product
product
Monprene® OM-12235-01
Search in

Producer: 
Teknor Apex
Brand: 
Monprene
Monprene OM-12235-01, available in NAT and colors, is designed for overmolding applications like grips and anti-skid parts for consumer and industrial products. Monprene OM-12235-01 is a low hardness, low density, UV stabilized, opaque grade that exhibits excellent adhesion to PC, ABS, and PC/ABS and is suitable for co-extrusion, extrusion, multi-injection, or injection molding.

Monprene® OM-12235-01

Producer: 
Teknor Apex
Brand: 
Monprene
Monprene OM-12235-01, available in NAT and colors, is designed for overmolding applications like grips and anti-skid parts for consumer and industrial products. Monprene OM-12235-01 is a low hardness, low density, UV stabilized, opaque grade that exhibits excellent adhesion to PC, ABS, and PC/ABS and is suitable for co-extrusion, extrusion, multi-injection, or injection molding.
Take Action

Knowde Enhanced TDS

Expand All

+

Properties

+
Physical Form
Physical Properties
ValueUnitsTest Method / Conditions
Density / Specific Gravity0.94g/cm3ASTM D792A
Melt Mass Flow Rate - MFR (190°C/2.1 kg)0.5g/10 minASTM D1238
Mechanical Properties
ValueUnitsTest Method / Conditions
Tensile Strength at Break - Flow400psiASTM D412
Tensile Strength at Break - Across Flow474psiASTM D412
Tensile Elongation at Break - Across Flow5.5-ASTM D412
Tensile Elongation at Break - Flow4.6-ASTM D412
Tensile Stress at 300% Strain - Flow254psiASTM D412
Tensile Stress at 300% Strain - Across Flow205psiASTM D412
Tensile Stress at 100% Strain - Flow122psiASTM D412
Tensile Stress at 100% Strain - Across Flow104psiASTM D412
Compression Set (158°F, 22 hr)0.61-ASTM D395
Compression Set (73°F, 22 hr)0.17-ASTM D395
Durometer Hardness (Shore A, sec, Injection Molded)38-ASTM D2240
Tear Strength - Flow66lbf/inASTM D624
Tear Strength - Across Flow79lbf/inASTM D624
Processing Information (Extrusion)
ValueUnitsTest Method / Conditions
Die Temperature320 to 360°F
Cylinder Zone Temperature280 to 300°F
Drying Time2.0 to 4.0hr
Drying Temperature140°F
Processing Information (Injection Molding)
ValueUnitsTest Method / Conditions
Drying Time2.0 to 4.0hr
Drying Temperature140°C
Rear Temperature280 to 370°F
Middle Temperature310 to 390°F
Front Temperature310 to 420°F
Nozzle Temperature310 to 430°F
Processing (Melt) Temperature330 to 430°F
Mold Temperature50 to 90°C
Injection Pressure200 to 800psi
Screw Speed50 to 100rpm
Back Pressure25.0 to 125psi
Injection RateModerate-Fast-
Cushion0.150 to 1.00in
Physical Form
Pellets

Regulatory & Compliance

+
Certifications & Compliance
Certifications
RoHS Compliant