Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Sustainability
Products
Cosmetic Ingredients
Food Ingredients
Knowde for Suppliers
Browse
Sample
Chat
Request
Search
category
Building & Construction
Products
Tasnee
All Tasnee
Search products
Building & Construction
Applications
Decorative Materials & Finishes
Building Materials
Flooring & Surfaces
Building Envelope & Roofing
Product Families
Chemical Family
All Filters
10 Products found on Tasnee in
Building & Construction
Most Viewed
SDS
With SDS
TDS
With TDS
Tasnee HDPE 100 Black
Polymer Name:
High Density Polyethylene (HDPE)
Processing Methods:
Extrusion
Melt Flow Index:
6.4 - 6.4 g/10 min
Tasnee HD 100 Black is a High Density Polyethylene, black colored resin. The product is classified as PE 100. Tasnee HD 100 Black provides excellent environmental stress cracking resistance properties (ESCR) with very good long term hydrostatic strength and combines very high impact and stiffness properties.
Tasnee HDPE NPP Black
Polymer Name:
High Density Polyethylene (HDPE)
Processing Methods:
Extrusion
Melt Flow Index:
0.6 - 0.6 g/10 min
Tasnee NPP Black is a High Density Polyethylene, black colored resin. It has high melt viscosity, it is an appropriate resin for extrusion of non pressure pipes.
Tasnee PP H1030
Polymer Name:
Polypropylene Homopolymer (HPP)
Processing Methods:
Extrusion, Injection Molding
Melt Flow Index:
3.0 - 3.0 g/10 min
Tasnee PP H1030 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 3 g/10min. Tasnee PP H1030 is designed for stretch tape from water bath and chill roll, offering low water-carry-over and low shrinkage. Its good mechanical properties and compliance to food contact regulations allow it to be used in various applications.
Tasnee PP H2350
Polymer Name:
Polypropylene Homopolymer (HPP)
Processing Methods:
Extrusion, Injection Molding
Melt Flow Index:
35.0 - 35.0 g/10 min
Tasnee PP H2350 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 35.0 g/10min. Tasnee PP H2350 is a very narrow molecular weight distribution homopolymers, suitable for the extrusion of fine fibers with the spunbond technology for non-woven applications. It is also suitable for continuous filament (CF) yarns.
Tasnee PP H2045
Polymer Name:
Polypropylene Homopolymer (HPP)
Processing Methods:
Extrusion
Additives Included:
Gas Fading Stabilizer
Melt Flow Index:
4.5 - 4.5 g/10 min
Tasnee PP H2045 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 4.50 g/10min. Tasnee PP H2045 is a medium molecular weight distribution grade with anti-gas fading stabilization system. It exhibits very good spinning performance and excellent mechanical properties.
Tasnee PP H2250
Polymer Name:
Polypropylene Homopolymer (HPP)
Processing Methods:
Extrusion, Injection Molding
Melt Flow Index:
25.0 - 25.0 g/10 min
Tasnee PP H2250 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 25 g/10min. Tasnee PP H2250 is a medium narrow molecular weight distribution with anti-gas fading stabilization. It is intended for the extrusion of fine fibers with the spunbond technology for non-woven applications. It is also suitable for the extrusion of bulk continuous filament (BCF) for carpet pile and continuous filament (CF) yarns.
Tasnee LDPE 1925F
Polymer Name:
Low Density Polyethylene (LDPE)
Processing Methods:
Extrusion, Foam Extrusion
Melt Flow Index:
1.9 - 1.9 g/10 min
Tasnee LD 1925F is a Low Density Polyethylene with a Melt Flow Rate of 2.0 g/10min (190°C/2.16 kg). Tasnee LD 1925F is mainly recommended for crosslinked and non-crosslinked foam applications. It designed to provide uniform cell distribution during LDPE foam extrusion process. Special additive package is used to control the foam cell structure so that uniform cell size and distribution occurred during foam extrusion process. It has a suitable molecular structure and special additive package for providing control and uniform foam cell structure and excellent mechanical properties to the foam. Tasnee LD 1925F can be easily processed on all types of LDPE foam extrusion equipment. The melt temperature is recommended to be in the range of 160 - 200°C.
Tasnee HDPE 100 Blue
Polymer Name:
High Density Polyethylene (HDPE)
Processing Methods:
Extrusion, Injection Molding
Melt Flow Index:
6.4 - 6.4 g/10 min
Tasnee HD 100 Blue is a High Density Polyethylene, blue colored resin. The product is classified as PE 100. Tasnee HD 100 Blue provides excellent environmental stress cracking resistance properties (ESCR) with very good long term hydrostatic strength and combines very high impact and stiffness properties.
Tasnee PP H1045
Polymer Name:
Polypropylene Homopolymer (HPP)
Processing Methods:
Extrusion
Melt Flow Index:
4.5 - 4.5 g/10 min
Tasnee PP H1045 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 4.5 g/10min. Tasnee PP H1045 is designed for high extrusion speed lines to make stretch tapes, offering low water-carry-over and low shrinkage. Good balance of strength, shrinkage, splitting tendency. It is compliant to food contact regulations.
Tasnee PP H2245
Polymer Name:
Polypropylene Homopolymer (HPP)
Processing Methods:
Extrusion
Additives Included:
Gas Fading Stabilizer
Melt Flow Index:
24.5 - 24.5 g/10 min
Tasnee PP H2245 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 24.5 g/10min. Tasnee PP H2245 is a medium molecular weight distribution with anti-gas fading stabilization system. It has excellent gloss and chining properties.