Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Product Characterestics
ADVANCENE™ EM-4810-AAH HDPE Resin is ideal for blow molding containers of > 80 liters closed head shipping containers and other similar parts. The broad distribution also provides outstanding environmental stress crack resistance (ESCR) at a good rigidity. Because of these characteristics, a wide variety of products, such as industrial chemicals, latex paints, printing inks, foodstuffs. and other chemical specialties may be packaged in containers produced from this resin. The smooth surface of molded parts is readily treated and printed for high quality applications.
Main Characteristics;
• Outstanding environmental stress crack resistance.
• Excellent parison melt strength / low sag.
• extrudability / processability.
• Good rigidty.
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Physical Properties
- Mechanical Properties
- Thermal Properties
Value | Units | Test Method / Conditions | |
Density | 0.948 | g/cm3 | ASTM D792 |
Melt Index (190ºC/21.6 kg) | 10 | g/10min | ASTM D1238. ISO 1133 |
Enviromental Stress-Craking Resistance 50ºC, 100%lgepal,F50 | min.1500 | hr | ASTM D1693 |
Value | Units | Test Method / Conditions | |
Tensile Strength at Yield | 22.8 | Mpa | ASTM D638' ISO 527 |
Tensile Strength at Break | 36.5 | Mpa | ASTM D638' ISO 527 |
Tensile Elongation at Yield | 6 | % | ASTM D638' ISO 527 |
Tensile Elongation at Break | 900 | % | ASTM D638' ISO 527 |
Flexural Mcxfulus — 2% Secant | 855 | Mpa | ASTM D790B'. ISO 178 |
Tensile impact Strength | 462 | KJ/m2 | ASTM D1822'-. ISO 8256 |
Durometer Hardness | 57 | Shore D | ASTM D2240,ISO/IEC 17025 ;1999 |
Value | Units | Test Method / Conditions | |
Deflection Temperature under load 66 psi (0.45 MPa) ,Unannealed | 66 | ºC | ASTM D648', ISO 75 |
Brittleness Temperature | max.-76 | ºC | ASTM D7461, ISO-974 (E) |
Vicat Softening Temperature | 127 | ºC | ASTM Dl 525, ISO 306 |
Melting Temperature (DSC) | 130 | ºC | ASTM D3418, ISO 3146 |
Peak Crystallization Temperature(DSC) | 114 | ºC | ASTM D3418, ISO 3146 |
Regulatory & Compliance
- Certifications & Compliance
- Recycling
The product is suitable for recycling using modern methods of shredding and cleaning. In-house production waste should be kept clean to facilitate direct recycling.
Safety & Health
- Safety
The product is not classified as a hazardous mixture.
Dust and fines from the product carry a risk of dust explosion. All equipment should be properly earthed. Inhalation of dust should be avoided as it may cause irritation of the respiratory system. small amounts of fumes are generated during prcHü•essing of the product. Proper ventilation is therefore required. A Safety Information Sheet is available on request. Please contact your ETHYDCO representative for more details on various aspects of safety, recovery and disposal of the product.
Packaging & Availability
- Packaging Type
- Regional Availability
- Availability
This product is supplied in 25 kg bags in secured pallets of 60 bags (1.5CK) MT net).
It is also supplied in jumbo bags of 1000 kg capacity.
Storage & Handling
- Storage
The product should be stored in dry conditions at temperatures below 500C and protected from UV-light. Improper storage can initiate degradation, which results in (Ylour generation and color changes and can have negative effects on the physical properties of this product. More information on storage can be found in safety Information Sheet for this prcxiuct.