product
Producer:
Techmer PM Brand:
Hifill HiFill® PA6/6 GF25 L BK is a Polyamide 66 (Nylon 66) product filled with 25% glass fiber. It can be processed by injection molding and is available in North America.Characteristics include: Heat Stabilizer Lubricated
Hifill® PA6/6 GF25 L BK
Producer:
Techmer PM Brand:
Hifill HiFill® PA6/6 GF25 L BK is a Polyamide 66 (Nylon 66) product filled with 25% glass fiber. It can be processed by injection molding and is available in North America.Characteristics include: Heat Stabilizer Lubricated
Take Action
Experts (1)
Knowde Enhanced TDS
Identification & Functionality
Additives Included
Chemical Family
Fillers Included
Polymer Name
Plastics & Elastomers Functions
Technologies
Product Families
Features & Benefits
Plastics Features
Additives
Applications & Uses
Plastics & Elastomers Processing Methods
Properties
Physical Form
Physical Properties
Value | Units | Test Method / Conditions | |
Density / Specific Gravity | 1.3 | g/cm3 | ASTM D792 |
Molding Shrinkage - Flow (0.125 in) | 0.003 | in/in | ASTM D955 |
Water Absorption (24 hr) | 1.8 | % | ASTM D570 |
Mechanical Properties
Value | Units | Test Method / Conditions | |
Tensile Strength at Break | 23000 | psi | ASTM D638 |
Tensile Elongation at Break | 3.5 | - | ASTM D412 |
Flexural Strength | 30000 | psi | ASTM D790 |
Flexural Modulus | 1000000 | psi | ASTM D790 |
Notched Izod Impact Strength (73°F, 0.125 in) | 1.4 | ft.lb/in | ASTM D256 |
Rockwell Hardness (R-Scale) | 115 | - | ASTM D785 |
Thermal Properties
Value | Units | Test Method / Conditions | |
Coefficient of Linear Thermal Expansion - Flow | 0.000011 | in/in/°F | ASTM D696 |
Deflection Temperature Under Load - DTUL (264 psi, Unannealed) | 490 | °F | ASTM D648 |
Deflection Temperature Under Load - DTUL (66 psi, Unannealed) | 499 | °F | ASTM D648 |
Electrical Properties
Value | Units | Test Method / Conditions | |
Dielectric Strength - Method A (Short-Time) | 490 | V/mil | ASTM D149 |
Volume Resistivity | 1000000000000000 | ohm.m | IEC 60093 |
Processing Information (Injection Molding)
Value | Units | Test Method / Conditions | |
Drying Temperature | 180 | °F | |
Drying Time | 2.0 to 4.0 | hr | |
Suggested Max Moisture | 0.12 | % | |
Front Temperature | 530 to 550 | °F | |
Middle Temperature | 550 to 570 | °F | |
Rear Temperature | 540 to 560 | °F | |
Nozzle Temperature | 540 to 560 | °F | |
Processing (Melt) Temperature | 540 to 580 | °F | |
Mold Temperature | 130 to 200 | °F | |
Back Pressure | 50.0 to 100 | psi | |
Injection Rate | Moderate-Fast | - |
Color
Black
Physical Form
Pellets
Fillers
Glass Fiber
Packaging & Availability
Regional Availability