Knowde Enhanced TDS
Identification & Functionality
- Chemical Name
- INCI Name
- Cleaning Ingredients Functions
- Cosmetic Ingredients Functions
- Industrial Additives Functions
- CAS No.
- 1643-20-5
- EC No.
- 216-700-6
- Product Families
- Chemical Structure
X = 11 (Predominantly)
Features & Benefits
- Benefit Claims
- Labeling Claims
- HII Features
- Functional Properties
- Foam Enhancer
- Foam Stabilizer
- Viscosity Builder
- Lubricant*
- Bleach Stable
- Emulsifier*
- Wetting Agent*
- Dye Dispersant*
- Acid Stable
- Can be formulated with anionic, nonionic and cationic materials.
(*For the textile industry)
- Product Features & Attributes
- Preservative Free
- Stable in Hydrogen peroxide
- Stable in Hypochlorite bleach
- Superior Grease Cutter
- Lime Soap Dispersant (neutral to alkaline pH)
- Biodegradability
Product is readily biodegradable.
Applications & Uses
- Applications
- Bath & Shower Applications
- Hair Care Applications
- Home Care Applications
- I&I Cleaning Applications
- Industrial Additives End Use
- Personal Hygiene Applications
- Skin Care Applications
- End Product Uses
Personal Care
- Shampoos
- Handsoaps
- Bath Products
- Creams & Lotions
- Hair Conditioners
Household, I&I
- Dishwashing Detergents
- Cleansers
- Hard Surface Cleaners (which contain acids or bleach)
Properties
- Physical Form
- Appearance
- Clear liquid (at 25°C)
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Biorenewable Carbon Index | 86 | % | — |
| Boiling Point | 100 | °C | — |
| pH (10% in aqueous solution) | 6.5 - 8.0 | — | — |
| Cloud Point | -7 | °C | — |
| Amine Oxide (MW 251) | 30 | % | — |
| Density | 0.99 | g/ml | — |
| Free Amine (MW 232) | max. 1 | % | — |
| Flash Point | min. 94 | °C | PMCC Flash Point Tester |
| Free Peroxide | max. 0.2 | % | — |
| Viscosity (at 25°C) | 77 | cPs | — |
| Regulated Volatile Organic Chemicals | 0 | % | U.S. EPA |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Clearances
- All components of AMMONYX LO Special are listed in the following countries; the registration numbers for the active ingredients are included in parentheses: United States (TSCA 1643-20-5), Europe (EINECS 216-700- 6), Japan (ENCS 2-198), Canada (DSL 1643-20-5), Australia (AICS 1643-20-5), Korea (ECL Serial No. KE- 11348), Philippines (PICCS 1643-20-5) and China (IEICS 1643-20-5).
- AMMONYX LO Special is cleared for use under 40 CFR 180.910, pre- and post-harvest applications.
Safety & Health
- Toxicity
The available toxicity data shows AMMONYX LO Special to be slightly toxic orally to rats, (LD₅₀ = 3600 mg/kg). At 2.5% active, AMMONYX LO Special may cause severe eye irritation and minimal irritation to the skin.
Packaging & Availability
- Standard Packaging
AMMONYX LO Special is available in bulk, totes and 55 gallon drum quantities.
Storage & Handling
- Storage & Handling
- Normal safety precautions (i.e. gloves and safety goggles) should be employed when handling AMMONYX LO Special. Contact with the eyes and prolonged contact with the skin should be avoided. Wash hands thoroughly after handling material.
- It is recommended that AMMONYX LO Special be stored in sealed containers and kept at temperatures not lower than 50°F (10°C) nor higher than 120°F (49°C). Avoid overheating or freezing.
- Bulk Storage Information: Tanks, with a conservation vent, made of 316L stainless steel or fiberglass with an Atlac 382 corrosion liner are recommended. Centrifugal or positive displacement gear pumps and piping should be 316L stainless steel. Recommended storage for bulk tanks is 20-52°C (68-125°F).