product
Company logo
product
Chemlon® MDM54
Search in

Producer: 
Teknor Apex
Brand: 
Chemlon
MDM54 is a UL recognised, V-2 rated halogen & phosphorus free flame retarded, mineral filled injection moulding grade of nylon 6, primarily intended for electrical applications.

Chemlon® MDM54

Producer: 
Teknor Apex
Brand: 
Chemlon
MDM54 is a UL recognised, V-2 rated halogen & phosphorus free flame retarded, mineral filled injection moulding grade of nylon 6, primarily intended for electrical applications.
Take Action

Knowde Enhanced TDS

Expand All

+

Identification & Functionality

+
Chemical Family
Fillers Included
Plastics & Elastomers Functions
Technologies

Applications & Uses

+

Properties

+
Flame Rating
Physical Form
Mechanical Properties
ValueUnitsTest Method / Conditions
Tensile Modulus609000/160000psiISO 527-2
Tensile Stress at Yield--/5800psiISO 527-2
Tensile Stress at Break11200/--psiISO 527-2
Tensile Strain at Break5/7 %-ISO 527-2
Flexural Modulus580000/319000psiISO 178
Flexural Stress--/5510psiISO 178
Charpy Notched Impact Strength2.6/11ft.lb/in2ISO 179
Notched Izod Impact Strength2.9/--ft.lb/in2ISO 180/A
Physical Properties
ValueUnitsTest Method / Conditions
Molding Shrinkage0.90 to 1.6/-- %-Internal Method
Density1.29/--g/cm3ISO 1183
Thermal Properties
ValueUnitsTest Method / Conditions
Heat Deflection Temperature (264 psi, Unannealed)172/163°FISO 75-2/A
Electrical Properties
ValueUnitsTest Method / Conditions
Relative Permittivity (1 MHz)3.9/5.9-IEC 60250
Dissipation Factor (1 MHz)0.02/0.08-IEC 60250
Surface resistivity100000000000000/100000000000ohmsIEC 60093
Electric Strength (0.118 in)280/230V/milIEC 60243-1
Comparative Tracking Index - CTI> 600/> 600VIEC 60112
Volume Resistivity1000000000000000/100000000000ohm.mIEC 60093
Flammability
ValueUnitsTest Method / Conditions
Flame Rating (0.06 in)V-2/---UL 94
Glow Wire Flammability Index1760/--°FIEC 60695-2-12
Oxygen index24/-- %-ISO 4589-2
Other Properties
ValueUnitsTest Method / Conditions
Water Absorption - Equilibrium (73°F, 50% RH)1.2/-- %-ISO 62
Processing Information (Injection Molding)
ValueUnitsTest Method / Conditions
Drying Time2hr
Drying Temperature176°F
Rear Temperature464 to 500°F
Middle Temperature464 to 500°F
Front Temperature464 to 500°F
Processing (Melt) Temperature< 572°F
Mold Temperature140 to 176°F
Screw Speed50 to 200rpm
Injection RateFast-
Flame Rating
UL 94 V2
Physical Form
Pellets
Fillers
Mineral

Regulatory & Compliance

+
Certifications & Compliance
Certifications
UL Flame Rated

Packaging & Availability

+
Regional Availability