Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Sustainability
Products
Cosmetic Ingredients
Food Ingredients
Knowde for Suppliers
Browse
Sample
Chat
Request
Search
category
Agriculture & Feed
Products
TSE Industries Inc.
All TSE Industries Inc.
Search products
Agriculture & Feed
Applications
Agricultural Films
Chemical Family
Labeling Claims
All Filters
3 Products found on TSE Industries Inc. in
Agriculture & Feed
Most Viewed
SDS
With SDS
TDS
With TDS
Thanecure® T9 SuperFine
Chemical Name:
Tolylene diisocyanate
Functions:
Adhesion Promoter
Compatible Polymers & Resins:
Polyesters, Polyurethanes (PU), Polyvinyl Chloride (PVC)
Thanecure® T9 Superfine is the dimer of 2,4-toluene diisocyanate (TDI). It is a polyfunctional isocyanate used as a vulcanizing agent for specialty millable polyurethane rubbers, as a crosslinker for adhesives and as an adhesion promoter for rubber-to-fabric bonding.
Millathane® 26
Polymer Name:
Thermoplastic Polyurethane (Polyether based)
Processing Methods:
Compression Molding
End Uses:
Rubber Roller, Hoses, Gaskets, Footwear, Belts & Belt Repair
Features:
Food Contact Acceptable, Good Compression Set, Heat Resistance, Abrasion Resistant, High Hydrolysis Resistance, Excellent Strength, Oil Resistant
Millathane® 26 is often used in non-food handling applications, including rollers, because of its hydrolysis resistance and good strength properties. The inherent hydrolysis resistance of polyether urethanes makes it more forgiving in steam autoclave cure processes than polyester grades.
Millathane® UV
Polymer Name:
Thermoplastic Polyurethane (Polyether based)
Processing Methods:
Extrusion
End Uses:
Conduit, Hoses, Cables, Belts & Belt Repair
Features:
Low Temperature Curing
Millathane® UV is an ultra-violet curable millable polyurethane compound typically used with Millathane® 97, but other Grades can be used as well. Millable polyurethane extrusions can be continuously cured and products molded using UV light without the use of ovens, microwaves or salt bath units. (Patent Pending) These curable compounds can be extruded or calendered onto fabric or as an unsupported sheet and then continuously cured by passing them through a UV-curing conveyor belt chamber. Molded parts can be press-cured using special transparent molds to allow curing with UV light, or can be cured in a UV chamber. Time of irradiation varies with the nature and type of material, the type and concentration of other ingredients, and the type and power of the light source. They are great for extruding hollow tubing and other continuous shapes, such as bars, rods, L-channels, U-channels, square tubing, and the like. It’s great for extruded protective covering over all types of cables, hoses, and protective conduit.