.0 g/10 min

SAHARA C 060CG is a polypropylene impact copolymer suitable for production of beverage closures for both compression and injection molding fabrications. This product is offering a good balance between stiffness and impact strength. This product is nucleated and additivities with slip and antistatic agent. It also could be used in other injection molding applications such as houseware and medium size containers.

Sipchem Sahara C 300 Ht product card banner

Sipchem

Sipchem Sahara C 300 HT

Polymer Name: Polypropylene Impact Copolymer (ICP)

Processing Methods: Injection Molding

Melt Flow Index: 30.0 - 30.0 g/10 min

SAHARA C 300HT is a polypropylene impact copolymer with optimized balance of stiffness and toughness, and high impact strength even at low temperature. Typical customer applications are injection molding of washing machine tubs, electrical appliance parts, housewares and thin walled packaging.

Sipchem Sahara H 120 Im product card banner

Sipchem

Sipchem Sahara H 120 IM

Polymer Name: Polypropylene Homopolymer (HPP)

Processing Methods: Injection Molding

Melt Flow Index: 12.0 - 12.0 g/10 min

SAHARA H 120IM is a homopolymer used for general purpose injection molding applications. It exhibits good flow and stiffness. Its attribute in medium flow and stiffness.