Knowde Enhanced TDS
Identification & Functionality
- Chemical Name
- Cleaning Ingredients Functions
- Technologies
- Product Families
- Surfactant Type
Cationic.
Features & Benefits
- Labeling Claims
- HII Features
- Biodegradability
Product is biodegradable.
Applications & Uses
- Markets
- Applications
- Home Care Applications
- I&I Cleaning Applications
- Applications
SO/SAN 30M is a cationic material. Do not mix with soap or other anionic materials. For formulation into antimicrobial products for use in laundry (commercial, vet, hospital, household) and diapers (household, presoak, hospital, commercial). Formulators using this product are responsible for providing data for the EPA registration of their formulated products.
Properties
- Physical Form
- Appearance
- Opaque liquid (at 25°C)
- Typical Properties
- Composition
| Value | Units | Test Method / Conditions | |
| Boiling Point | 100 | °C | — |
| Density | 0.97 | g/ml | — |
| Flash Point | 29 | °C | PMCC Flash Point Tester |
| pH (10% solution, 1:1 with isopropanol) | 4.7 | — | — |
| Active Germicide (MW 384) | 26.0 - 28.0 | % | — |
| Active Softener | 20.0 - 23.0 | % | — |
| Regulated Volatile Organic Chemicals (Isopropyl and ethyl alcohol) | 14 | % | U.S. EPA |
| Value | Units | Test Method / Conditions | |
| Active Biocidal Ingredients [Alkyl (60% C14, 30% C16, 5% C12, 5% C18) Dimethyl Benzyl Ammonium Chloride] | 13 | % | — |
| Active Biocidal Ingredients [Alkyl (68% C12, 32% C14) Dimethyl Ethylbenzyl Ammonium Chloride] | 13 | % | — |
| Inert Ingredients | 74 | % | — |
| Total Actives | 100 | % | — |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Clearances
All components of SO/SAN 30M are listed in United States (TSCA), Europe (EINECS), Canada (DSL), Australia (AICS), Korea (ECL), and Philippines (PICCS). Review the chemical control regulations for each country.
Safety & Health
- Health Effects
SO/SAN 30M is slightly toxic orally (LD50 >500 mg/Kg) and dermally (LD50 >2g/Kg) and it causes severe skin and eye irritation.
Packaging & Availability
- Standard Packaging
SO/SAN 30M is available in 55 gallon drums (440 lb, 182 kg) and in bulk quantities.
Storage & Handling
- Storage & Handling
Handle SO/SAN 30M with care; use away from sparks and open flames. Use in a well ventilated area. Refer to registered label for additional storage and handling information. It is recommended that SO/SAN 30M be stored in sealed containers and kept in a cool dry place. If material is frozen it should be heated gently and stirred to ensure it is homogeneous before use.
Bulk Storage Information
SO/SAN 30M can be stored in vessels of 316 stainless steel or fiberglass with a corrosion liner. Contact between quaternaries and anionic materials, soap and sulfated oils must be avoided. SO/SAN 30M should be stored between 85-120 °F. An internal hairpin coil of 316 stainless steel with low pressure steam (under 50 psig) should be used if heating is required. Mild agitation is recommended while storing to maintain homogeneity. Pumps, pipes and transfer lines should be 316 stainless steel. Rubber hoses with Teflon cross-linked polyethylene with 316 stainless steel fittings are recommended for loading and unloading.
- Workplace Exposure
Occupational exposure can occur primarily through skin contact or via inhalation of vapors and mists. Engineering controls, personal protective equipment, and other workplace practices should be used to control these exposures.