product
product
Monprene® PR-13247
Search in

Producer: 
Teknor Apex
Brand: 
Monprene
Monprene PR-13247 NAT is a general purpose thermoplastic elastomer designed for a variety of consumer product applications requiring a soft, rubber-like feel. Monprene PR-13247 NAT is a medium hardness grade suitable for injection molding and extrusion.

Monprene® PR-13247

Producer: 
Teknor Apex
Brand: 
Monprene
Monprene PR-13247 NAT is a general purpose thermoplastic elastomer designed for a variety of consumer product applications requiring a soft, rubber-like feel. Monprene PR-13247 NAT is a medium hardness grade suitable for injection molding and extrusion.
Take Action

Knowde Enhanced TDS

Expand All

+

Properties

+
Physical Form
Physical Properties
ValueUnitsTest Method / Conditions
Density / Specific Gravity0.89g/cm3ASTM D792
Melt Mass Flow Rate - MFR (190°C/2.16 kg)1g/10 minASTM D1238
Mechanical Properties
ValueUnitsTest Method / Conditions
Tensile Strength at Break - Flow850psiASTM D412
Tensile Strength at Break - Across Flow1230psiASTM D412
Tensile Elongation at Break - Flow6.1-ASTM D412
Tensile Elongation at Break - Across Flow6.8-ASTM D412
Tensile Stress at 300% Strain - Flow530psiASTM D412
Tensile Stress at 300% Strain - Across Flow440psiASTM D412
Tensile Stress at 100% Strain - Flow290psiASTM D412
Tensile Stress at 100% Strain - Across Flow220psiASTM D412
Compression Set (73°F, 22 hr)0.16-ASTM D395B
Durometer Hardness (Shore A, sec, Injection Molded)48-ASTM D2240
Tear Strength - Flow180lbf/inISO 34-1
Tear Strength - Across Flow200lbf/inASTM D624
Processing Information (Extrusion)
ValueUnitsTest Method / Conditions
Die Temperature390 to 480°F
Cylinder Zone Temperature360 to 450°F
Processing Information (Injection Molding)
ValueUnitsTest Method / Conditions
Rear Temperature360 to 450°F
Middle Temperature370 to 460°F
Front Temperature380 to 470°F
Nozzle Temperature390 to 480°F
Processing (Melt) Temperature390 to 480°F
Mold Temperature95 to 120°F
Injection Pressure200 to 800psi
Screw Speed50 to 100rpm
Back Pressure25.0 to 100psi
Injection RateFast-
Cushion0.150 to 1.00in
Physical Form
Pellets
Appearance
Translucent

Regulatory & Compliance

+
Certifications & Compliance
Certifications
RoHS Compliant