Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Cosmetic Ingredients
Food Ingredients
Knowde for Suppliers
Browse
Sample
Chat
Request
Search
Products
The R.J. Marshall Company
All The R.J. Marshall Company
Search products
Matching Product Categories
Elastomers
Plastics
Markets
Labeling Claims
Physical Form
All Filters
11 Products found on The R.J. Marshall Company
Most Viewed
SDS
With SDS
TDS
With TDS
H-TEC™ 1000
Chemical Name:
Alumina Trihydrate (ATH)
Functions:
Smoke Suppressant, Flame Retardant
Chemical Family:
Aluminum Compounds
Compatible Polymers & Resins:
Nitrile Butadiene Rubber (NBR), Ethylene Vinyl Acetate (EVA), Ethylene Propylene Diene Monomer (EPDM), Polyvinyl Chloride (PVC), Unsaturated Polyester (UPE), Polyurethanes (PU), Styrene Butadiene Rubber (SBR)
provides a cost-effective way to flame retard and smoke suppress plastics, rubber and other polymer systems. It is alumina trihydrate and has good flowability and wetout. H-TEC™ 1000 is used for flexible and rigid PVC, nitrile rubbers, neoprene, polyolefins, EPDM, SBR, EPR, latexes, urethanes, EVA copolymers, unsaturated polyesters and other polymer systems.
The R.J. Marshall Company FD335
Functions:
Smoke Suppressant, Flame Retardant
Chemical Family:
Chemical Mixtures & Blends
Compatible Polymers & Resins:
Polyvinyl Chloride (PVC)
Marshall Additive Technologies FD335 is a reactive synergist blend specially formulated to provide the maximum flame retardant performance when used as an Antimony Trioxide replacement. This product is applicable to PVC, CPE, and a wide range of polymer systems where the flame retardant is bromine or chlorine based. Depending on the specific formulation, it is typically possible to replace between 50 and 100% of Antimony Trioxide.
The R.J. Marshall Company SDAOM
Functions:
Smoke Suppressant, Flame Retardant
Chemical Family:
Ammonium Compounds
Compatible Polymers & Resins:
Polyvinyl Chloride (PVC)
Processing Methods:
Extrusion
Marshall Additive Technologies SDAOM 100% Ammonium Octamolybdate smoke suppressant.
The R.J. Marshall Company FD409
Functions:
Smoke Suppressant, Flame Retardant
Chemical Family:
Chemical Mixtures & Blends
Compatible Polymers & Resins:
Polyvinyl Chloride (PVC)
Marshall Additive Technologies FD409 is a reactive synergist blend specially formulated to provide a good balance of flame retardant performance and reduced cost when used as a partial Antimony Trioxide replacement. This product is applicable to PVC, CPE, and a wide range of polymer systems where the flame retardant is bromine or chlorine based. Depending on the specific formulation, it is typically possible to replace between 30 and 50% of Antimony Trioxide.
The R.J. Marshall Company A202
Chemical Name:
Alumina Trihydrate (ATH)
Functions:
Flame Retardant
Chemical Family:
Trihydrates, Aluminum Compounds
Compatible Polymers & Resins:
Polyvinyl Chloride (PVC)
A202 is a Fine Ground ATH is used in Adhesives, Sealants, Electrical, PVC.
The R.J. Marshall Company FSD479
Functions:
Smoke Suppressant, Flame Retardant
Chemical Family:
Chemical Mixtures & Blends
Labeling Claims:
Antimony-free
Compatible Polymers & Resins:
Polyvinyl Chloride (PVC), Polyethylenes (PE)
Marshall Additive Technologies FSD479 is an antimony free proprietary inorganic blend flame retardant synergist for use with halogen based flame retardant polymer compounds where Zinc Hydroxy Stannate is used as the primary synergist. It allows the formulator to reduce the amount of the expensive Zinc Hydroxy Stannate while retaining flammability performance and hence provide an overall cost saving. This product is applicable to PVC, CPE, and a wide range of polymer systems where the flame retardant is bromine or chlorine based.
The R.J. Marshall Company SD890
Functions:
Smoke Suppressant, Flame Retardant
Chemical Family:
Chemical Mixtures & Blends
Compatible Polymers & Resins:
Polyvinyl Chloride (PVC)
Marshall Additive Technologies SD890 is a reactive smoke suppressant blend specially formulated to provide the maximum reduction in smoke generation at the lowest possible cost when replacing molybdate based additives in PVC compounds. Specifically, work has been done which shows that it is possible to replace 100% of Ammonium Octamolybdate while achieving a further improvement in smoke suppression of a typical PVC plenum jacketing formulation and small gain in flame retardancy.
The R.J. Marshall Company FD440
Functions:
Smoke Suppressant, Flame Retardant
Chemical Family:
Chemical Mixtures & Blends
Labeling Claims:
Antimony-free
Compatible Polymers & Resins:
Polyvinyl Chloride (PVC), Polyethylenes (PE)
Marshall Additive Technologies FD440 is an antimony free inorganic synergist for halogenated flame retardant systems. FD440 can allow the formulator to significantly reduce the antimony trioxide level in a formula while providing equivalent performance at a reduced cost. This product is applicable to PVC, CPE, and a wide range of polymer systems where the flame retardant is bromine or chlorine based.
C-TEC™ CTZB400
Chemical Name:
Zinc borate
Functions:
Smoke Suppressant, Flame Retardant
Chemical Family:
Zinc Salts, Zinc & Zinc Compounds
Compatible Polymers & Resins:
Polyethylenes (PE), Polyamides, Polyvinyl Chloride (PVC), Thermoplastic Elastomers (TPE), Epoxies (EP)
C-TEC™ CTZB400 is typically used as a formulating additive to increase char strength, reduce smoke, and to provide afterglow suppression.
The R.J. Marshall Company A204
Chemical Name:
Alumina Trihydrate (ATH)
Functions:
Flame Retardant
Chemical Family:
Trihydrates, Aluminum Compounds
Compatible Polymers & Resins:
Vinyl Esters, Polyvinyl Chloride (PVC)
A204 is a Fine Ground ATH is used in Vinyl, SMC, PVC, Pultrusion.
The R.J. Marshall Company HT1000
Chemical Name:
Alumina Trihydrate (ATH)
Functions:
Flame Retardant
Chemical Family:
Trihydrates, Aluminum Compounds
Compatible Polymers & Resins:
Polyvinyl Chloride (PVC), Nitrile Butadiene Rubber (NBR)
HT1000 is a Fine ATH is used in Wire/Cable (Insulation/Sheathing), PVC/NBR Foam.