HiFill FR® PA6/6,6 FR NAT
HiFill FR® PA6/6,6 FR NAT by Techmer PM is comprised of Polyamide 66/6. It is commonly used for a variety of applications. . HiFill FR® PA6/6,6 FR NAT is certified as UL Flame Rated. It is available in Pellets form.
Product Resources
Knowde Enhanced TDS
Identification & Functionality
Chemical Family
Polymer Name
Plastics & Elastomers Functions
Technologies
Product Families
Features & Benefits
Plastics Features
Summary
Flame Retardant
Applications & Uses
Plastics & Elastomers Processing Methods
Properties
Physical Properties
| Value | Units | Test Method / Conditions | |
| Density / Specific Gravity | 1.19 | g/cm3 | ASTM D792 |
| Molding Shrinkage - Flow (0.125 in) | 0.009 | in/in | ASTM D955 |
| Water Absorption (24 hr) | 0.7 | % | ASTM D570 |
Mechanical Properties
| Value | Units | Test Method / Conditions | |
| Tensile Strength at Break | 9500 | psi | ASTM D638 |
| Tensile Elongation at Yield | 60 | % | ASTM D638 |
| Flexural Modulus | 210000 | psi | ASTM D790 |
| Izod Notched Impact Strength (73°F, 0.125 in) | 2.5 | ft.lb/in | ASTM D256 |
| Rockwell Hardness - R Scale | 112 | - | ASTM D785 |
Thermal Properties
| Value | Units | Test Method / Conditions | |
| Coefficient of Linear Thermal Expantion - Flow | 3.3e-05 | in/in/°F | ASTM D696 |
| Deflection Temperature Under Load - DTUL (264 psi, Unannealed) | 199 | °F | ASTM D648 |
Electrical Properties
| Value | Units | Test Method / Conditions | |
| Surface Resistivity | 1000000000000 | Ohm | ASTM D 257 |
| Dielectric Strength - Method A (Short-Time) | 530 | V/mil | ASTM D149 |
| Volume Resistivity | 1000000000000000 | ohm.m | IEC 60093 |
Flammability
| Value | Units | Test Method / Conditions | |
| Flame Rating (0.03 in) | V-0 | - | UL 94 |
Processing Information (Injection Molding)
| Value | Units | Test Method / Conditions | |
| Drying Temperature | 180 | °F | - |
| Drying Time | >6.0 | h | - |
| Front Temperature | 490 to 530 | °F | - |
| Middle Temperature | 490 to 530 | °F | - |
| Rear Temperature | 490 to 530 | °F | - |
| Mold Temperature | 150 to 200 | °F | - |
| Back Pressure | 50.0 to 100 | psi | - |
| Screw Speed | 30 to 60 | rpm | - |
| Processing Melt Temperature | 480 to 520 | °F | - |
Regulatory & Compliance
Certifications & Compliance
Packaging & Availability
Regional Availability
Product Page Index
f
i
n
p
r
u
Follow
News