Knowde Enhanced TDS
Identification & Functionality
- Polymer Name
- Technologies
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Tensile Strength | 5.0 (725) | MPa (psi) | ISO 37, Type 1, 50mm/min |
Elongation at Break | 400 | % | ISO 37, Type 1, 50mm/min |
Tear Strength | 26 (145) | kN/m (pli) | ISO 34-1, Method B, Procedure b, 50mm/min |
Value | Units | Test Method / Conditions | |
Low Temperature Brittleness at -40°C | Pass | Pass/Fail | ISO 812, Procedure A |
Ozone Resistance | Pass | No Cracking | ISO 1431-1, Procedure A, 51 MPa, 20% Elongation |
Tensile Strength Change | 9 | % | ISO 188, 1008 Hours at 100°C in an air circulating oven followed by indicated property testing at 23°C |
Specific Gravity | 1.02 | — | ISO 1183, Method A |
Hardness | 75 | Shore D | ISO 868, 15 sec delay |
100% Modulus | 3.0 (435) | MPa (psi) | ISO 37, Type 1, 50mm/min |
Flammability Resistance | 39 | mm/min | SAE J369 |
Hardness Change | 1 | % | ISO 188, 1008 Hours at 100°C in an air circulating oven followed by indicated property testing at 23°C |
Elongation Change | -11 | % | ISO 188, 1008 Hours at 100°C in an air circulating oven followed by indicated property testing at 23°C |
Packaging & Availability
- Regional Availability