Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Chemical Name
- Product Type
- Cleaning Ingredients Functions
- Technologies
- Product Families
- Chemical Structure
-
R= C7H15 or C9H19
Features & Benefits
- Labeling Claims
- Biodegradability
This product is readily biodegradable.
Applications & Uses
- Markets
- Applications
- Home Care Applications
- I&I Cleaning Applications
- Applications
STEPOSOL M-8-10 belongs to a unique class of disubstituted amides with utility in coatings, household, industrial and institutional applications. STEPOSOL M-8-10 displays a broad range of properties, including excellent solvency, a low VOC content, as well as heat and hydrolysis stability.
Properties
- Physical Form
- Appearance
- Clear liquid (at 25°C)
- Partially Soluble in
- Water
- Soluble in
- Kerosene, Methanol, Xylene
- Typical Properties
Value | Units | Test Method / Conditions | |
Boiling Point | 260 | °C | — |
Cloud Point | max. -20.0 | °C | — |
Viscosity (at 25°C) | 11 | cPs | — |
Color | 8 | — | Apha Scale |
Color | max. 2 | — | Gardener Scale |
pH (1% in aqueous solution) | 7.4 | — | — |
Density (at 25°C) | 0.88 | g/ml | — |
Flash Point | 118 | °C | PMCC Flash Point Tester |
Kauri-Butanol Value | min. 300 | — | — |
Melting Point | -17 | °C | — |
Freeze Point | -34 | °C | — |
Pour Point | -19.6 | °C | — |
Dielectric Constant (at 25°C) | 17 | — | — |
Refractive Index (at 20 °C) | 1.452 | — | — |
Surface Tension | 30.9 | dynes/cm | — |
Volatile Organic Compound | 32.6 | % | CARB Method 310 |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Clearances
- All components of STEPOSOL M-8-10 are listed in the following countries; the registration number for the active ingredient is included in parentheses: United States (TSCA 14433-76-2), Canada (NDSL 14433-76-2), Australia (AICS 14433-76-2), Korea (ECL Serial No. KE-11322), China (IECSC 14433-76-2), Japan (ENCS 2-825), Europe (EINECS 238-405-1). Per the California Air Resources Board’s (CARB) Consumer Product Rule, OTC Model Rule and Federal VOC Standards, STEPOSOL M-8-10 is exempt from VOC limit requirements because it is a LVP-VOC (low vapor pressure VOC).
- All regulations define an LVP-VOC as a compound or mixture which meets one of the following criteria: 1) The compound has a vapor pressure of less than 0.1 mm Hg at 20 °C; 2) the compound has more than 12 carbon atoms, or a mixture compromised solely of compounds with more than 12 carbon atoms, and the vapor pressure is unknown or 3) the compound has a boiling point greater than 216 °C. It is the responsibility of the formulator to review the chemical control regulations for each country where the end product is intended to be sold or used.
Safety & Health
- DOT Classification
Non-regulated
- Toxicity
STEPOSOL M-8-10 was found to be slightly toxic orally (LD50 = 1,750 mg/kg). Undiluted product may cause severe eye and skin irritation.
- Other Data DOT Classification
Non-regulated
Packaging & Availability
- Standard Packaging
Available in drums (390 lb, 177 kg) or bulk.
Storage & Handling
- Storage & Handling
Normal safety precautions (i.e., gloves and safety goggles) should be employed when handling STEPOSOL M-8-10. Contact with eyes and prolonged contact with skin should be avoided. Wash thoroughly after handling materials.
Bulk Storage Information
Stainless steel tanks are recommended. Temperatures up to 130 °F (54 °C) can be maintained for long periods of time without degradation of the product.