Products

Marshall Additive Technologies FD409 is a reactive synergist blend specially formulated to provide a good balance of flame retardant performance and reduced cost when used as a partial Antimony Trioxide replacement. This product is applicable to PVC, CPE, and a wide range of polymer systems where the flame retardant is bromine or chlorine based. Depending on the specific formulation, it is typically possible to replace between 30 and 50% of Antimony Trioxide.

Marshall Additive Technologies SDAOM 100% Ammonium Octamolybdate smoke suppressant.

Marshall Additive Technologies FD335 is a reactive synergist blend specially formulated to provide the maximum flame retardant performance when used as an Antimony Trioxide replacement. This product is applicable to PVC, CPE, and a wide range of polymer systems where the flame retardant is bromine or chlorine based. Depending on the specific formulation, it is typically possible to replace between 50 and 100% of Antimony Trioxide.

provides a cost-effective way to flame retard and smoke suppress plastics, rubber and other polymer systems. It is alumina trihydrate and has good flowability and wetout. H-TEC™ 1000 is used for flexible and rigid PVC, nitrile rubbers, neoprene, polyolefins, EPDM, SBR, EPR, latexes, urethanes, EVA copolymers, unsaturated polyesters and other polymer systems.

A206 is a Ground ATH is used in Pultrusion, BMC.

Pulpro PP-10 is a near white calcium carbonate designed for use as a resin filler in pultrusion, caulks, adhesives and sealants and/or in fiberglass spray up manufacturing. R.J. Marshall offers 4 distinct sizes. Pulpro3, a three micron calcium carbonate. Pulpro8, an eight micron calcium carbonate. Pulpro10, a ten micron calcium carbonate and Pulpro20, a twenty micron calcium carbonate product.

Pulpro PP-8 is a near white calcium carbonate designed for use as a resin filler in pultrusion, caulks, adhesives and sealants and/or in fiberglass spray up manufacturing. R.J. Marshall offers 4 distinct sizes. Pulpro3, a three micron calcium carbonate. Pulpro8, an eight micron calcium carbonate. Pulpro10, a ten micron calcium carbonate and Pulpro20, a twenty micron calcium carbonate product.

Pulpro PP-3 is a near white calcium carbonate designed for use as a resin filler in pultrusion, caulks, adhesives and sealants and/or in fiberglass spray up manufacturing. R.J. Marshall offers 4 distinct sizes. Pulpro3, a three micron calcium carbonate. Pulpro8, an eight micron calcium carbonate. Pulpro10, a ten micron calcium carbonate and Pulpro20, a twenty micron calcium carbonate product.

A204 is a Fine Ground ATH is used in Vinyl, SMC, PVC, Pultrusion.

C-TEC™ CTZB400 is typically used as a formulating additive to increase char strength, reduce smoke, and to provide afterglow suppression.

Marshall Additive Technologies FDAO 100% antimony trioxide synergist for halogenated flame retardant systems.

AH255 is a Coarse Ground ATH is used in Composites.

Pulpro PP-20 is a near white calcium carbonate designed for use as a resin filler in pultrusion, caulks, adhesives and sealants and/or in fiberglass spray up manufacturing. R.J. Marshall offers 4 distinct sizes. Pulpro3, a three micron calcium carbonate. Pulpro8, an eight micron calcium carbonate. Pulpro10, a ten micron calcium carbonate and Pulpro20, a twenty micron calcium carbonate product.

AR361A is 100% expanded Aramid. The high technical properties of expanded Aramid provide improved and rapid dispersion in compounds. High temperature, high tensile and impact strengths are coupled with chemical resistant high thixotrophy fibers.

A208 is a Ground ATH is used in BMC, Carpet Backing, Rubber.

A202 is a Fine Ground ATH is used in Adhesives, Sealants, Electrical, PVC.

AH290 is a Ground ATH is used in Yarn, Mills, SMC.

AH270 is a Coarse Ground ATH is used in Latex, Foam, Neoprene.

AR990 is a blend of expanded Aramid fibers with talc. The high technical properties of expanded Aramid blends provide economical rapid dispersion in compounds. High temperature, high tensile and impact strengths are coupled with chemical resistant high thixotrophy fibers.

AH430 is a Ground ATH is used in BMC, FRP, Pultrusion.

A212 is a Ground ATH is used in SMC, BMC.

AH330 is a Ground ATH is used in Electronics, Glassware, Spray Up.

AH280 is a Ground ATH is used in Mass Transit, Carpet Backing.

CS265X is a ground dihydrate grade of calcium sulfate containing 20.1% water of hydration. The waters of hydration provide good flame and smoke suppression in a variety of room temperature cured thermoset composite applications.

A210 is a Ground ATH is used in SMC, BMC.

AR59CB is a blend of expanded Aramid fibers with calciumcarbonate. The high technical properties of expanded Aramidblends provide economical rapid dispersion in compounds.High temperature, high tensile and impact strengths arecoupled with chemical resistant high thixotrophy fibers.