Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Agrochemical Functions
- Cleaning Ingredients Functions
- CAS No.
- 68953-96-8
- EC No.
- 273-234-6
- Technologies
- Product Families
- Surfactant Type
Anionic.
Features & Benefits
- HII Features
Applications & Uses
- Applications
- Home Care Applications
- I&I Cleaning Applications
- Applications
NINATE 401-A is an anionic surfactant that is used in combination with nonionic surfactants to form effective emulsifier systems for many pesticide emulsifiable concentrate formulations.
Properties
- Formulation Type
- Physical Form
- Appearance
- Hazy Amber liquid (at 25°C)
- Insoluble in
- Water
- Soluble in
- Kerosene, Methanol, Xylene
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Density (at 25°C) | 1.025 | g/ml | — |
| Flash Point | 65.6 | °C | PMCC Flash Point Tester |
| Moisture Content | max. 0.8 | % | — |
| pH (5% in 1:1 IPA:H₂O) | 4.5-5.5 | — | — |
| Viscosity (at 50 °C) | max. 1000 | cPs | — |
| Pour Point | -7 | °C | — |
| Activity Content | 60 | % | — |
| Regulated Volatile Organic Chemicals (Aromatic Naphtha, Hexanol) | 34 | % | U.S. EPA |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Clearances
NINATE 401-A is approved for use as an inert ingredient under U.S. EPA 40 CFR 180.910, pre- and postharvest applications.
Packaging & Availability
- Standard Packaging
NINATE 401-A is available in drums (450 lb, 205 kg) and in bulk quantities.
Storage & Handling
- Storage & Handling
Normal safety precautions (i.e. gloves and safety goggles) should be employed when handling NINATE 401-A. Contact with the eyes and prolonged contact with the skin should be avoided. Wash thoroughly after handling materials. Use product in a well-ventilated area away from sparks and open flame.
Bulk Storage Information
Stainless steel and glass fiber-reinforced polyester tanks are recommended. Many oven-cured phenolic and epoxy/phenolic linings may also be used. Elevated storage temperature may be desirable to maintain ease of pumping. Temperatures up to 130°F (54°C) can be maintained for long periods of time without degradation of the product. NINATE 401-A which has been stored in drums at temperatures below 25F (-4C) may thicken or solidify. It may be fluidized by warming with a drum heater or in a steam room. Drums should be vented during heating to avoid excessive pressure build up. Product temperatures over 130°F (54°C) are not recommended, as excessive solvent loss may occur. The flash point may be exceeded when warming to pump but the temperature should be below the flash point for storage. Keep away from open flame and provide ventilation.