product
product
Monprene® IN-12090
Search in

Producer: 
Teknor Apex
Brand: 
Monprene
Monprene IN-12090 is a general purpose thermoplastic elastomer, available in NAT and BLK, designed for a variety of industrial applications, including seals and gaskets. Monprene IN-12090 is a low density, high hardness TPE that is suitable for injection molding and extrusion.

Monprene® IN-12090

Producer: 
Teknor Apex
Brand: 
Monprene
Monprene IN-12090 is a general purpose thermoplastic elastomer, available in NAT and BLK, designed for a variety of industrial applications, including seals and gaskets. Monprene IN-12090 is a low density, high hardness TPE that is suitable for injection molding and extrusion.
Take Action

Knowde Enhanced TDS

Expand All

+

Properties

+
Physical Form
Physical Properties
ValueUnitsTest Method / Conditions
Density / Specific Gravity0.89g/cm3ASTM D792
Melt Mass Flow Rate - MFR (200°C/5.0 kg)1.5g/10 minASTM D1238
Mechanical Properties
ValueUnitsTest Method / Conditions
Tensile Strength at Break - Flow1920psiASTM D412
Tensile Strength at Break - Across Flow3000psiASTM D412
Tensile Elongation at Break - Flow6.7-ASTM D412
Tensile Elongation at Break - Across Flow8.3-ASTM D412
Tensile Stress at 300% Strain - Flow1010psiASTM D412
Tensile Stress at 300% Strain - Across Flow803psiASTM D412
Tensile Stress at 100% Strain - Flow775psiASTM D412
Tensile Stress at 100% Strain - Across Flow620psiASTM D412
Compression Set (158°F, 22 hr)0.63-ASTM D395B
Compression Set (73°F, 22 hr)0.3-ASTM D395B
Durometer Hardness (Shore A, sec)91-ASTM D2240
Tear Strength - Flow340lbf/inASTM D624
Tear Strength - Across Flow362lbf/inASTM D624
Thermal Properties
ValueUnitsTest Method / Conditions
Vicat Softening Temperature149°FASTM D1525
Processing Information (Extrusion)
ValueUnitsTest Method / Conditions
Die Temperature400 to 440°F
Cylinder Zone Temperature400 to 440°F
Processing Information (Injection Molding)
ValueUnitsTest Method / Conditions
Rear Temperature420 to 460°F
Middle Temperature420 to 460°F
Front Temperature420 to 460°F
Nozzle Temperature420 to 460°F
Processing (Melt) Temperature420 to 460°F
Mold Temperature60 to 90°C
Injection Pressure200 to 800psi
Screw Speed50 to 100rpm
Back Pressure25.0 to 100psi
Injection RateFast-
Cushion0.150 to 1.00in
Physical Form
Pellets
Appearance
Translucent

Regulatory & Compliance

+
Certifications & Compliance
Certifications
RoHS Compliant