Red Ice 611LV is specifically designed to eliminate compound “dry-out” problems due to the continuous exposure temperatures exceeding 200 degree celcius. This non-silicone thermal compound specially formulated for applications with continuous temperatures exceeding 200 degree celcius and intermittent temperatures up to 360 degree celcius. It shown outstanding stability and efficient heat transfer for the full operational life of your hardware. Red Ice 611LV is low viscosity, screen printable, high temperature stable thermal grease. It is formulated with high temperature stable non-silicone fluids and unique fillers. This compound provides minimal out gassing, high thermal conductivity, low bleed and high temperature stability.

Product Type: Thermal Grease

Application Area: Diodes, Heaters, LEDs, Power Transistor, Resistors, Semiconductors, Sensor Module, Sensors

Features: Cost Effective, Easy To Dispense, Excellent Dielectric Properties, Excellent Wetting Behaviour, Good Stability, Good Thermal Stability, High Temperature Performance, High Temperature Resistance, Low Viscosity, Screen Printable

Technical Data Sheet

Knowde Enhanced TDS

Identification & Functionality

Product Type
Type
Silicone Free

Features & Benefits

Labeling Claims
Key Features & Benefits
  • Rated Up to 360C (680F)
  • Low Out-Gassing requirements
  • Non-Silicone Advantages, No creep or contamination
  • Re-workable, Low Bond Line Thickness

Applications & Uses

Applications
  • Heater cartridges, heating coil/plate, tank heater.
  • Thermal sensors, TEC modules, Thermal Wells
  • High power IGBT’s, LED
  • Power Transistors, Diodes, Power Resistors

Properties

Color
Typical Properties
ValueUnitsTest Method / Conditions
Viscosity (50 rpm, 25°C)100.0PaSHelipath
Specific Gravity3.0ASTM D792
Operating Temperature Range-55 to 360°C
Thermal Properties
ValueUnitsTest Method / Conditions
Thermal Conductivity0.8W/m-KASTM D5487
Thermal Resistance0.06°C-in²/WASTM D5488
Typical Electrical Properties
ValueUnitsTest Method / Conditions
Breakdown Voltage15.0KV/mmASTM D167
Dissipation Factor0.00161KHzASTM D168
Volume Resistivity10¹⁴Ohm-cmASTM D257

Packaging & Availability

Availability
  • Syringes (3cc, 10cc, 30cc). Jars (8 oz & 1 Kg). Cartridges (6 oz. Semco & 300cc).
  • 1 gallon & 5 gallon pail.

Storage & Handling

Shelf Life
5 years at 25°C