product
Producer:
Teknor Apex Brand:
Sarlink The Sarlink TPV 4700 Series are very high flow injection molding engineering grades with excellent UV resistance, elasticity, and surface aesthetics designed for demanding automotive applications including window encapsulation and exterior parts. Sarlink® TPV 4775B42 is a black, medium hardness, low density thermoplastic vulcanizate suited for injection molding applications that require superior flow properties.
Sarlink® TPV 4775B42
Producer:
Teknor Apex Brand:
Sarlink The Sarlink TPV 4700 Series are very high flow injection molding engineering grades with excellent UV resistance, elasticity, and surface aesthetics designed for demanding automotive applications including window encapsulation and exterior parts. Sarlink® TPV 4775B42 is a black, medium hardness, low density thermoplastic vulcanizate suited for injection molding applications that require superior flow properties.
Take Action
Knowde Enhanced TDS
Identification & Functionality
Polymer Name
Technologies
Product Families
Features & Benefits
Applications & Uses
Markets
Plastics & Elastomers End Uses
Plastics & Elastomers Processing Methods
Properties
Physical Form
Physical Properties
| Value | Units | Test Method / Conditions | |
| Density / Specific Gravity | 0.91 | g/cm3 | ASTM D792 |
| Density | 0.91 | g/cm3 | ISO 1183 |
Mechanical Properties
| Value | Units | Test Method / Conditions | |
| Tensile Strength at Break - Across Flow | 914 | psi | ASTM D412 |
| Tensile Strength at Break - Flow | 841 | psi | ASTM D412 |
| Tear Strength - Across Flow | 180 | lbf/in | ISO 34-1 |
| Tensile Elongation at Break - Flow | 4.1 | - | ASTM D412 |
| Tensile Elongation at Break - Across Flow | 4.7 | - | ASTM D412 |
| Tensile Stress at Break - Flow | 841 | psi | ISO 37 |
| Tensile Stress at 100% Strain - Across Flow | 464 | psi | ISO 37 |
| Tensile Stress at 100% Strain - Flow | 493 | psi | ISO 37 |
| Tensile Stress at Break - Across Flow | 914 | psi | ISO 37 |
| Compression Set (73°F, 22 hr) | 0.24 | - | ASTM D395B |
| Compression Set (158°F, 22 hr) | 0.39 | - | ISO 815 |
| Compression Set (257°F, 70 hr) | 0.56 | - | ASTM D395 |
| Durometer Hardness (Shore A, sec, Injection Molded) | 76 | - | ASTM D2240 |
| Durometer Hardness (Shore A, sec, Extruded) | 74 | - | ASTM D2240 |
| Shore Hardness (Shore A, sec, Injection Molded) | 76 | - | ISO 868 |
| Shore Hardness (Shore A, sec, Extruded) | 74 | - | ISO 868 |
Aging
| Value | Units | Test Method / Conditions | |
| Change in Tensile Strength in Air - Across Flow (100% Strain, 275°F, 1000 hr)) | 0.03 | - | ASTM D573 |
| Change in Tensile Strength in Air - Across Flow (100% Strain 275°F, 1000 hr)) | 0.03 | - | ISO 188 |
| Change in Tensile Strength in Air - Across Flow (100% Strain, 302°F, 168 hr)) | 0.02 | - | ASTM D573 |
| Change in Tensile Strength in Air - Across Flow (100% Strain 302°F, 168 hr)) | 0.02 | - | ISO 188 |
| Change in Tensile Strength in Air - Across Flow (302°F, 168 hr)) | -0.19 | - | ASTM D573 |
| Change in Tensile Strength in Air - Across Flow (275°F, 1000 hr)) | -0.18 | - | ASTM D573 |
| Change in Ultimate Elongation in Air - Across Flow (302°F, 168 hr)) | -0.24 | - | ASTM D573 |
| Change in Ultimate Elongation in Air - Across Flow (275°F, 1000 hr)) | -0.28 | - | ASTM D573 |
| Change in Tensile Strain at Break in Air - Across Flow (302°F, 168 hr)) | -0.24 | - | ISO 188 |
| Change in Tensile Strain at Break in Air - Across Flow (275°F, 1000 hr)) | -0.28 | - | ISO 188 |
| Change in Shore Hardness in Air (Shore A, 302°F, 168 hr) | 1 | - | ISO 188 |
| Change in Shore Hardness in Air (Shore A, 275°F, 1000 hr) | -2 | - | ISO 188 |
| Change in Durometer Hardness in Air (Shore A, 302°F, 168 hr) | 1 | - | ASTM D573 |
| Change in Durometer Hardness in Air (Shore A, 275°F, 1000 hr) | -2 | - | ASTM D573 |
| Change in Volume (257°F, 70 hr, in IRM 903 Oil)) | 0.73 | - | ASTM D471 |
Processing Information (Injection Molding)
| Value | Units | Test Method / Conditions | |
| Rear Temperature | 356 to 401 | °F | |
| Middle Temperature | 356 to 401 | °F | |
| Front Temperature | 356 to 401 | °F | |
| Nozzle Temperature | 365 to 410 | °F | |
| Processing (Melt) Temperature | 365 to 410 | °F | |
| Mold Temperature | 50 to 131 | °F | |
| Screw Speed | 100 to 200 | rpm | |
| Back Pressure | 14.5 to 145 | psi |
Color
Black
Physical Form
Pellets
Regulatory & Compliance
Certifications & Compliance
Certifications
RoHS Compliant
Packaging & Availability
Regional Availability
Regional Availability
Follow
News