product
product
Monprene® PC-12159
Search in

Producer: 
Teknor Apex
Brand: 
Monprene
Monprene PC-12159 is a general purpose thermoplastic elastomer designed for a variety of consumer product applications requiring a soft, rubber-like feel. Monprene PC-12159 is a low density, medium hardness grade that exhibits excellent anti-vibration characteristics. This grade is suitable for both injection molding and extrusion.

Monprene® PC-12159

Producer: 
Teknor Apex
Brand: 
Monprene
Monprene PC-12159 is a general purpose thermoplastic elastomer designed for a variety of consumer product applications requiring a soft, rubber-like feel. Monprene PC-12159 is a low density, medium hardness grade that exhibits excellent anti-vibration characteristics. This grade is suitable for both injection molding and extrusion.
Take Action

Knowde Enhanced TDS

Expand All

+

Properties

+
Physical Form
Physical Properties
ValueUnitsTest Method / Conditions
Density / Specific Gravity0.89g/cm3ASTM D792
Melt Mass Flow Rate - MFR (200°C/5.0 kg)20g/10 minASTM D1238
Mechanical Properties
ValueUnitsTest Method / Conditions
Tensile Strength at Break - Flow1380psiASTM D412
Tensile Strength at Break - Across Flow1810psiASTM D412
Tensile Elongation at Break - Flow5.2-ASTM D412
Tensile Elongation at Break - Across Flow6.4-ASTM D412
Tensile Stress at 300% Strain - Flow902psiASTM D412
Tensile Stress at 300% Strain - Across Flow677psiASTM D412
Tensile Stress at 100% Strain - Flow458psiASTM D412
Tensile Stress at 100% Strain - Across Flow309psiASTM D412
Compression Set (73°F, 22 hr)0.15-ASTM D395
Durometer Hardness (Shore A)62-ASTM D2240, ISO 868
Durometer Hardness (Shore A, sec)60-ASTM D2240, ISO 868
Tear Strength - Flow218lbf/inASTM D624
Tear Strength - Across Flow272lbf/inASTM D624
Processing Information (Extrusion)
ValueUnitsTest Method / Conditions
Die Temperature360 to 400°F
Cylinder Zone Temperature360 to 400°F
Processing Information (Injection Molding)
ValueUnitsTest Method / Conditions
Rear Temperature380 to 420°F
Middle Temperature380 to 420°F
Front Temperature380 to 420°F
Nozzle Temperature380 to 420°F
Processing (Melt) Temperature380 to 420°F
Mold Temperature60 to 90°C
Injection Pressure200 to 800psi
Screw Speed50 to 100rpm
Back Pressure25.0 to 100psi
Cushion0.150 to 1.00in
Physical Form
Pellets
Appearance
Clear or transparent

Regulatory & Compliance

+
Certifications & Compliance
Certifications
RoHS Compliant