Products

Toray Amilan® CM3001G-30 is a Polyamide 66 (Nylon 66) product filled with 30% glass fiber. It is available in Asia Pacific, Europe, or North America. Typical application includes automotive. Primary characteristic includes flame rated.

Toray Toray MicroPly™ TCF4045 is a low dielectric, low density epoxy syntactic film. The material displays both good mechanical and dielectric properties. Toray MicroPly™ TCF4045’s base resin chemistry features low moisture absorption with good high temperature properties. 177°C (350°F) Cure, Low Dielectric Epoxy Syntactic Film.

Amilan® CM3001-N is a Polyamide 66 (Nylon 66) product. It is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.

Toray EX-1515 cyanate ester prepreg resin system is unique in the industry in that it is able to achieve an extremely high level of cure conversion after a 121°C (250°F) cure. This level of conversion provides optimal mechanical properties, high radiation resistance, low moisture absorption, and low outgassing while retaining unparalleled toughness, a low 118°C (244°F), stress-free temperature, and long out time. The resin system excels in its ability to resist microcracking, even when subjected to thermal cycling and high levels of radiation exposure. EX-1515 also displays low dielectric and low loss values which makes it outstanding for radome and antenna Applicationss. EX-1515 can be post cured, freestanding, to increase thermal performance for temperature-critical structures. 107–121°C (225–250°F) Cure Toughened Cyanate Ester

Toray RS-36 is an advanced modified epoxy system for structural composite Applicationss. RS-36 offers an excellent balance of mechanical properties, low moisture absorption, high glass transition temperatures, and a range of processing options. A higher Tg version, RS-36-1, with similar mechanical properties, is available. 177°C (350°F) Cure Epoxy Resin System

Toray Toray MicroPly™ EX-1541 cyanate ester syntactic foam is extremely unique in the industry due to its coupling of extremely low density and good structural properties. If packed well, the material does not require pressing during cure to achieve its mechanical properties and is easily machined to shape if required. Toray MicroPly™ EX-1541 is simply packed or injected into tooling cavities and can also be extruded with the proper tooling. Toray MicroPly™ EX 1541’s inherently low dielectric/low loss performance makes it ideal for radomes, antennas, and radar transparent structures, while its cyanate ester backbone chemistry assures low moisture absorption and low outgassing. These latter two features coupled with Toray MicroPly™ EX-1541’s low isotropic CTE make it ideal for spacecraft and other dimensionally stable structures and tooling. Toray MicroPly™ EX-1541 can be accurately machined and hand-finished. Sanding and fairing is easily performed on cured Toray MicroPly™ EX-1541 and is similar to working with balsa wood. Variants from 176–384 kg/m³ (11–24 lb/ft³) (pcf) are available.

Toray E745 is a 135°C (275°F) cure toughened epoxy component prepreg. E745 has been developed for impact structures and other mechanically demanding structural Applicationss. E745 can be impregnated into a range of fiber and fabric types. 135°C (275°F) Cure Mid Temperature Curing Toughened Epoxy Component Prepreg.

Toray’s TC250 offers an excellent balance of toughness, mechanical properties, and hot/wet performance. It is easily processed via vacuum bag/oven, autoclave, or press curing operations. Although TC250 is a 130°C (265°F) cure system, it can be post cured for a higher dry and wet Tg, which enhance the product’s elevated temperature performance. TC250 can also be cured or freestanding post cured to 177°C (350°F) to increase its high temperature performance. TC250 is available with virtually all fiber reinforcements in uni-directional tape, slit unidirectional tape, woven, and non-woven prepreg forms. 130°C (265°F) Cure, Toughened Epoxy Resin System

Toray Amilan® CM1021 FS is a Polyamide 6 (Nylon 6) product. It can be processed by extrusion and is available in Asia Pacific, Europe, or North America.

Toray EX-1545 is a 2-part highly modified, tough cyanate ester resin formulated to have extremely low viscosity at room temperature. The low viscosity allows RTM processing with minimal heat to the resin, which extends resin pot life and mold filling time for difficult and/or large RTM’d structures. EX-1545 displays both excellent mechanical and thermal properties in addition to low moisture absorption. Finally, the material is unique in that it develops full mechanical properties from its initial 177°C (350°F) cure. 177°C (350°F) Curing Toughened Cyanate Ester for RTM Applicationss

Toray TC346 is a high temperature epoxy component prepreg developed for structural Applicationss within Formula 1 and high performance automotive. Toray TC346 is designed to deliver enhanced compression properties to manufactured parts while maintaining a good fracture toughness. When exposed to elevated temperature environments, TC346 composites demonstrate excellent retention of mechanical performance.

Toray Amilan® CM3001G-45 is a Polyamide 66 (Nylon 66) product filled with 45% glass fiber. It is available in Asia Pacific, Europe, or North America. Primary characteristics are flame rated.

Amilan® CM1017 is a Polyamide 6 (Nylon 6) product. It is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.

Toyolac® PX10-X07 is a Polycarbonate + ABS (PC+ABS) product. It is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.

Toray Toray CFRT® TL-6000 is a reinforced thermoplastic composite that blends the benefits of a thermoplastic polymer matrix with woven carbon fibers for enhanced performance. Within the product range, 2 layer (MOD1, 2L), 3 layer (3L), or 4 layer (4L) products are available, all ultra-thin, lightweight, and resilient. This material can be drilled, ground, polished and adjusted after being formed with a heated gun. TL-6000 has a smooth high-gloss finish and transparent surface to show woven carbon fiber.

Toray Amilan® CM1021TM is a Polyamide 6 (Nylon 6) product. It can be processed by extrusion and is available in Asia Pacific, Europe, or North America. Typical application includes Fabrics/Fibers. .

Toray Toyolac® VX10G20 is an Acrylonitrile Butadiene Styrene + PBT (ABS+PBT) product filled with 20% glass fiber. It is available in Asia Pacific, Europe, or North America. Primary characteristic is flame rated.

Toray TC380 sets a new benchmark for toughened epoxy prepreg systems. TC380 is extremely tough with an excellent balance of OHC, OHT, CAI, and GIC/GIIC properties. It features low moisture absorption with outstanding hot/wet mechanical properties to 121°C (250°F). TC380 is optimized for out-of-autoclave/vacuum bag only (OOA/VBO) cures, facilitating construction of large or complex composite parts and assemblies. Unlike some other highly toughened systems, there is no need to sequence the prepreg front and back face, assuring robustness and simplifying lay-up. TC380 out life are 21 and 28 days, respectively. 180°C (356°F) Cure, Toughened Epoxy Resin System

Toray Amilan® CM1011G-30 is a Polyamide 6 (Nylon 6) product filled with 30% glass fiber. It is available in Asia Pacific, Europe, or North America. Typical application includes Automotive. Primary characteristics are flame rated.

Toray Amilan® CM1011G-15 is a Polyamide 6 (Nylon 6) product filled with 15% glass fiber. It is available in Asia Pacific, Europe, or North America. Typical application includes Automotive. Primary characteristics are flame rated.

Toray Toyolac® 100G-10 is an Acrylonitrile Butadiene Styrene (ABS) product filled with 10% glass fiber. It is available in Asia Pacific, Europe, or North America. Primary characteristic includes flame rated.

Toray TC522 is a highly toughened modified epoxy resin system. TC522 displays outstanding Compression After Impact (CAI), setting it apart from other resins designed for dielectric Applicationss. TC522 exhibits excellent mechanical and thermal properties, along with very low moisture absorption. TC522 low dielectric constant and loss tangent along with very high CAI make it ideal for radome and antenna Applicationss in environments where impact and high mechanical properties are required. 180°C (356°F) Cure Highly Toughened Modified Epoxy

Toray Amilan® CM1011G-45 is a Polyamide 6 (Nylon 6) product filled with 45% glass fiber. It is available in Asia Pacific, Europe, or North America. Primary characteristics are flame rated.

Toray EX-1510 is a highly modified two-part toughened cyanate ester resin formulated to have extremely low viscosity at room temperature. Its viscosity allows resin transfer molding (RTM) to take place without the Applications of heat to the resin. This feature provides long resin pot life and mold filling time for difficult and/or large RTM’d structures and helps increase manufacturing efficiency and reduces waste. EX-1510 displays excellent mechanical and thermal properties in addition to low moisture absorption. Finally, the material is unique in that it develops full mechanical properties from its initial 177°C (350°F) cure. A freestanding post cure increases the heat resistance.

Toray Amilan® CM3001G-15 is a Polyamide 66 (Nylon 66) product filled with 15% glass fiber. It is available in Asia Pacific, Europe, or North America. Typical application includes Automotive. Primary characteristics are flame rated.

8020 Rapi-Ply is a Outstanding vacuum-bag-only (out-of-autoclave) processing capability. No debulking required off Bi-layer form facilitates fast lay-up

Aluminum Flex-Core® honeycomb utilizes either 5052 or 5056 alloy foil material and is available in two cell sizes. FlexCore® has unique cell configurations that significantly reduce anticlastic behavior and permit small radii of curvature without deformation of the cell walls or loss of mechanical properties. Aluminum Flex-Core® has been developed to allow the designer and fabricator freedom in the utilization of honeycomb for components requiring simple and compound curvatures. Highly contoured sandwich panels such as leading edges and flaps, nacelles, fairings, doors, and access covers, and other parabolic, spherical, and cylindrical shapes are prime Flex-Core® candidates. Duplicate die model and control tooling for aerospace use are also examples of Flex-Core® Applicationss. As with standard aluminum honeycomb, Flex-Core® provides controlled crush characteristics without rebound and thus curved energy absorption units become feasible and economical.

Toray TC350-1 is a toughened matrix for structural advanced composite Applicationss. TC350-1 offers an excellent balance of toughness, mechanical property translation, and hot/wet performance. It is easily processed via out-ofautoclave or press curing operations. TC350-1 develops a 191°C (376°F) Tg after a 177°C (350°F) cure, which coupled with low moisture absorption translates into excellent hot/wet performance. TC350-1 is available with virtually all fiber reinforcements in uni-directional tape, slit uni-directional tape, woven, and non-woven prepreg formats. 177°C (350°F) Cure, Toughened Epoxy Prepreg.

Toray Toray Cetex® TC1320 New is a high-end thermoplastic composite material, utilizing the semi-crystalline thermoplastic polymer PEKK for excellent elevated service performance. Qualified for use in aerostructures, this material has a proven applicability in aerospace. Toray Cetex® TC1320 offers outstanding mechanical performance and good hot/wet strength. The semi-crystalline nature of the resin ensures an excellent resistance to chemicals and solvents, and an equally superior performance in flammability properties. Toray Cetex® TC1320 is available as a UD tape, a fabric prepreg, and as reinforced thermoplastic laminates (RTLs) of varying thicknesses. RTLs can be equipped with lightning strike protection, and carbon reinforced RTLs can be supplied with a thin glass top layer to protect a partly metallic assembly against galvanic corrosion. Glass scrim is also applicable in structures made from UD tape. PEKK (PolyEtherKetoneKetone) Thermoplastic Resin System.

Toray Toyolac® 600-309 is an Acrylonitrile Butadiene Styrene (ABS) product. It can be processed by extrusion and is available in Asia Pacific, Europe, or North America. Primary characteristic includes flame rated.

Toray Toyolac® 600-X06 is an Acrylonitrile Butadiene Styrene (ABS) product. It can be processed by extrusion and is available in Asia Pacific, Europe, or North America. Primary characteristic includes flame rated.

Toray RS-1 is an epoxy prepreg resin that provides an excellent balance of mechanical properties, toughness, and modulus. RS-1 has been evaluated and qualified in areas ranging from marine to aerospace and dielectric structures. RS-1 is also available in a lower temperature curing formulation 80°C (176°F).

Toray RS-17B is a modified epoxy resin that delivers extremely low moisture absorption while providing excellent mechanical properties, toughness, and modulus. RS-17B is a flexible cure system that may be cured from 135°C to 177°C (275°F to 350°F). RS-17B has a long spaceflight heritage. 135°C–177°C (275°F–350°F) Cure Epoxy.

Toray Toyolac® 100G-30Toyolac® 100G-30 is an Acrylonitrile Butadiene Styrene (ABS) product filled with 30% glass fiber. It is available in Asia Pacific, Europe, or North America. Primary characteristic includes flame rated.Toyolac® 100G-30Toyolac® 100G-30 is an Acrylonitrile Butadiene Styrene (ABS) material filled with 30% glass fiber. It is available in Asia Pacific or Europe.Important attributes of Toyolac® 100G-30 are flame rated RoHS Compliant.

Toray Amilan® CM3211G35UB1 is a Polyamide 66 (Nylon 66) product filled with 35% glass fiber. It is available in Asia Pacific, Europe, or North America. Primary characteristics are flame rated.

Toray 8020 is a new generation of toughened epoxy resin systems offering a balance of mechanical properties and excellent surface finish. The resin system has been developed to offer a long out life and flexible cure schedules and can be applied to a wide range of high performance fibers. Toray 8020 is compatible for co-cure with Toray’s resin film, Toray 8020, and Toray’s syntactic core, Toray MicroPly™ SC8020A.