product
product
Monprene® OM-10185
Search in

Producer: 
Teknor Apex
Brand: 
Monprene
Monprene OM-10185 is a specialty thermoplastic elastomer, available in NAT and colors, designed for overmolding and co-extrusion applications like grips and anti-skid parts for consumer and industrial products. Monprene OM-10185 is a high hardness, low density, opaque grade that exhibits excellent adhesion to PC, ABS, and PC/ABS.

Monprene® OM-10185

Producer: 
Teknor Apex
Brand: 
Monprene
Monprene OM-10185 is a specialty thermoplastic elastomer, available in NAT and colors, designed for overmolding and co-extrusion applications like grips and anti-skid parts for consumer and industrial products. Monprene OM-10185 is a high hardness, low density, opaque grade that exhibits excellent adhesion to PC, ABS, and PC/ABS.
Take Action

Knowde Enhanced TDS

Expand All

+

Properties

+
Physical Form
Physical Properties
ValueUnitsTest Method / Conditions
Density / Specific Gravity0.94g/cm3ASTM D792A
Melt Mass Flow Rate - MFR (190°C/2.16 kg)7g/10 minASTM D1238
Mechanical Properties
ValueUnitsTest Method / Conditions
Tensile Strength at Break - Across Flow1480psiASTM D412
Tensile Strength at Break - Flow1480psiASTM D412
Tensile Elongation at Break - Across Flow5.6-ASTM D412
Tensile Elongation at Break - Flow2.3-ASTM D412
Tensile Stress at 300% Strain - Across Flow985psiASTM D412
Tensile Stress at 100% Strain - Flow1210psiASTM D412
Tensile Stress at 100% Strain - Across Flow766psiASTM D412
Compression Set (73°F, 22 hr)0.22-ISO 815
Compression Set (158°F, 22 hr)0.94-ASTM D395B
Durometer Hardness (Shore A, sec, Injection Molded)87-ASTM D2240
Tear Strength - Across Flow362lbf/inASTM D624
Tear Strength - Flow312lbf/inASTM D624
Processing Information (Extrusion)
ValueUnitsTest Method / Conditions
Die Temperature380 to 460°F
Cylinder Zone Temperature380 to 460°F
Processing Information (Injection Molding)
ValueUnitsTest Method / Conditions
Drying Time2.0 to 4.0hr
Drying Temperature140°C
Rear Temperature400 to 460°F
Middle Temperature400 to 460°F
Front Temperature400 to 460°F
Nozzle Temperature400 to 460°F
Processing (Melt) Temperature400 to 460°F
Mold Temperature60 to 90°C
Injection Pressure200 to 800psi
Screw Speed50 to 100rpm
Back Pressure25.0 to 125psi
Cushion0.150 to 1.00in
Physical Form
Pellets
Appearance
Opaque

Regulatory & Compliance

+
Certifications & Compliance
Certifications
RoHS Compliant