Products

Millathane® 26 is often used in non-food handling applications, including rollers, because of its hydrolysis resistance and good strength properties. The inherent hydrolysis resistance of polyether urethanes makes it more forgiving in steam autoclave cure processes than polyester grades.

Millathane® E40 is a sulfur or peroxide curable polyether millable polyurethane rubber used for the production of parts for many applications including rollers, seals, footwear, belting, and gaskets.

Thanecure® T9 Superfine is the dimer of 2,4-toluene diisocyanate (TDI). It is a polyfunctional isocyanate used as a vulcanizing agent for specialty millable polyurethane rubbers, as a crosslinker for adhesives and as an adhesion promoter for rubber-to-fabric bonding.

Millathane® 55 is a sulfur, peroxide or isocyanate curable polyether millable polyurethane rubber used for the production of rubber covered rollers, belting and other molded articles.

Millathane® 97 is a polyether polyurethane rubber having excellent transparency, good wear properties, a high coefficient of friction, and very good UV stability. This polyurethane rubber is designed for applications in shoe soling, roll coverings, and all other applications where transparent, brightly colored, or decorative products are desired.

Thanecure® ZM is a cure activator for sulfur cured Millathane® polyurethane rubber. It consists of a partial complex of zinc chloride and MBTS.

Millathane® 76M (Premilled) is a sulfur or peroxide curable polyester millable polyurethane rubber, used in many applications because of its excellent oil resistance, high damping characteristics and high strength and abrasion resistance properties.

Millathane® E34M (Premilled) is a sulfur or peroxide curable polyether millable polyurethane rubber used for production of parts for many applications including rollers, seals, footwear, belting and gaskets. Millathane E34 gives excellent strength and abrasion resistance properties, especially in sulfur cured compounds, and has very good processing characteristics.

Millathane® CM is a sulfur or peroxide curable polyether millable polyurethane rubber with excellent physical properties and abrasion resistance.

Millathane® 5004 is a peroxide-curable millable polyurethane rubber used for production of parts for many applications including seals, gaskets, rollers, and diaphragms.

Millathane® 76 is a sulfur or peroxide curable polyester millable polyurethane rubber, used in many applications because of its excellent oil resistance, high damping characteristics, and high strength and abrasion resistant properties.

Millathane® E34 is a sulfur or peroxide curable polyether millable polyurethane rubber used for the production of parts in applications including rollers, seals, footwear, belting, and gaskets. It gives excellent strength and abrasion resistance properties, especially in sulfur cured compounds, and has very good processing characteristics.

Millathane® 66 is a peroxide-curable millable polyurethane rubber for the production of oil, fuel, and chemical-resistant parts which require excellent low and high-temperature performance and high mechanical strength. As is typical of polyurethanes, it also has excellent abrasion resistance.

Millathane® 5004M (Premilled) is a peroxide-curable millable polyurethane rubber used for production of parts for many applications including seals, gaskets, rollers, and diaphragms.

Millathane® 66R is a peroxide-curable millable polyurethane rubber for the production of oil, fuel and chemical resistant parts which require excellent low and high temperature performance and high mechanical strength.

Millathane® 55M (Premilled) is a sulfur, peroxide or isocyanate curable polyether millable polyurethane rubber used for the production of rubber covered rollers, belting and other molded articles.

Millathane® 66RM (Premilled) is a peroxide-curable millable polyurethane rubber for the production of oil, fuel and chemical resistant parts which require excellent low and high temperature performance and high mechanical strength.

Millathane® UV is an ultra-violet curable millable polyurethane compound typically used with Millathane® 97, but other Grades can be used as well. Millable polyurethane extrusions can be continuously cured and products molded using UV light without the use of ovens, microwaves or salt bath units. (Patent Pending) These curable compounds can be extruded or calendered onto fabric or as an unsupported sheet and then continuously cured by passing them through a UV-curing conveyor belt chamber. Molded parts can be press-cured using special transparent molds to allow curing with UV light, or can be cured in a UV chamber. Time of irradiation varies with the nature and type of material, the type and concentration of other ingredients, and the type and power of the light source. They are great for extruding hollow tubing and other continuous shapes, such as bars, rods, L-channels, U-channels, square tubing, and the like. It’s great for extruded protective covering over all types of cables, hoses, and protective conduit.