Knowde Enhanced TDS
Identification & Functionality
- Polymer Name
- Technologies
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Tensile Strength | 2.0 (293) | MPa (psi) | ISO 37, Type 1, 50mm/min |
| Elongation at Break | 620 | % | ISO 37, Type 1, 50mm/min |
| Tear Strength | 14 (83) | kN/m (pli) | ISO 34-1, Method B, Procedure b, 50mm/min |
| Value | Units | Test Method / Conditions | |
| Specific Gravity | 1.03 | — | ISO 1183, Method A |
| Hardness | 45 | Shore D | ISO 868, 15 sec delay |
| 100% Modulus | 1.0 (145) | MPa (psi) | ISO 37, Type 1, 50mm/min |
| Low Temperature Brittleness at -40°C | Pass | Pass/Fail | ISO 812, Procedure A |
| Ozone Resistance | Pass | No Cracking | ISO 1431-1, Procedure A, 51 MPa, 20% Elongation |
| Flammability Resistance | 49 | mm/min | SAE J369 |
| Hardness Change | 2 | % | ISO 188, 1008 Hours at 100°C in an air circulating oven followed by indicated property testing at 23°C |
| Tensile Strength Change | 12 | % | ISO 188, 1008 Hours at 100°C in an air circulating oven followed by indicated property testing at 23°C |
| Elongation Change | -14 | % | ISO 188, 1008 Hours at 100°C in an air circulating oven followed by indicated property testing at 23°C |
Packaging & Availability
- Regional Availability