BIO-SOFT® N25-7

1 of 56 products in this brand
BIO-SOFT® N25-7 is a c12–15 linear alcohol ethoxylate boasting fast wetting, excellent detergent, and emulsification attributes. Its low interfacial tension and low cmc make it particularly suitable for laundry detergents and prespotters, textiles, hard surface cleaning, paints, and institutional and industrial cleaning. It adheres to the u.S. Epa safer choice program's surfactant screen and is listed on cleangredients.

Chemical Name: Alcohols, C12-15, ethoxylated

Functions: Detergent, Emulsifier, Solubilizer, Surfactant, Surfactant (Nonionic), Wetting Agent

Chemical Family: Alcohol Ethoxylates

Labeling Claims: Kosher, Preservative-free

Certifications & Compliance: Kosher, Safer Choice

Knowde Enhanced TDS

Identification & Functionality

Chemical Family
CAS No.
68131-39-5
EC No.
500-195-7
Chemical Structure

CH3(CH2)n-O(CH2CH2O)yH

n = 11-14, y = average moles of ethoxylation

Surfacant Type

Non-ionic

Features & Benefits

Agrochemicals Features
Features

Preservative Free

Functional Properties
  • Detergent
  • Excellent wetting agents
  • Low (BIO-SOFT N25-3) to moderate (BIO-SOFT N25-7, BIO-SOFT N25-9) foam production.
  • Emulsification
  • Solubilizer
  • Can be used in conjunction with anionic, amphoteric and cationic surfactants.
Biodegradability

The BIO-SOFT N25 Series products are readily biodegradable.

Applications & Uses

Fluids & Lubricants Type
Fluids & Lubricants End Use
Industrial Additives End Use
Applications

The BIO-SOFTN25 series is a line of high active nonionic surfactants. The BIO-SOFTN25 series products are stable in both aqueous acidic and alkaline solutions, allowing for application in a wide range of products. The alcohol ethoxylates containing between one and five moles of ethoxylation are primarily useful in oil-based systems.

End Product Uses
  • Laundry products
  • Textiles
  • Hard surface cleaners
  • Paints
  • Hand dishwashing presoaks
  • Pesticides
  • Rug cleaners

Properties

Physical Form
Appearance
Clear liquid to white paste (at 25°C)
Stable in
Alkaline solutions, Aqueous acidic solutions
Typical Properties
ValueUnitsTest Method / Conditions
Colormax. 50Apha Scale
Density0.96g/ml
Average Number of Moles of Ethylene Oxide7.25
HLB12.2
Actives Contentmin. 99.5%
Pour Point17 - 21°C
Viscosity (at 38°C)29cPs
Cloud Point (in 1% aqueous solution)46 - 54°C
Flash Pointmin. 94°CPMCC Flash Point Tester
Regulated Volatile Organic Chemicals0%U.S. EPA

Regulatory & Compliance

Certifications & Compliance
Clearances
  • All components of the BIO-SOFT N25 Series products are listed in the following countries; the registration number of the active ingredient is listed in parentheses: United States (TSCA 68131-39-5), Europe (NLP 500-084-3), Canada (DSL 68131-39-51), Australia (AICS 68131-39-5), Korea (ECL KE-13388) and Philippines (PICCS 68131-39-5).
  • The BIO-SOFT N25 Series is approved for use under EPA 40CFR 180.910, pre- and post-harvest, 180.930.
  • BIO-SOFT N25-7 meets the U.S. EPA Safe Choice Program’s surfactant screen.

Safety & Health

Toxicity

The BIO-SOFT N25 Series products are slightly toxic orally (LD₅₀ ≥1800mg/kg). Undiluted the BIO-SOFT N25 Series products are severe skin and eye irritants while a 1% dilution generally causes slight to mild skin irritation.

Packaging & Availability

Packaging Type
Standard Packaging

The BIO-SOFT N25 Series products are available in 55-gallon drums (450lb/205 kg) and in bulk quantities.

Storage & Handling

Storage & Handling
  • Normal safety precautions (i.e., gloves, safety goggles) should be employed when handling BIO-SOFT N25 Series products. Avoid contact with eyes, nose or prolonged skin contact. Wash exposed areas thoroughly after handling material.
  • While diluting the BIO-SOFT N25 Series products, as with all alcohol ethoxylates, they are prone to gelling. If the product is diluted into water, heating may be required to minimize or eliminate gel formation.
  • It is recommended that the BIO-SOFT N25 Series products be stored in sealed containers and kept in a cool, dry place. If the products are frozen, they should be heated gently and stirred to ensure they are homogeneous before use.